• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.73-80
• /
• 2000

The paper is addressed to the topic of physiological response-specificity in disgust induced by visual stimulation. The purpose of this study was to evaluate reproducibility of physiological reactivity pattern during disgust elicited by the International Affective Pictures System (IAPS) in 2 experiments. Twenty-nine subjects participated in the first experiment with 3 visual stimulation sessions with disgust-eliciting slides (3 slides in each 1 min long session). In the second experiment disgust-eliciting slides from the IAPS were presented to 42 subjects in 2 sessions (one slide for 1 min). Spectral power of frontal EEG, skin conductance (SCL, SCR and NS.SCR), heart rate(HR), heart period variability(HPV) and respiration rate were recorded. Visual stimulation evoked 1:.n deceleration, higher power of high frequency component of HPV, increased SCL and NS.SCR frequency, frontal slow alpha blocking and moderate increase in fast beta power in most of the sessions in both experiments. However in the second experiment the EEG pattern associated with disgust showed inconsistent shifts in fast alpha and slow beta bands, but was marked by higher power of theta activity. Our data in both experiments emphasizes presence of disgust-specific profiles of autonomic and at the less extent EEG responses in visual stimulation context. Discussed are potential behavioral mechanisms leading to observed physiological manifestations in disgust elicited by visual stimulation. The results support the consideration that disgust is an withdrawal type negative valence emotion associated with relatively low autonomic arousal (low HR, low amplitude SCRs with relatively high NS.SCR frequency) and moderate EEG activation signs. Obtained data showed more consistent reproducibility of disgust-specific autonomic rather than EEG response patterns during visual stimulation design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1327-1330
• /
• 2004

An underwater robotic system has been developed and applied to visual inspection of reactor vessel internals. The Korea Electric Power Robot for Visual Test (KeproVt) consists of an underwater robot, a vision processor-based measuring unit, a master control station and a servo control station. The robot guided by the control station with the measuring unit can be controlled to have any motion at any position in the reactor vessel with $\pm$1 cm positioning and $\pm$2 degrees heading accuracies with enough precision to inspect reactor internals. A simple and fast installation process is emphasized in the developed system. The developed robotic system was successfully deployed at the Younggwang Nuclear Unit 1 for the visual inspection of reactor internals.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.96-101
• /
• 2002

In this paper, we address the problem of controlling an end-effector to track and grab a moving target using the visual servoing technique. A visual servo mechanism based on the image-based servoing principle, is proposed by using visual feedback to control an end-effector without calibrated robot and camera models. Firstly, we consider the control problem as a nonlinear least squares optimization and update the joint angles through the Taylor Series Expansion. And to track a moving target in real time, the Jacobian estimation scheme(Dynamic Broyden's Method) is used to estimate the combined robot and image Jacobian. Using this algorithm, we can drive the objective function value to a neighborhood of zero. To show the effectiveness of the proposed algorithm, simulation results for a six degree of freedom robot are presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.53-58
• /
• 2021

Operation of the interleaved Boost PFC converter in Critical Conduction Mode (CrM) shows the advantages of high efficiency and good EMI characteristics owing to the valley switching of FET. However, when it is designed for a highly pulsating load, operation at a relatively high frequency is inevitable at non-pulsating typical load condition, resulting in efficiency degradation. Moreover, the physical size of the inductor becomes problematic because of the nature of the CrM operation, where the inductor peak current is about two times the inductor average current, thereby requiring high DC-bias characteristics, which is worse when the output power is high. In this study, a new parallel driving method of two sets of interleaved boost PFC converters for highly pulsating high-power application is proposed. The proposed method does not require any additional load-sharing controller, resulting in high efficiency and smaller inductor size.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.145-152
• /
• 2009

We are surrounded by so many images these days. These images have their own meanings and have an effect on our subject, whether consciously or unconsciously. Michel Foucault disclosed that upon closer examination the rationalism deeply rooted in Western society was not made autonomously but involuntarily by heteronomous power. Because the emotion of image within this relationship can be effectively conveyed just through its being seen, the image has been used for controlling and mustering people through the adjustment of its meaning by power. With the advance of technology and media of today, the image in this visual power is out of the object for reproduction, and then forms a new paradigm of manipulation, transformation and reproduction and is being changed to the formation of Panopticon power and its corresponding relationship.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.125-134
• /
• 2009

The purpose of this study is to analyze the formative characteristics of power-shoulder jacket shown in 08/09 F/W and 09/10 F/W London, Paris, Milan, New York collection and extract main expression words for development of semantic differential scales of visual image according to the change in shoulder angle and width of power-shoulder jacket. The result of this study is as follows. Power-shoulder jacket which were worn by 1980 business women have similar cutting with men's suit jacket, but have characteristics of exaggerating the body figure as exaggerated shoulder with pad and tight waist like an inverted triangle silhouette. Power-shoulder jackets shown in collections used glossy and glittering material and dark colors and formed slim silhouette with matches of shoulder line of temperate senses and casual wear. Like this, the power-shoulder jacket was expanded to daily casual wear from traditional formal wear. Main expression words of visual image of jackets according to the changes in angle and width of shoulder differ greatly depending on the expansion degree of angle and width of shoulder. Changes in shoulder angle may look tense, stiff and too much according to the amount of changes. However, it also has the image of sharp but dignified and charismatic. Also, it helps to show body figure more efficiently like being slim and looking taller. Related to the current trend emphasizing shoulder among women, it is evaluated to be stylish and trendy. When the expansion degree is not too much, changes in shoulder width partly show slim and slender waist under the influence of wider shoulder with basic tailored jacket image. However, when the expansion degree is enlarged, image related to the body figure is more definite compared to other visual images.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.215-224
• /
• 2001

In order to comply with revised national regulationson radiological protection and to implement recent nuclear data and dose conversion factors, KOPEC developed a new point kernel gamma and beta ray shielding analysis computer program. This new code, named VisualShield, adopted mass attenuation coefficient and buildup factors from recent ANSI/ANS standards and flux-to-dose conversion factors from the International Commission on Radiological Protection (ICRP) Publication 74 for estimation of effective/equivalent dose recommended in ICRP 60. VisualShieid utilizes graphical user interfaces and 3-D visualization of the geometric configuration for preparing input data sets and analyzing results, which leads users to error free processing with visual effects. Code validation and data analysis were performed by comparing the results of various calculations to the data outputs of previous programs such as MCNP 4B, ISOSHLD-II, QAD-CGGP, etc.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1298-1306
• /
• 2016

Backlight has a major factor in power consumption of TFT-LCDs which are most popular in portable devices. There have been a lot of attempts to achieve power savings by backlight dimming. At the same time, the researches have shown image compensation due to decreased brightness of a displayed image. However, existing image compensation methods such as histogram equalization have some limits in completely satisfying the human visual system (HVS)-awareness. This paper proposes an enhanced dimming technique to obtain both power saving and HVS-awareness by combining pixel compensation and histogram specification for TFT-LCDs. This method executes a search algorithm and an automation algorithm employing simplified calculations for fast image processing. Experimental results showed that the proposed method achieved significant improvement in visual satisfaction per power saving over existing backlight dimming.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.188-194
• /
• 2020

This paper presents a high-efficiency Switch Mode Line Transformer (SMLT) composed of load-shared dual modules, which is based on the AC/AC LLC resonant converter. Given that the conventional adaptor is usually composed of two power stages, namely, the PFC and DC/DC converters, its system size can be increased according to the output power. However, given that the proposed SMLT can separate the PFC converter from the adaptor, the size reduction of the system can be achieved. Meanwhile, the SMLT with a single module has the limit of the size reduction because of a high resonant current. Thus, it can be configured with dual or multiple modules to reduce the resonant current. Then, their load sharing can be guaranteed by only the proposed transformer structure without an extra current controller. The validity of the proposed converter is proven through a 850-W prototype.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.141-154
• /
• 2015

The purpose of this study is to look for a development plan for strategic brand logo by a means of scrutinizing general characteristics and trend in the visual properties of outdoor logo brands. In this study, data research and analysis were conducted over the 68 outdoor brands in circulation in the domestic market based on the information on the website of each brand in order to examine the visual characteristics of an outdoor brand logo. For this, it was performed to examine the desired brand concept of each brand and to analyze the visual characteristics of typeface, color, and type of logo. The results of this research are the followings: First, it was found that the most popular typeface in outdoor brand logos is a capitalized Gothic type. It seems that the logo type is designed to symbolize power, toughness, and masculinity and to express the concept of sportswear brand. Second, when it comes to color, black color tone appeared most frequently, and also reddish colors among chromatic colors were prevailing over others like green, blue, or yellow. It is believed that reddish colors were used to express passion, power, youthfulness, and energy; black color tone for tough, masculine power. Third, the logo symbol of outdoor brands mostly contains mountain, the heads of powerful animals, spherical shape/abstract image that embodies outdoor sports activities. It was analyzed that these resulting symbols were chosen to convey the images of nature, conquest, challenge, future, and passion that are the brand concept of most outdoor brands. Today, in our country, the logo of an outdoor brand is the important factor that symbolizes the brand concept, function, or characteristics. Therefore, the necessity of constant follow-up researches is required to devise the way of designing the brand logo that can build brand power and enhance brand image.