• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.177-184
• /
• 2000

The purpose of this study is to evaluate the performance of a new viscosity modifying admixture for concrete agent. For this purpose, selected test variables were the ratio of water to cement, the ratio of cement to fine aggregate, contents of superplasticizer, contents of viscosity modifying admixture. As a result of this study, it has been found that addition of viscosity modifying admixture to mortar modfies its fluidity and reduces its segregation by increasing the mortar viscosity. And it has been found that a new viscosity modifying admixture do not significantly affect the setting time, air content of mortar.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.475-490
• /
• 2008

The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

• 대한영양사협회학술지
• /
• 제30권1호
• /
• pp.11-28
• /
• 2024

This study aimed to establish the optimal amount of thickening agent for the appropriate viscosity in soups and beverages, which are part of the dysphagia diet. The soups were bean sprout soup and soybean paste soup; the beverages were orange juice, regular milk, and low-fat milk; the thickening agent was one type of xanthan gum product. After adding the thickening agents (from 1 g to 5 g per 200 mL of the test food), syringe tests were conducted over time (5, 10 and 15 minutes) to verify the effects of the amount of thickening agent added per sample and the time between addition and achieving the resulting viscosity, and to establish the optimal addition conditions to reach IDDSI levels 1, 2, and 3 of the dysphagia diet. Water (based on 200 mL) was used as the standard control. These results provide a useful basis for customized diets based on the patient's dysphagia severity. On the other hand, this study is limited by including only liquid foods in the dysphagia diet and one type of xanthan gum-based thickening agent. Therefore, it is necessary to conduct continuous research, based on the study results, to modify the viscosity of the dysphagia diet using various thickening agents and foods and prevent nutritional deficiencies by managing the diet according to the patient's swallowing ability.

• 한국지반환경공학회 논문집
• /
• 제23권11호
• /
• pp.5-11
• /
• 2022

본 연구는 고로슬래그미분말(SG) 및 강섬유(SF)를 적용한 고유동 흙막이 벽체 재료(RWM)의 역학적 성능을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 고성능감수제, 공기연행제 및 증점안정화제를 굳지 않은 흙막이 벽체 재료에 적정량을 사용하였다. 흙막이 벽체 재료 경화체의 강도특성을 고찰하기 위하여 압축, 할열 인장 및 휨강도를 소정의 재령에서 측정하였으며, 표면전기저항, 흡수율 실험을 통하여 흙막이 벽체 재료의 역학적 성능을 평가하였다. 실험결과에 따르면 SGC 배합은 OPC 배합에 비하여 대체적으로 우수한 성능을 나타내었으며, SF는 흙박이 벽체 재료의 역학적 성능향상에 효과적인 것으로 조사되었다. 특히, SG의 사용은 흙막이 벽체 재료의 장기강도 발현 뿐만 아니라 차수성능 향상에 기여할 것으로 판단된다.

• 한국지반환경공학회 논문집
• /
• 제24권6호
• /
• pp.13-20
• /
• 2023

본 연구는 강섬유(SF) 혼입률에 따른 고유동 흙막이 벽체 재료(RWM)의 역학적 성능 및 내구성을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 적정량의 고성능감수제(SP), 공기연행제(AEA) 및 증점 안정화제(VMA)를 사용하였다. 흙막이 벽체 재료 경화체의 압축 및 쪼갬 인장강도를 소정의 재령에서 측정하였으며, 흙막이 벽체 재료의 역학적 성능은 표면전기저항성 및 흡수율 실험을 통하여 고찰하였다. 또, 염소이온 침투저항성 및 동결융해 저항성 실험을 통하여 흙막이 벽체 재료의 내구성능을 고찰하였다. 실험결과에 의하면, 강섬유를 적용한 배합이 강섬유 무혼입 배합에 비하여 우수한 성능을 나타내었으며, 2% 적용 배합이 경제성 및 성능 관점에서 상대적으로 효과적인 것으로 관찰되었다. 따라서, 적절한 SF의 적용은 흙막이 벽체 재료의 성능 향상에 기여할 것으로 판단된다.

• Elastomers and Composites
• /
• 제25권4호
• /
• pp.280-290
• /
• 1990

The effect of surface treatment of kaolinite with silane coupling agent on the reinforcement of SBR was investigated. The possibility of the practical use of kaolinite as an organic filler was also scrutinized and it was found that the reinforcement of SBR was improved by modifying surface of the cheap inactive inorganic filler with organic silane coupling agents. 3-Chloropropyltrimethoxysilane(C-series), 3-mercaptopropyltrimethoxysilane(M-series) and 3-aminopropyltriethoxysilane(A-series) were used as coupling agents. To test the material properties of vulcanized and unvulcanized SBR, Mooney viscosity, modulus, elongation and fractured surface measurements by SEM were carried out by changing the amount of silane coupling agents. Torqe of the unvulcanized SBR following the measurement of the degree of vulcanization was to be increased as the amount of silane was increasing, and Mooney viscosity of M-series and A-series was also increased.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.618-624
• /
• 1989

본 연구의 목적은 낮은 포화 압력하에서의 초음파에 의한 미세포 포움 구조 획득의 가능성을 평가하기 위한 것으로, 이 초음파 가공을 고분자 포움의 연속적인 압출 가공에 적용하기 위한 기초 연구를 이론적 및 실험적으로 수행함에 있다.따라서 미세포구조의 획득이 본 연구의 목적은 아니며 초음파를 이용한 열가소성 수지내의 핵생성 거동에 대한 고찰을 하고자 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.24-31
• /
• 2024

기존 대부분의 3D 콘크리트 프린팅 연구는 모르타르를 재료로 활용하고 있다. 다만, 굵은 골재를 포함한 콘크리트에 비해 모르타르를 사용할 경우에는 높은 바인더 함량과 잔골재량으로 인하여 경제성이 저하될 수 밖에 없다. 따라서, 3D 프린팅 기술의 건설산업 적용 확대를 위해서는 굵은 골재를 사용한 콘크리트 3D 프린팅에 대한 연구가 요구된다. 본 연구에서는 굵은 골재가 포함된 3D 프린팅 용 콘크리트의 배합설계 프로세스를 제안하고자 하였다. 다양한 문헌연구 및 배합실험을 참고하여 3D 프린팅에 적합한 배합을 도출하였으며, 출력실험을 통하여 압출성을 검증하였다. 콘크리트 배합의 증점제(Viscosity modifying agent, VMA) 함량을 출력실험의 변수로 설정하였으며, 출력된 필라멘트의 치수 적합성, 골재분포도, 표면 품질을 평가하여 압출성능을 검증하였다. 실험결과, VMA의 함량이 높은 배합이 더 우수한 치수 적합성과 표면 품질을 보였으며, VMA 함량이 다름에도 불구하고 모든 배합에서 골재분포가 균등하게 나타났다. 실험결과를 바탕으로 굵은 골재가 포함된 콘크리트의 압출성을 향상 시킬 수 있는 배합설계 프로세스를 도출하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.546-546
• /
• 2008

Copper (Cu) Chemical mechanical polishing (CMP) has been an essential process for Cu wifing of DRAM and NAND flash memory beyond 45nm. Copper has been employed as ideal material for interconnect and metal line due to the low resistivity and high resistant to electro-migration. Damascene process is currently used in conjunction with CMP in the fabrication of multi-level copper interconnects for advanced logic and memory devices. Cu CMP involves removal of material by the combination of chemical and mechanical action. Chemicals in slurry aid in material removal by modifying the surface film while abrasion between the particles, pad, and the modified film facilitates mechanical removal. In our research, we emphasized on the role of chemical effect of slurry on Cu CMP, especially on the effect of amine functional group on removal rate selectivity between Cu and Tantalum-nitride (TaN) film. We investigated the two different kinds of complexing agent both with amine functional group. On the one hand, Polyacrylamide as a polymer affected the stability of abrasive, viscosity of slurry and the corrosion current of copper film especially at high concentration. At higher concentration, the aggregation of abrasive particles was suppressed by the steric effect of PAM, thus showed higher fraction of small particle distribution. It also showed a fluctuation behavior of the viscosity of slurry at high shear rate due to transformation of polymer chain. Also, because of forming thick passivation layer on the surface of Cu film, the diffusion of oxidant to the Cu surface was inhibited; therefore, the corrosion current with 0.7wt% PAM was smaller than that without PAM. the polishing rate of Cu film slightly increased up to 0.3wt%, then decreased with increasing of PAM concentration. On the contrary, the polishing rate of TaN film was strongly suppressed and saturated with increasing of PAM concentration at 0.3wt%. We also studied the electrostatic interaction between abrasive particle and Cu/TaN film with different PAM concentration. On the other hand, amino-methyl-propanol (AMP) as a single molecule does not affect the stability, rheological and corrosion behavior of the slurry as the polymer PAM. The polishing behavior of TaN film and selectivity with AMP appeared the similar trend to the slurry with PAM. The polishing behavior of Cu film with AMP, however, was quite different with that of PAM. We assume this difference was originated from different compactness of surface passivation layer on the Cu film under the same concentration due to the different molecular weight of PAM and AMP.