• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1738-1747
• /
• 2003

Smoothed Particle Hydrodynamics (SPH), a pure Lagrangian numerical method, is applied to analysis of penetration phenomenon of bumper plate which is installed outside of spacecraft hull to protect the spacecraft against hypervelocity meteorite impact. Effects of SPH parameters, such as artificial viscosities, smoothing lengths, numbers of particles and time increments, are analysed by comparing the SPH simulation results with experimental ones with regard to subsequent formation of debris cloud. An optimum range of parameter values is determined by error analysis and various SPH numerical results are compared with experiments.

• Korea-Australia Rheology Journal
• /
• 제11권4호
• /
• pp.321-328
• /
• 1999

This paper discusses the rheology of complex interfaces comprised of amphiphilic materials that are susceptible to flow-induced orientation and deformation. The consequence of the coupling of the film micro-structure to flow leads to nonlinear rheology and surface fluid dynamics. Experimental methods designed to determine the mechanical rheological material functions of fluid-fluid interfaces as well as local, molecular and morphological responses are presented. These include a newly developed interfacial stress rheometer, flow ultraviolet dichroism, and Brewster-angle microscopy. These techniques are applied to a number of complex interfaces ranging from low molecular weight amphiphiles to polymer monolayers. Nonlinear flow phenomena ranging from two-dimensional nematic responses to highly elastic surface flows that manifest surface normal stress differences and elongational viscosities are described.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.115-123
• /
• 2001

In recent years, compression molding of long fiber-reinforced thermoplastics has been increased in commercial aspects. In the process of compression molding of composites, the flow analysis must be developed in order to accurately predict the finished part properties as a function of the molding process parameters. In this model FRTP is assumed to be nonisothermal fluid, which has different viscosities in extensional and in shear. For verification of the model, the formation of a knit line in the L-shaped parts is compared with that of experiments results. In this paper we will discuss the effects of extensional & shear viscosity ratio and slip parameter $\alpha$ on the other modle fill-ing parameters.

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.83-85
• /
• 1993

밤을 $0.15{\sim}0.45\;kGy$ 범위의 감마선으로 처리하고 이로부터 분리한 전분의 성질을 조사하였다. 감마선 처리에 따라 전분의 물결합 능력은 다소 증가되었고, 고유점도와 아밀로그래프 점도는 일정하게 감소되었다(r=-0.950). 그러나 전분의 팽윤력, blue value 및 광투과도는 발아억제 선량범위에서 변화되지 않았다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3527-3531
• /
• 2014

In this paper, we report thermodynamic and transport properties (diffusion coefficient, viscosity, and thermal conductivity) of diatomic gases ($H_2$, $N_2$, $O_2$, and $Cl_2$) at 273.15 K and 1.00 atm by performing molecular dynamics simulations using Lennard-Jones intermolecular potential and modified Green-Kubo formulas. The results of self-diffusion coefficients of diatomic gases obtained from velocity auto-correlation functions by Green-Kubo relation are in good agreement with those obtained from mean square displacements by Einstein relation. While the results for viscosities of diatomic gases obtained from stress auto-correlation functions underestimate the experimental results, those for thermal conductivities obtained from heat flux auto-correlation functions overestimate the experimental data except $H_2$.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.86-92
• /
• 1997

When Lubricants is used under severe running condition, tribological characteristics is very important. I have studied the lubricating oil viscosity, kinds of additives and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. Moreover, the temperatures of three kinds of oils which have very different viscosities at room temperature, were varied while the oil viscosity was unchanged. It was shown from the test results that wear is not greatly affected by the amount of ZnDTP antiwear agent, but E-P additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its tempea-ature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the lower the scratch of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.632-636
• /
• 2003

To prepare the alumina cement free vibrated alumina castable, $\rho$-alumina is employed as a binder material, and nano-sized clay is added to enhance the curing strength and give thixotropic behavior. The rheological behavior of matrix of castable is controlled by investigating the influences of ultrafines, $\rho$-alumina, and nano-sized clay on the viscosity of matrix. The microsilica and ultrafine alumina were added 3 wt% and 4 wt%, respectively to the matrix, which showed that the viscosities tends to be lowest values. The rheological property of the matrix is well established by adding $\rho$-alumina as 8 wt% and clay as 4 wt%. The thixotropic behavior of the $\rho$-alumina bonded castable was appeared by introducing nano-sized clay into the matrix and adjusting the pH near to the PZC of the clay suspension.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.156-160
• /
• 2003

Poly(ethylene 2,6-naphthalate) (PEN)/Poly(ethylene glycol) (PEG) copolymers were synthesized by two step reaction during the melt copolymerization process. The first step was the esterification reaction of dimethyl-2,6-naphthalenedicarbox-ylate (2,6-NDC) and ethylene glycol (EG). The second step was the condensation polymerization of bishydroxyethylnaphthalate (BHEN) and PEG. The copolymers contained 10 mol% of PEG units with different molecular weights. Structures and thermal properties of the copolymers were studied by using $^1{H-NMR}$, DSC, TGA, etc. Especially, while the intrinsic viscosities of PEN/PEG copolymers increased with increasing molecular weights of PEG, but the glass transition temperature, the cold crystallization temperature, and the weight loss temperature of the copolymers decreased with increasing molecular weights of PEG. Consequently, the hydrophilicities by means of contact angle measurement and moisture content of the copolymer films were found to be significantly improved with increasing molecular weights of PEG.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.393-398
• /
• 1999

The temperature dependence of the viscosity was determined for an electrorheological(ER) fluid consisting of 35 weight% zeolite particles in hydraulic oil 46cSt. Thermal activation analysis were performed by changing the ER fluid's temperature from -1$0^{\circ}C$ to 5$0^{\circ}C$ at fixed electric field. According to the analysis, the activation energy for flow was about 79.64kJ/mole at E=0kV/mm. Generally, the hydraulic oil 46cSt will be operated at the temperature of about 4$0^{\circ}C$, the ER fluid's electric field dependence of viscosities were investigated at this temperature. also, the influence of adding the dispersant(Carbopl 940) on electrorheological effect of the ER fluid was discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1752-1757
• /
• 2008

Simple and highly efficient droplet merging method is proposed, which enables two nanoliter or picoliter droplets to merge regularly in a straight microchannel. We observe that two droplets of the same size but of different viscosities are merged by velocity difference induced as they are transported with the carrier fluid. To make viscosity difference, the mass ratio of water and glycerol is varied. Two droplets of the same size or of different sizes are generated alternatingly in the cross channel by controlling flowrates. This droplet merging method can be used to mix or encapsulate one target sample with another material, so that it can be applied to cell lysis, particle synthesis, drug discovery, hydrogel-bead production, and so on.