• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.149-157
• /
• 1994

In this study two dimensional visco-plastic finite element model capable of handling the multi-step excavation was developed for investigating the effect of excavation support sequences on the behavior of underground openings in the jointed rock mass. First, the finite element model which is capable of handling the multi-step excavation is developed and verified. And then the model is combined with visco-plastic joint model. Ubiquitous joint pattern was considered in the model and joint properties in cach set were assumed to be indentical. Passive, full-grouted rockbolts were cosidered in the numerical model. The visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Conlomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-suppport sequences. The reliability and applicability of the model to the stability analysis for the underground excavation in pratice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.187-220
• /
• 2015

Soil disturbance induced by installation of mandrel driven vertical drains decreases the in situ horizontal hydraulic conductivity of the soil in the vicinity of the drains, decelerating the consolidation rate. According to available literature, several different profiles for the hydraulic conductivity variation with the radial distance from the vertical drain, influencing the excess pore water pressure dissipation rate, have been identified. In addition, it is well known that the visco-plastic properties of the soil also influence the excess pore water pressure dissipation rate and consequently the settlement rate. In this study, a numerical solution adopting an elastic visco-plastic model with nonlinear creep function incorporated in the consolidation equations has been developed to investigate the effects of disturbed zone properties on the time dependent behaviour of soft soil deposits improved with vertical drains and preloading. The employed elastic visco-plastic model is based on the framework of the modified Cam-Clay model capturing soil creep during excess pore water pressure dissipation. Besides, nonlinear variations of creep coefficient with stress and time and permeability variations during the consolidation process are considered. The predicted results have been compared with V$\ddot{a}$sby test fill measurements. According to the results, different variations of the hydraulic conductivity profile in the disturbed zone result in varying excess pore water pressure dissipation rate and consequently varying the effective vertical stresses in the soil profile. Thus, the creep coefficient and the creep strain limit are notably influenced resulting in significant changes in the predicted settlement rate.

• 한국지반공학회지:지반
• /
• 제4권3호
• /
• pp.53-62
• /
• 1988

地盤土가 長時間에 걸쳐서 파괴강도보다 작은 一定持續力下에 있게 되면 시간의 경과와 더불어 크리이프(Creep)현상에 의해 변형이 지속적으로 증가되어 파괴에 이르기도 한다. 이러한 creep거동에 의한 地盤變形은 지반의 탄성.점성.소성특성에 따라 다양하게 나타난다. 따라서 본 연구에서는 固結土에 대한 일축 크리이프실험결과로부터 고결토의 점.소성특성에 대해 고찰하였다. 연구결과 물유리계약액고결토의 流變學的 모델(Rheological Model)은 Vyalov의 모델로 결정할 수 있으며, 고결토의 점.소성특성은 硅酸鹽(Silicate) 농도와 밀접한 관계가 있음이 발견되었다.

• 터널과지하공간
• /
• 제14권3호
• /
• pp.215-228
• /
• 2004

지하암반의 변형은 단층, 절리 등의 불연속면을 따라 발생하므로 불연속면의 역학적 특성과 공간적인 분포형태는 구조물의 안정성에 근 영향을 미친다. 한편 연약암반에 높은 응력이 작용하는 경우에는 불연속면뿐만 아니라 무결암에서의 변형이 구조물의 안정성에 영향을 줄 수 있다. 이 연구에서는 암반구조물의 안정성 해석을 위하여 무결암과 절리, 그리고 록볼트를 점소성(visco-plastic) 재료로 가정하고, 연속체 개념을 적용하여 유변학적 모델(Rheological model)에 기초한 2차원 점소성 유한요소 프로그램을 개발하였다. 무결암 모델, 절리암반 모델, 록볼트로 보강된 절리암반 모델의 분석을 통하여 개발된 프로그램을 검증하였고, 각각의 모델에서 무결암의 해석 조건(탄성/점소성)에 따른 변위의 차이를 알아보았다. 연약암반에 높은 응력이 작용할 때, 무결암을 탄성으로 해석한 경우보다 점소성으로 해석한 경우에서 지하구조물의 변위가 더 크게 나타났다. 따라서 연약암반 내 지하구조물의 안정성 해석을 위해서는 절리와 록볼트 뿐만 아니라 무결암에 대해서도 점소성 모델을 적용하는 것이 바람직한 것으로 판단되었다.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.123-133
• /
• 1995

A two dimensional visco-plastic finite element model capable of handling the multistep excavaton was developed for investigating the effect of excavation-support sequences on the behaviour of underground openings in the jointed rock mass. Ubiquitous joint pattern was considered in the model and joint properties in each set were assumed to be identical. Passive, fully-grouted rockbolts were considered in the model. Visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Coulomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-support sequences. The reliability of the model to the stability analysis for the underground excavation in practice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.769-777
• /
• 2015

본 연구에서는 속도 의존성을 나타내는 콘크리트의 인장거동을 모사하기 위하여 유변학적(rheological) 모델을 개발하였고 이를 평가하였다. 일반적으로 외부에서 가해지는 하중 속도가 증가할수록 콘크리트의 물성(강도, 탄성계수, 파괴에너지 등)은 그 크기가 증가한다. 콘크리트의 강도는 다른 물성에 비하여 큰 속도의존성을 나타내고, 압축 하중인 경우보다 인장 하중을 받는 경우 그 속도의존성이 크게 나타난다. 이러한 콘크리트의 속도 의존성을 모사하기 위하여, 기존 RBSN(Rigid-Body-Spring-Network) 모델의 거동을 나타내는 스프링 세트에 대쉬포트(Dashpot)와 같은 점성 요소와 Coulomb 마찰 요소를 조합하였다. 요소의 조합에 따라 세 가지 모델( 1)점탄성, 2)점소성, 3)점탄소성 손상(Damage 모델)을 고려하였고, 이에 대한 구성관계식을 유도하였다. 개발된 해석모델은 직접인장 실험의 응력-변형률 관계곡선과 비교 검증되었고, 이중 점탄소성 손상 모델은 실험결과를 잘 모사할 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.162-172
• /
• 1993

In the present paper, the overall state of the arts of ice mechanics which is the most typical research topic of the artic engineering field was studied. And also, ice loads genrated by ice-structure interaction were estimated using numerical approach. The effects of viscous property of ice sheets to the ice load were investigated. The time dependent deformation behaviors of ice was modeled by visco-plastic problem using the finite element formalism. Constitutive model representing the material properties of ice was idealized by comblned rheological model with Maxwell and Voigt models. Numerical calculations for the bending and crushing behavior of ice sheet which are the most typical interaction modes between ice sheets and structures were carried out. The time dependent viscous behaviors of ice sheets interaction forces acting on structures were analyzed and the results were studied in detail.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1995

The behavior of the work materials in the chip-tool interface in extremely high strain rates and temperatures is more that of viscous liquids than that of normal solid metals. In these circumstances the principles of fluid mechanics can be invoked to describe the metal flow in the neighborhood of the cutting edge. In the present paper an Eulerian finite element model is presented that simulates metal flow in the vicinity of the cutting edge when machining a low carbon steel with carbide cutting tool. The work material is assumed to obey visco-plastic (Bingham solid) constitutive law and Von Mises criterion. Heat generation is included in the model, assuming adiabatic conditions within each element. the mechanical and thermal properties of the work material are accepted to vary with the temperature. The model is based on the virtual work-stream function formulation, emphasis is given on analyzing the formation of the stagnant metal zone ahead of the cutting edge. The model predicts flow field characteristics such as material velocity effective stress and strain-rate distributions as well as built-up layer configuration

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.140-143
• /
• 2001

To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

• 소성∙가공
• /
• 제17권7호
• /
• pp.517-522
• /
• 2008

A visco-plastic self-consistent (VPSC) polycrystal model has been applied to simulate texture simulation and anisotropic properties of DP steels during deep drawing process. In order to evaluate the strain path during deep drawing, a steady state was assumed in the flange part of deep drawn cup. The final stable orientations were strongly dependent on the initial location in the blank. The evolution of anisotropy of DP steel sheets has been demonstrated through comparison of plastic strain rate vector at the different plastic strain levels.