• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.203-206
• /
• 2000

In the multi-purpose lathe, the design of tilting turret slide system has an important and critical role to enhance the accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, the 3-axis slide system with tilting turret unit is researched with two approaches; The first is that 3-axis slide system is modeled and simulated usig ADAMS software. The dynamic behavior of this system is visualized by data graphs and dynamic animations. The first step of virtual prototype which makes it possible to design economically and effectively is developed.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.670-682
• /
• 1998

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of washing machine effectively. The test results match with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variableand can reduce the design cycle sharphy. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.744-750
• /
• 2019

A new type of auto-rotary PM mechanical flux-varying PM machine (ARPMMFVPMM) is proposed in this paper, which can overcome the problem where the air-gap magnetic field of a PM machine is difficult to freely adjust. The topology structures of the machine and the mechanical flux-adjusting device are given. In addition, the operation principle of flux-adjusting is analyzed in detail. Furthermore, the deformation of a spring with the speed variation is obtained by virtual prototype technology. Electromagnetic characteristics including the flux distribution, air gap flux density, flux linkage, electromagnetic-magnetic-force (EMF), and flux weakening ability are computed by 2D finite element method (FEM). Results show that the machine has some advantages such as the good field control ability.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.182-189
• /
• 2006

Consumers can choose suitable shoes for their feet in off-line shopping. However, in on-line shopping, because they can not wear shoes, compare to the off-line shopping, there are many problems in internet shopping. And the solution of user-oriented internet shopping is development of new type of prototype which is accessible to user and to offer visual information through 3D-virtual reality. We made this Prototype that the consumer can measure their own shoes size. And the consumer can print out their foot size in the internet database and measure their own foot size and type. And we maximized the visual experience though it is indirect and then we wanted to overcome a emotional experience in the real world. we visualized first, 'the softness' of shoes meterial, second 'the drainage' in the realtion of shoes meterial and water, third 'the close adhesion' in the realtion of shoes and consumer's their own foot and last 'the elasticity' in the relation of the shoes outer sole and surface. The result of this research can solve the problem in the existing on-line shoes' shop and it will become an alternative plan. And this prototype just will not become the localization at the on-line shoes' shop. In true sense, it will be an important example in the whole internet industry.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.91-103
• /
• 2006

It seems necessary to have a new methodology to develop the complex embedded system in a short time with a small amount of money and secure the reliability of products. For this in this study, the investigator presents the state-of-the-art technology with which the limitation of physical prototyping and virtual prototyping can be overcome. Also as a developing methodology of the em-bedded system in which the new technology is applied, the investigator suggests a new methodology of developing process for the integrated design, integrated simulation, and debugging of the physical prototyping and the virtual prototyping.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.45-55
• /
• 1998

The purpose of our study is to develop a prototype groupware environment that addresses the different phases of meetings as well as to provide for customizable meetings. We describe several components that can be used to support the entire life-cycle of a distributed meeting. Our design is based on the premise that meetings are comprised of three stages: pre-meeting setup, during meeting activities, and post-meeting teardown. Additionally, meetings are individual, each requiring a different set of tools and applications. Our protype contains six components to support these stages. These components are electronic mail, bulletin board, organizer, agendas, virtual meeting room, and storyboard viewer.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.86-87
• /
• 2003

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.302-312
• /
• 2021

The purpose of this study was to develop prototype of virtual reality(VR) simulation with malocclusion models and evaluate its applicability. Task abilities, task completion time, and a satisfaction survey were compared between dentist trainees and dental students. Participants were instructed to observe virtual malocclusion models and then performed three tasks to diagnose the type of malocclusion, determine clinical findings and develop treatment plans. Their satisfaction with the simulation experience were evaluated using a questionnaire containing five questions. Task abilities of trainees related to clinical features and treatment plans were significantly higher than that of students(p < 0.01). In both groups, the task completion time for the second case was significantly reduced compared to that for the first case(p < 0.01). The satisfaction survey showed high scores and positive responses for this simulation in both groups. If the prototype of VR simulation is continuously advanced, it will be applicable for orthodontic education in pediatric dentistry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.48-55
• /
• 2018

A framework has recently been developed to evaluate the user experience (UX) design for a virtual reality (VR) indoor bike. However, no comparative evaluation has been performed for an actual product using this framework. This paper investigates the effectiveness of the framework and identifies some problems when applying it. To validate the framework, we applied the proposed framework to a Korean VR indoor bike (KoVIB) prototype and VirZOOM, a commercial VR bike. The evaluation criteria consist of usability, emotional aspects, user values, and sense of reality. These four criteria were interpreted to evaluate prototypes and include 13, 6, 8, and 16 sub-elements, respectively. The results revealed the strengths and weakness between the Korean prototype and the commercial product, which are valuable for promotion and improvement. The framework helps to identify some problems when applied to real domains. As a result, we recommend a revised framework to compare prototypes with existing VR bikes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.703-713
• /
• 2011

In this study, to minimize trial and error in the design and manufacturing processes of a high-precision large-surface micro-grooving machine which is able to fabricate the molds for 42 inch LCD light guide panels, the effects of the structural deformation of the micro-grooving machine according to the positions of the X-axis, Y-axis and Z-axis feed systems were examined on the tool tip displacement errors associated with the machining accuracy. The virtual prototype (finite element model) of the micro-grooving machine was constructed to include the joint stiffnesses of the hydrostatic bearings, hydrostatic guideways and linear motors, and then the tool tip displacement errors were measured from the virtual prototype. Especially, to establish the prediction model of the tool tip displacement errors, which was constructed using the positions of the X-axis, Y-axis and Z-axis feed systems as independent variables, the response surface method based on the central composite design was introduced. The reliability of the prediction model was verified by the fact that the tool tip displacement errors obtained from the prediction model coincided well those measured from the virtual prototype. And the causes of the tool tip displacement errors were identified through the analysis of interactions between the positions of the X-axis, Y-axis and Z-axis feed systems.