• 제목/요약/키워드: Vinyl ether

검색결과 112건 처리시간 0.024초

국내 발암물질 배출량 특성과 암발생 추이에 관한 연구 (Study on the Characteristics of Carcinogenic Pollutant Emissions and Cancer Incidence Rates in Korea)

  • 임지영;김보경;김현지;윤정현;허화진;이지호;이상목;이청수
    • 한국환경보건학회지
    • /
    • 제44권2호
    • /
    • pp.160-168
    • /
    • 2018
  • Objectives: The purposes of the study were to investigate hazardous pollutant emissions changes among group 1 carcinogens. The emissions characteristics were compared with national cancer registration statistics. Methods: A survey of group 1 carcinogen hazardous pollutant emissions (trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, ethylene oxide, chromium and its compounds, 3,3'-dichloro-4,4-diaminodiphenylmethane, chloromethyl methyl ether, arsenic and its compounds, cadmium and its compounds, o-toluidine) was conducted through a homepage for 2001-2015. The emission of hazardous chemicals and the cancer trend analysis for 2001-2015 were performed using the Korean statistical information service through its homepage as a reference. Results: Emissions of more than 95% of the substances listed as group 1 carcinogens over the last five years were made up of trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, and ethylene oxide. As a result of the comparison of emission results and cancer incidence rates, carcinogen pollutant emissions showed a tendency to decrease continuously. In addition, the incidence of cancer tended to increase, but showed a tendency to decrease from 2012. Conclusion: The results indicate hazardous pollutant emissions have continued to increase. However, no association between emissions and health effects was shown and more research is needed.

가교된 PVA 막을 이용한 MTBE/methanol 혼합물의 증기투과(Vapor Permeation)분리 (Vapor Permeation Separation of MTBE-Methanol Mixtures Using Cross-linked PVA Membranes)

  • 김연국;임지원
    • 멤브레인
    • /
    • 제10권3호
    • /
    • pp.148-154
    • /
    • 2000
  • 본 연구에서는 sulfur-succinic acid의 가교제를 이용한 가교된 폴리비닐알코올(poly(vinyl alcohol), PVA) 가교막을 이용하여 MTBE-methanol 혼합액에 대하여 조업온도, 가교제의 조성에 따른 증기투과 공정의 투과 특성을 조사 하였다. 팽윤 실험을 통해 PVA/SSA 가교막에 대하여 가교제 조성에 따른 막의 구조와 PVA의 하이드록실기(-OH), SSA의 설폰기(-$SO_3$H)와 용매와의 수소결합의 두 가지 인자가 상호 보완적으로 작용하고 있음을 알 수 있었다. 투과 특성에 있어 SSA의 설폰기가 중요한 인자로 작용하였다. 예를 들면 7% SSA 막에 대해서는 수소결합의 효과보다는 가교도의 효과가 투과 특성에 중요한 요인으로 작용하며 5% SSA에 대해서는 수소결합의 효과가 중요하게 작용하였다. 증기투과 공정에 있어 막과 직접 접촉하는 증기상이 액상에 비하여 methanol의 농도가 낮아 PVA의 하이드록실기와 methanol과의 수소결합 확률이 감소함에 따라 투과 특성에 영향을 미친다. 결과적으로 7% SSA 막에 대하여 MTBE/mthanol=80/20 혼합액에 대하여 공급액의 온도 3$0^{\circ}C$에서 선택도 2187, 투과도 4.84g/$m^2$hr를 보여 주었다.

  • PDF

철-디피리딜-메페남산 삼원착물을 이용한 메페남산의 정량 (Determination of Mefenamic Acid with Fe(II)-Dipyridyl-Mefenamic Acid Ternary Complex as Ion-exchagner)

  • 남수자;문현숙;이미나;정문모;허문희;안문규
    • 분석과학
    • /
    • 제14권1호
    • /
    • pp.59-63
    • /
    • 2001
  • 철-디피리딜-메페남산 삼원착물을 이온교환체로, NPOE(o-nitrophenyl octyl ether)를 가소게, PVC[poly(vinyl chloride)]를 지지체로 사용한 메페남산 이온선택성막 전극을 제작하였다. 디피리딜 화합물은 2,2'-디피리딜, 4,4'-디피리딜 그리고 4,4'-디페닐-2,2'-디피리딜을 이용하였다. 이들 막전극은 pH 8.9의 붕산완충액 중에서 $10^{-5}{\sim}10^{-3}mol/L$ 농도의 메페남산에 대하여 감응전위가 -55.98, -49.47 그리고 -59.35mV/decade를 각각 나타내는 직선성이었다. 방향족 및 지방족 카복실산염의 존재는 전극의 감응에 지장을 주지 않았다.

  • PDF

Enhanced Bioavailability of Ambroxol by Transdermal Administration of the EVA Matrix Containing Penetration Enhancer in Rats

  • Choi, Jun-Shik;Shin, Sang-Chul
    • Biomolecules & Therapeutics
    • /
    • 제18권1호
    • /
    • pp.106-110
    • /
    • 2010
  • The pharmacokinetics and bioavailability of ambroxol, an expectoration improver and mucolytic agent, were studied to determine the feasibility of enhanced transdermal delivery of ambroxol from the ethylene-vinyl acetate (EVA) matrix system containing polyoxyethylene-2-oleyl ether as an enhancer in rats. The ambroxol-010 matrix system (15 mg/kg) was applied to abdominal skin of rats. Blood samples were collected via the femoral artery for 28 hrs and the plasma concentrations of ambroxol were determined by HPLC. Pharmacokinetic parameters were calculated using Lagran method computer program. The area under the curve (AUC) was significantly higher in the enhancer group ($1,678{\pm}1,413.3\;ng/ml{\cdot}hr$) than that in the control group $1,112{\pm}279\;ng/ml{\cdot}hr$), that is treated transdermally without enhancer, showing about 151% increased bioavailability (p<0.05). The average $C_{max}$ was increased in the enhancer group ($86.0{\pm}21.5\;ng$/ml) compared with the control group ($59.0{\pm}14.8\;ng$/ml). The absolute bioavailability was 13.9% in the transdermal control group, 21.1% in the transdermal enhancer group and 18.1% in the oral administration group compared with the IV group. The $T_{max}$, $K_a$, MRT and $t_{1/2}$ of ambroxol in transdermal enhancer group were increased significantly (p<0.01) compared to those of oral administration. As the ambroxol-EVA matrix containing polyoxyethylene-2-oleyl ether and tributyl citrate was administered to rats via the transdermal routes, the relative bioavailability increased about 1.51-fold compared to the control group, showing a relatively constant, sustained blood concentration. The results of this study show that ambroxol-EVA matrix could be developed as a transdermal delivery system providing sustained plasma concentration.

복합막 제조를 위한 가교된 폴리비닐알코올 막의 특성 평가와 이를 이용한 투과증발 분리 (Characterization of Crosslinked Poly(vinyl alcohol) Membranes for the Preparation of Composite Membranes and Its Application to Pervaporation Separation)

  • 김연국;이정민;임지원;이영무
    • 멤브레인
    • /
    • 제9권3호
    • /
    • pp.157-162
    • /
    • 1999
  • 본 실험실에서 개발된 sulfur-succinic acid의 가교제를 이용한 가교된 폴리비닐알코올 (poly(vinyl alcohol), PVA) 균일막은 15$0^{\circ}C$에서 반응이 일어나므로 복합막을 제조할 때 지지체의 가공구조을 파괴할 우려가 있어 반응온도를 10$0^{\circ}C$이하로 낮추고자 하였다. 이 때 촉매로서 염산이 사용되었고, 결과 막은 가교반응의 유무를 관찰하기 위하여 화학적.열적 분석을 행하였다. 이로부터 반응온도 10$0^{\circ}C$, 반응시간 90분, 촉매(염산) 농도 1.5%일 때 최적의 막을 제조할 수 있는 조건을 알 수 있었다. 또한 폴리설폰 한외여과 막 위에 coating하여 복합막을 제조하였으며 , 이의 분리특성을 조사하기 위하여 메틸터셔리부틸에테르/메탄올 혼합액에 대하여 조업온도 30, 40, 5$0^{\circ}C$에서 투과증발실험을 수행하였다. 실혐 결과 공급액의 온도 5$0^{\circ}C$에서 5.09g/$m^2$hr의 투과도와 3$0^{\circ}C$에서 1622의 선택도를 얻었다.

  • PDF

Novel Tm(III) Membrane Sensor Based on 2,2'-Dianiline Disulfide and Its Application for the Fluoride Monitoring of Mouth Wash Preparations

  • Ganjali, Mohammad Reza;Norouzi, Parviz;Tamaddon, Atefeh;Husain, Syed Waqif
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권9호
    • /
    • pp.1418-1422
    • /
    • 2006
  • In this work the construction of a novel poly(vinyl chloride) membrane sensor based on 2,2'-dianiline disulfide (DADS) as a neutral carrier, o-nitrophenyloctyl ether (NPOE) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic site with unique selectivity towards Tm(III) ions is reported. The electrode has a linear dynamic range between $1.0\;{\times}\;10^{-6}$ and $1.0\;{\times}\;10^{-2}$ M, with a nice Nernstian slope of 19.5 ${\pm}$ 0.3 mV per decade and a detection limit of $4.0\;{\times}\;10^{-7}$ M at the pH range of 4.8-8.5. It has a very fast response time (<15 s) in the whole concentration range, and can be used for at least 4 weeks without any considerable divergence in the electrode potentials. The proposed sensor revealed comparatively good selectivity with respect to most common metal ions, and especially lanthanide ions. It was used as an indicator electrode in the potentiometric titration of Tm(III) ions with EDTA and in direct determination of concentration of Tm(III) ions in binary mixtures. It was also applied in determination of fluoride ions in mouth wash preparations.

Materials for Step and Flash Imprint Lithography

  • Willson C. Grant;Hao Jianjun;Stewart Michael;Nishimura Yukio;Palmieri Frank;Jen Wei-Lun;Dickey Michael;Chan, Andrew;Wu Kai;Ekerdt John;Owens Jordan;Wetzel Jeffery T.
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.41-41
    • /
    • 2006
  • Step and Flash Imprint Lithography is an interesting low cost alternative to traditional microlithographic processes that offers the ability to efficiently produce nanostructures at unprecedented resolution. New photopolymerizable formulations are required to enable this process. This paper will describe progress in the design and development of acrylate and vinyl ether based platforms for this application together with efforts to prepare photopolymerizable, thermally stable, magterials with low dielectric constants for use in an efficient new method for fabricating the interconnect structures in microprocessors.

  • PDF

Rediscovery of a Broad Array of Lewis Acids for Living Cationic Polymerization in the Presence of an Added Base

  • Kanaoka, Shokyoku;Kanazawa, Arihiro;Aoshima, Sadahito
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.325-325
    • /
    • 2006
  • Cationic polymerization of isobutyl vinyl ether using various metal halides was examined in toluene in the presence of an added base at $0^{\circ}C$. In conjunction with an appropriate weak base such as ethyl acetate or 1,4-dioxane, all metal halides but $FeBr_{3}\;and\;GaCl_{3}$ led to living cationic polymerization. The polymerization rates varied as follows: $FeBr_{3},\;GaCl_{3}\;>\;FeCl_{3}\;>\;SnCl_{4}\;>\;InCl_{3}\;>\;ZnCl_{2}\;>>\;AlCl_{3},\;HfCl_{4},\;ZrCl_{4}\;>\;EtAlCl_{2},\;BiCl_{3},\;TiCl4\;>>\;SiCl_{4}\;>\;GeCl_{4}$. This order partially corresponds to that of the equilibrium constant in the formation of a carbocation from a chloroalkane in the presence of a carbonyl compound. With extremely active Lewis acids, such as $FeBr_{3}\;and\;GaCl_{3}$, the use of a stronger base, THF, was required to achieve living polymerization.

  • PDF

에테르화 및 에스테르화를 통한 표면사이징용 변성 전분의 제조 (Modification of Starch for Surface Sizing via Etherification and Esterification)

  • 정영빈;이학래;윤혜정;지경락;김영석
    • 펄프종이기술
    • /
    • 제46권6호
    • /
    • pp.50-55
    • /
    • 2014
  • An oxidized starch was modified for surface sizing via etherification and esterification. Propylene oxide (PO), sodium monochloroacetate (SMCA), and acrylonitrile (AN) were used as etherification, and vinyl acetate monomer (VAM), maleic anhydride (MA), fumaric acid (FA), and itaconic acid (ITA) were used for esterification. Esterification and etherification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14 to 16%. Surface sizing performance of starches in tensile strength, stiffness and compressive strength was improved by esterification and etherification of the oxidized starch. Especially, SMCA etherification was found to be the most effective modification method.

An Ultrathin Polymer Network through Polyion-Complex by Using Sodium Dioctadecyl Sulfate as Monolayer Template

  • Lee, Burm-Jong;Kim, Hee-Sang;Kim, Seong-Hoon;Son, Eun-Mi;Kim, Dong-Kyoo;Shin, Hoon-Kyu;Kwon, Young-Su
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권4호
    • /
    • pp.575-579
    • /
    • 2002
  • Two-dimensionally cross-linked ultrathin films of poly(maleic acid-alt-methyl vinyl ether) (MA-MVE) and poly(allylamine) (PAA) were produced by using sodium dioctadecyl sulfate (2C18S) as the monolayer template for Langmuir-Blodgett (LB) depositio n. The template molecules were subsequently removed by thermal treatment followed by extraction. The polyion-complexed monolayers of three components, i.e., template 2C18S, co-spread PAA, and subphase MA-MVE, were formed at the air-water interface. Their monolayer properties were studied by the surface pressure-area isotherm. The monolayers were transferred on solid substrates as Y type. The polyion-complexed LB films and the resulting network films were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The cross-linking to form a polymer network was achieved by amide or imide formation through heat treatment under a vacuum. SEM observation of the film on a porous fluorocarbon membrane filter (pore diameter 0.1 ㎛) showed covering of the pores by four layers in the polyion complex state. Extraction by chloroform followed by heat treatment produced hole defects in the film.