• Journal of Pharmaceutical Investigation
• /
• 제39권1호
• /
• pp.19-21
• /
• 2009

This study was performed to examine the possibility of increasing the level of furosemide permeation from the ethylene-vinyl acetate (EVA) matrix through the skin by incorporating various enhancers in the EVA matrix. The effects of the enhancers on the level of furosemide permeation through the skin were evaluated using Franz diffusion cells with intact excised rat skins. The enhancers examined were the fatty acids (saturated, unsaturated), the pyrrolidones, the propylene glycol derivatives, the glycerides and the non-ionic surfactants. Among the enhancers used, polyoxyethylene-2-oleyl ether (a non-ionic surfactant) showed the best enhancement. The polyoxyethylene 2-oleyl ether as a permeation enhancer could be used for development of furosemide-EVA transdermal matrix system.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.139-145
• /
• 2005

Artificial neural networks (ANNs), for a first time, were successfully developed for the modeling and prediction of solvent effects on rate constant of [2+2] cycloaddition reaction of diethyl azodicarboxylate with ethyl vinyl ether in various solvents with diverse chemical structures using quantitative structure-activity relationship. The most positive charge of hydrogen atom (q$^+$), dipole moment ($\mu$), the Hildebrand solubility parameter (${\delta}_H^2$) and total charges in molecule (q$_t$) are inputs and output of ANN is log k$_2$ . For evaluation of the predictive power of the generated ANN, the optimized network with 68 various solvents as training set was used to predict log k$_2$ of the reaction in 16 solvents in the prediction set. The results obtained using ANN was compared with the experimental values as well as with those obtained using multi-parameter linear regression (MLR) model and showed superiority of the ANN model over the regression model. Mean square error (MSE) of 0.0806 for the prediction set by MLR model should be compared with the value of 0.0275 for ANN model. These improvements are due to the fact that the reaction rate constant shows non-linear correlations with the descriptors.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.311-317
• /
• 2002

The quantitative analysis of polymer micelles consisting of amphiphilic block copolymers was carried out by small-angle neutron scattering (SANS). The block copolymers, made of poly(2-ethoxyethyl vinyl ether-b-2-hydroxyethyl vinyl ether)(poly(EOVE-b-HOVE)), exhibited a sharp morphological transition from a homogeneous solution to a micelle structure with increasing temperature. This transition is accompanied by a formation of spherical domains of poly(EOVE) with a radius around 200 $\AA$. The variations of the size and its distribution of the domains were investigated as a function of polymer concentration and temperature. The validity of SANS analysis, including the wavelength- and incident-beam-smearing effects of the SANS instrument, was examined with a pre-calibrated polystyrene latex.

• 멤브레인
• /
• 제15권3호
• /
• pp.206-212
• /
• 2005

본 연구는 에스텔화 막반응공정에 의한 2,2,2-trifluoroethyl metacrylate (TFEMA)의 생산을 위한 선행연구로, 가교된 poly(vinyl alcohol)막을 이용하여 TFEA (2,2,2-trifluoroethanol)/water과 MA (methacrylic acid)/water 혼합용액을 대상으로 투과증발특성을 연구하였다. 산 저항성을 가진 가교된 PVA막은 PVA와 EGDE를 같이 녹인 수용액을 Teflon plate 위에 캐스팅한 후 $140^{\circ}C$에서 열 가교시킴으로써 제조하였다. 제조된 막의 특성을 알아보기 위해 FT-IR과 팽윤도 측정을 실시하였다. TFEA/water 혼합용액에 대한 투과증발실험은 가교제인 EGDE농도와 운전온도를 변화시켜가면서 실시하였으며, MA/water 혼합용액에 대한 투과증발실험은 최적화된 PVA막을 가지고 실시하였다. 투과증발실험결과로부터 제조된 막은 TFEA와 MA의 에스테르화 반응온도인 $80^{\circ}C$ 이상에서 $96\%$의 TFEA 및 MA 수용액에 대해 각각 100, 900 이상의 매우 높은 물에 대한 선택도와 0.1, $0.3\;kg/m^2h$의 투과도를 얻을 수 있었다.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.1-12
• /
• 2009

This miniaccount presents the selective examples of our recent discoveries in the photopolymerization of vinyl monomers using the organic initiators such as hydrosilanes, poly(hydroarylsilane)s, benzoin silyl ethers, and thianthrene cation radical. In the photopolymerization of vinyl monomers with silanes polysilanes, while the polymerization yields and polymer molecular weights of the poly(MMA)s containing the silyl moieties decreased, the TGA residue yields and intensities of SiH stretching IR bands increased as the mole ratio of the silanes over MMA increased. The hydroarylsilane and poly(hydroarylsilane) seemed to influence strongly on the photopolymerizaiton of olefinic monomers as both chain initiation and chain transfer agents. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. Benzoin silyl ethers and thianthrene cation radical also exhibit the photoinitiating ability in the photopolymerization of MMA.

• 한국식품과학회지
• /
• 제25권6호
• /
• pp.593-595
• /
• 1993

마늘의 건조방법에 따른 향기성분의 비교를 위하여 마쇄-열풍건조, 세절-열풍건조, 세절-동결건조후 Soxhlet를 이용하여 용매 추출하였으며 이들 시료를 GC/MS로 향기성분을 비교 분석한 결과, 열풍건조법 보다는 동결건조법에서, 마쇄한것 보다는 세절하여 건조한 경우가 더 많은 마늘 향기성분의 종류가 확인되었다. 즉, 세절하여 동결건조한 시료에서는 allyl propyl disulfide, 2-vinyl-1,3-dithian 3-vinyl-〔4H〕-1,2-dithiin, 1,2-Bis(allyl)disulfane 등이, 세절하여 열풍건조한 시료에서는 methyl allyl trisulfide, 2,4-dimethylfuran 등이, 마쇄하여 열풍건조한 시료에서는 disulfide 등이 확인되었다.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.253-258
• /
• 2004

Living nature of photoinduced cationic polymerization of isobutyl vinyl ether (IBVE) in the presence of various combinations of diphenyliodonium halide (DPIX), a photocationic initiator and zinc halide $(ZnX_2)$ in methylene chloride has been investigated. Attainment of $100\%$ conversion and a linear relationship between $\%$conversion and number average molar mass of the resulting polymer, strongly suggests the living nature of this system. Livingness of the polymerization system was observed irrespective to the type of halide anion of the initiator and zinc salts unless the reaction temperature is not higher than $-30^{\circ}C$. The rate of polymerization decreases in the order of iodide > bromide > chloride when halide salt of DPIX and $ZnX_2$ are used. It is postulated that the cationic initiation is started by the insertion of weakly basic monomer in to the activated C-X terminal of the monomer adduct which is a reaction product of monomer and HX, a photolytic product of DPIX, formed in situ during the photo-irradiation process. It was concluded that polymerization is initiated by the insertion of weakly basic monomer into activated C- X terminal of monomer adduct due to the pulling action of$ZnX_2$, which successively producing a new polarized C-X terminal for the propagation in cationic nature. This led us to a conclusion that the living nature of this cationic polymerization is ascribable to the polarized C-X growing terminal, which is stable enough to depress the processes of chain transfer or termination process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.195-198
• /
• 1998

In this paper, the physical and the volume resistivity properties due to linear low density polyethylene(LLDPE)/ethylene vinyl acetate(EVA) blends are studied. In order to measure the volume resistivity properties. the micro electrometer is used, the range of temperature and applying voltage are 25 to 120[$^{\circ}C$], form 100 to 1000[V] respectively. From FT-IR spectrum, LLDPE blended with EVA shows an absence of carbonyl and ether groups. From the experimental result of the volume resistivity properties, it is confirmed that the volume resistivity is decreased, which was attributed to the increase of molecular motions with the increase of temperature.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.328-328
• /
• 2006

On mixing of 1,3-dehydroadamantane, 1, with electron-deficient vinyl monomers such as acrylonitrile and methyl acrylate in THF at r.t. in the absence of any initiator, the copolymerization spontaneously proceeded to give alternating copolymers in 28-88 % yield. By contrast, no reaction of 1 occurred, when isobutyl vinyl ether or styrene was mixed under the similar conditions. These contrastive results indicate the high electron density of a central s-bond in a strained [3.3.1]propellane derivative, 1. Alternating sequences of the resulting copolymers were characterized by NMR and MALDI-TOF-MS measurements. DSC and TGA measurements revealed the high thermal stability of the alternating copolymers containing bulky and stiff adamantane skeletons.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.851-856
• /
• 1998

2,4-Di-(2-vinyloxyethoxy)benzylidenemalononitrile (2a), methyl 2,4-di-(2-vinyloxyethoxy)benzylidenecyanoacetate (2b), 3,4-di-(2-vinyloxyethoxy)benzylidenemalononitrile (4a), and methyl 3,4-di-(2-vinyloxyethoxy)benzylidenecyanoacetate (4b), 2,5-di-(2-vinyloxyethoxy)benzylidenemalononitrile (6a), and methyl 2,5-di-(2-vinyloxyethoxy)benzylidenecyanoacetate (6b) were prepared by the condensation of 2,4-di-(2-vinyloxyethoxy)benzaldehyde (1), 3,4-di-(2-vinyloxyethoxy)benzaldehyde (3), and 2,5-di-(2-vinyloxyethoxy)benzaldehyde (5) with malononitrile or methyl cyanoacetate, respectively. Trifunctional divinyl ether monomers 2, 4 and 6 were polymerized readily by free radical initiators to give optically transparent swelling poly(vinyl ethers) 7-9. Polymers 7-9 were not soluble in common organic solvents such as acetone and DMSO due to crosslinking. Polymer 7-9 showed a thermal stability up to 300 ℃ in TGA thennograms.