• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.943-946
• /
• 2002

Liquid Crystal Spatial Light Modulators (LC-SLMs) provide many interesting applications in laser optics and opto-electronic systems, in addition to displays. Among them, three topics developed at Thales Research & Technology are reviewed: wavefront correction for laser beam control, microwave processing in radar systems and holography for TN-LCDs viewing angle compensation.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.24-29
• /
• 2002

Liquid Crystal Spatial Light Modulators (LC-SLMs) provide many interesting applications in laser optics and opto-el ectronic systems, in addition to displays. Among them, three topics developed at Thales Research & Technology are reviewed: wavefront correction for laser beam control, microwave processing in radar systems and holography for TN-LCDs viewing angle compensation.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2021

The hologram pyramid is an application of floating holograms, allowing the observer to see three-dimensional holograms from various angles without wearing wearable devices. Due to the low cost and ease of manufacturing, it has been used in a wide variety of fields as diverse as education, prototyping, showcase, and etc. But, when the observer looks at the hologram from the place where each side of the hologram pyramid is connected, the hologram looks cut and distorted. Also, the observer can see the only hologram of angles viewed head-on from each side. In this paper, we propose a method of generating a hologram image corresponding to the observer's gaze angle by tracking the observer's position and conducting reverse distortion. It provide a hologram of the angle viewed by the observer without cutting and distortion. In addition, the existing method and the proposed method were applied and compared in the hologram pyramid.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.149-152
• /
• 1992

A simple and practial equivalent technique has been presented in this study. Arbitrary number of bus system can be aggregated to the equivalent one-bus system, equivalents are totel real, and reactive bus powers and T/L losses viewing form boundary buses. Variables to be determined are line impedance between boundary buses and the equivalent bus, voltage and angle of that bus. IEEE 14 bus system is used to demonstrate the proposed method. even in contingency cases very good results have been obtained

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.159-165
• /
• 2011

This research entailed the production of stereoscopic 3D (S3D) contents using 2D-to-S3D conversion for exhibition at a museum and subjective evaluation. Hybrid production combining S3D images of existing live-action videos using the 2D-to-S3D conversion technology and computer graphic ones created via stereo rendering was conducted. Design and control of the chronological analysis of the parallactic angle was conducted on the produced contents, using binocular information as well as subjective evaluations, with the intent of conducting an investigation on the characteristics of such contents from the perspectives of the producers and viewers. An investigation was also conducted on the effects of the viewing position on the impressions of the S3D images.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.202-205
• /
• 1999

Both the physically handicapped people and the people of advanced age drive the electromotive cart of tricycle type the every day. When the public electromotive cart of tricycle type has inclined on the slant road or the bumpy road, the viewing angle of driver is changed at the same time. So the risk of traffic accident is increased. For the improvement of the above problem, the present study has made the electromotive cart installed to the new drivers seat on the basis of the 2 $\pi$ control theory.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.746-751
• /
• 2003

A method of measuring the length of defects on the wall of the spent nuclear fuel pool using the image processing and a laser slit beam is proposed. Since the defect monitoring camera is suspended by a crane and hinged to the crane hook, the camera viewing direction can not be adjusted to the orientation that is exactly perpendicular to the wall. Thus, the image taken by the camera, which is horizontally rotated along the axis of the camera supporting beam, is distorted and thus, the precise length can not be measured. In this paper, by using the LASER slit beam generator, the horizontally rotated angle of the camera is estimated. Once the angle is obtained, the distorted image can be easily reconstructed to the image normal to the wall. The estimation algorithm adopts a 3-dimensional coordinate transformation of the image plane where both the laser slit beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect taken at arbitrary rotated angle can be reconstructed to an image normal to the wall. From the result of a series of experiments, the accuracy of the defect is measured within 0.6 and 1.3 % error bound of real defect size in the air and underwater, respectively under 30 degree of the inclined angle of the laser slit beam generator. Also, the error increases as the inclined angle increases upto 60 degree. Over this angle, the defect length can not be measured since the defect image disappears. The proposed algorithm enables the accurate measurement of the defect length only by using a single camera and a laser slit beam.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.189-195
• /
• 2017

Objective: The purpose of this study was to examine the effects of real-time visual feedback weight shift training during golf swinging on golf performance. Design: Repeated-measures crossover design. Methods: Twenty-sixth amateur golfers were enrolled and randomly divided into two groups: The golf swing training with real-time feedback on weight shift (experimental group) swing training on the Wii balance board (WBB) by viewing the center of pressure (COP) trajectory on the WBB. All participants were assigned to the experimental group and the control group. The general golf swing training group (control group) performed on the ground. The golf performance was measured using a high-speed 3-dimensional camera sensor which analyses the shot distance, ball velocity, vertical launch angle, horizontal launch angle, back spin velocity and side spin velocity. The COP trajectory was assessed during 10 practice sessions and the mean was used. The golf performance measurement was repeated three times and its mean value was used. The assessment and training were performed at 24-hour intervals. Results: After training sessions, the change in shot distance, ball velocity, and horizontal launch angle pre- and post-training were significantly different when using the driver and iron clubs in the experimental group (p<0.05). The interaction time${\times}$group and time${\times}$club were not significant for all variables. Conclusions: In this study, real-time feedback training using real-time feedback on weight shifting improves golf shot distance and accuracy, which will be effective in increasing golf performance. In addition, it can be used as an index for golf player ability.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.928-931
• /
• 1996

It is necessary to develop the simulator for the test of stability and torque before the walking experiment of biped robot, because a robot may be damaged in an actual experiment. This thesis deals with the development of three-dimensional simulator for improving efficiency and safety during development and experimentation. The simulator is composed of three parts-solving dynamics, rendering pictures and communicating with the robot. In the first part, the D-H parameter and parameter of links can be loaded from the file and edited in the program. The results are obtained by using the Newton-Euler method and are stored in the file. Through the above process, the proper length of link and driving force can be found by using simulator before designing the robot. The second part is organized so that the user can easily see a specific value or a portion he wants by setting viewing parameters interactively. A robot is also shown as a shaded rendering picture in this part. In the last part, the simulator sends each desired angle of joints to the robot controller and each real angle of joints is taken from the controller and passed to the second part. The safety of the experiment is improved by driving the robot after checking whether the robot can be actuatable or not and whether the ZMP is located within the sole of the foot or not for a specific gait. The state of the robot can be easily grasped by showing the shaded rendering picture which displays the position of the ZMP, the driving force and the shape of robot.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.403-406
• /
• 2007

A New S-PVA which is named as charge-shared super PVA (CS S-PVA) LCD mode is proposed. CS SPVA controls the voltage ratio of low pixel by sharing system between low pixel and control cap, resulting in improved off-axis image quality and transmittance increase without any side effects. Moreover, the new S-PVA LCD mode is free of image-sticking. Operating schemes and display performance of CS S-PVA are presented.