• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.63-69
• /
• 1996

Recently, vibrational signal processing as a tool of machinery diagnosis has been actively studying. In this study, a new scheme for detection and diagnosis of localized defects in ball bearings, using unwrapped phase spectrum of FFT is described. The characteristic phase spectra for such defects shows linearly varying patterns due to the repetitive impact signals generated by localized defects, i.e., one linear line for single defect and various linearly changing shape according to angle between the two defect located points. The effectiveness of this method is confirmed by computer simulation and experiments on bearing with single or double defects at different locations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.227.1-227.1
• /
• 2016

플라즈마 방출광 진단법은 플라즈마에 특별한 영향을 주지 않으면서도 진단 정보를 안정적으로, 지속적으로 취득할 수 있는 우수한 진단 방법이다. 이러한 분광 진단의 신뢰성을 확보하기 위해서는 방출광의 정확한 측정과 해석이 중요하다. 방출광의 측정에 이용되는 분광 장비는 모노크로메터(monochromator)와 소형 스펙트로메터(spectrometer)가 주로 사용된다. 스펙트로메터의 경우 모노크로메터보다 분광 성능은 다소 부족하지만 가볍고 작은 크기로 인해 장비의 설치가 용이하고 가격이 저렴하다는 장점이 있다. 또한 모노크로메터에 비해 분광 성능이 낮은 대신 넓은 범위의 파장을 동시에 측정할 수 있는 장점이 있다. 따라서 스펙트로메터는 플라즈마의 모니터링에 주로 사용된다. 그런데 스펙트로메터의 기기적 선폭 증대(instrumental broadening)보다 조밀하게 위치한 스펙트럼들은 서로 중첩이 일어나 진단이 어려워진다. 특히 분자 띠 스펙트럼(molecular band spectrum)과 같은 경우 선 스펙트럼들이 매우 밀집된 형태를 이루고 있어 범용적인 스펙트로메터로 진단하기가 어렵다. 이러한 문제점을 해결하기 위하여 합성 스펙트럼 해석법(synthetic spectrum method)을 이용할 수 있다. 본 연구에서는 수소 플라즈마의 Fulcher-${\alpha}$ 띠 스펙트럼 해석에 합성 스펙트럼법을 적용하여 분자의 회전 온도가 측정 가능한지 확인하고, 고성능의 모노크로메터를 이용한 온도 측정 결과와 서로 비교하였다. 그리고 분자의 진동 상태(vibrational state)가 분자 회전 온도 측정에 미치는 영향과 이에 따른 측정의 한계 등을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.470-474
• /
• 2013

Surfaced-enhanced Raman scattering (SERS) of 4,4'-biphenyldithiol (BPDT) has been investigated at a silver island film. Ordinary Raman (OR) spectra of neat sample in solid state and in basic solution have also been taken for comparison. The spectral feature in the SERS spectrum was similar to that for the OR spectrum in basic solution, except for the broadening of ring stretching bands indicative of the presence of surface-phenyl ring $\pi$ interaction. In contrast, only absence of the C-H stretching band with very small Raman scattering cross-section seemed not pertinent in judging the definitive orientation of molecule. The observed vibrational bands in the SERS spectrum have been assigned by referring to the normal modes and wavenumbers from density functional theory (DFT) calculations of the simple model as 4,4'-biphenyldithiolates bound to two Ag atoms at the both ends. Excellent agreement between the experimental and the calculated results was achieved, which is remarkable considering the level of theory applied.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.913-916
• /
• 2009

Femtosecond vibrational spectroscopy was used to probe the dynamics of CO rebinding to hemoglobin (Hb), denatured by 4.0 M GdnHCl in $D_2O# at 283 K, after photolysis of HbCO. The stretching mode of $^{13}CO$ bound to the denatured $Hb^{13}CO$ showed a single band centered at 1922 $cm^{-1}$, indistinguishable from that of denatured $Mb^{13}CO$. Geminate rebinding of CO to the denatured Hb was accelerated more than 1000 times, suggesting that the native structure of the Hb is required to suppress efficient geminate rebinding of CO, as is the case in Mb. The geminate yield and rate for CO rebinding are almost the same in both the denatured Hb and Mb. Similarity in the equilibrium spectrum and rebinding dynamics of CO indicates that the state of the denatured Hb is very similar to that of the denatured Mb. In the denatured Hb, quaternary contact of the protein is likely severed, with the denatured protein existing as an independent subunit much like Mb.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.636-636
• /
• 2013

Since first discovery of strong Raman spectrum of molecules adsorbed on rough noble metal, surface enhanced Raman scattering (SERS) has been widely used for detection of molecules with low concentration. Surface plasmons at noble metal can enhance Raman spectrum and using Au nanostructures as substrates of SERS has advantages due to it has chemical stability and biocompatibility. However, the photoluminescence (PL) background from Au remains a problem because of obtaining molecular vibration information. Recently, graphene, two-dimensional atomic layer of carbon atoms, is also well known as PL quenchers for electronic and vibrational excitation. In this study, we observed SERS of single layer graphene on or under monolayer of Au nanoparticles (NPs). Single layer graphene is grown by chemical vapor deposition and transferred onto or under the monolayer of Au NPs by using PMMA transfer method. Monolayer of Au NPs prepared using Langmuir-Blodgett method on or under graphene surface provides closed and well-packed monolayer of Au NPs. Scanning electron microscopy (SEM) and Raman spectroscopy (WItec, 532 nm) were performed in order to confirm effects of Au NPs on enhanced Raman spectrum. Highly enhanced Raman signal of graphene by Au NPs were observed due to many hot-spots at gap of closed well-packed Au NPs. The results showed that single layer graphene provides larger SERS effects compared to multilayer graphene and the enhancement of the G band was larger than that of 2D band. Moreover, we confirm the appearance of D band in this study that is not clear in normal Raman spectrum. In our study, D band appearance is ascribed to the SERS effect resulted from defects induced graphene on Au NPs. Monolayer film of Au NPs under the graphene provided more highly enhanced graphene Raman signal compared to that on the graphene. The Au NPs-graphene SERS substrate can be possibly applied to biochemical sensing applications requiring highly sensitive and selective assays.

• 한국광물학회지
• /
• 제29권4호
• /
• pp.209-220
• /
• 2016

점토광물은 대기부터 지하수에 이르는 크리티컬존(critical zone) 영역에서 금속과 탄소 순환을 결정짓는 역할을 한다. 계산광물학 연구방법 중에 하나인 분자동역학(molecular dynamics) 시뮬레이션은 지구물질을 원자단위로 계산하기 때문에, 점토광물의 물리화학적 현상들에 대해 원자수준의 자세한 정보를 제공할 수 있다. 이번 연구에서는 clayFF 힘 장(force field)을 사용한 분자동역학 시뮬레이션을 이팔면체 점토광물인 깁사이트(gibbsite, $Al(OH)_3$), 카올리나이트(kaolinite, $Al_2Si_2O_5(OH)_4$), 파이로필라이트(pyrophyllite, $Al_2Si_4O_{10}(OH)_2$)에 적용하여 300 K, 1기압조건에서 각 광물이 가지는 격자상수와 원자간 거리를 계산하고 실험결과와 비교하였다. 더불어 수산기의 방향성 및 수소결합의 양상 그리고 파워스펙트럼(power spectrum)을 추가적으로 계산하였다. 계산 결과, 격자상수는 기존의 실험결과와 약 0.1~3.7% 미만의 오차율을 보였으며, 원자간 거리는 실험결과와 약 5% 미만의 차이를 가졌다. 깁사이트나 카올리나이트의 팔면체층 표면에 존재하는 수산기가 가지는 신축진동파수(stretching vibrational wavenumber)는 실험값 보다 약 $200-300cm^{-1}$ 높게 계산되었지만, 팔면체층 표면에 존재하는 수산기들의 상대적 크기의 경향은 기존 실험 결과와 일치하였다. 팔면체층 표면의 수산기가 (001)면과 이루는 각도도 기존 실험결과와 상당부분 일치한 반면에 내부 수산기의 경우는 다소 차이를 보였다. ClayFF를 사용한 분자동역학 시뮬레이션 연구 방법은 이팔면체 점토광물 표면 내(층간) 금속이온 흡착에 대한 수산기의 역할을 규명하는데 유용한 연구방법이 될 수 있음을 시사한다.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1323-1328
• /
• 2014

Molecular structures of the various conformational stereoisomers of 2,8,14,20-cyanophenyl pyrogallol[4]arenes 1 were optimized using the mPW1PW91 (hybrid Hartree-Fock density functional) calculation method. The total electronic and Gibbs free energies and the normal vibrational frequencies of the different structures from three major conformations (CHAIR, TABLE, and 1,2-Alternate) of the four stereoisomers [1(rccc), 1(rcct), 1(rctt), and 1(rtct)] were analyzed. The mPW1PW91/6-31G(d,p) calculations suggested that $1(rcct)_{1,2-A}$, 1(rctt)CHAIR, and $1(rtct)_{CHAIR}$ were the more stable conformations of the respective stereoisomers. Hydrogen bonding is the primary factor for the relative stabilities of the various conformational isomers, and maximizing the ${\pi}-{\pi}$ interaction between the cyanophenyl rings is the secondary factor. The calculated IR spectra of the more stable conformers [$1(rctt)_{CHAIR}$, $1(rcct)_{1,2-A}$, $1(rtct)_{CHAIR}$] were compared with the experimental IR spectrum of $1(rtct)_{CHAIR}$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.170-175
• /
• 2005

The focus of this paper is to observe the aerodynamic and vibration characteristics of the NACA0012 blade(AR=16.6) fixed on the lower surface of the wind tunnel, by changing air speed and the blade's angle of attack. After fixing a slit-typed vortex generator on the front of the blade, it could be observed that the vibrational characteristics caused by interactions between vortex and blade through the 5-hole pilot tubes. And, also, two different blades in stiffness had been prepared for observing those characteristics above in this experiment. The results were compared with the given stiffness of blade, as well. According to the results, it is clear to recognize that the vibration spectrum increases while air speed and angle of attack increase, and, also, less stiffness means bigger vibration spectrum.

• 센서학회지
• /
• 제24권3호
• /
• pp.169-174
• /
• 2015

In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB's acceleration sensor and TI's TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.61-68
• /
• 1987

The main objective of this paper is to develop the computer-aided vibrational signal processing and monitoring system of rotating machinery. This system has an automatic data acquisition capability and analyze for machine fault diagnosis. By spectrum analysis, machine’s failure can be identified. The monitoring system enables diagnosis of the fault in rotating machinery. In this study, the conventional electrical fans are selected as a model case. The date processing and fault monitoring system proposed here can be applied to the automation of the inspection process in assembling motor-shaft systems. The automatic inspection can enhance the product quality and keep it stable. Since the proposed system is developed for personal computers, it might be cheap in cost and easy in installation.