• The Journal of the Acoustical Society of Korea
• /
• v.1 no.1
• /
• pp.65-69
• /
• 1982

It is studied on the apparatus for detecting the amplitude and the frequency of the vidrating object by utilizing the Ultrasonic Doppler Effect, without having any effect on the vibratioinal cases. The output detected varing the distance between the transducers and the vibrating object, when the angles of the incidence and the reflection wave are equalized. AM demodulatioin is adapted for the detection of vibration, and the output errors are theoretically consideed. The accurate detection of vibration can be obtained, when the distance between them is 5cm to 20cm, the magnitude of amplitude is 1mm to 5mm, and the vibrational frequency range is 20Hz to 1KHz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.425-430
• /
• 2000

This paper describes the effect of the pad stiffness on the noise reduction of impact noise isolation pads of a floor. And also a new semi-experimental method for measuring the impact noise isolation capability of a pad is introduced. The impact noise isolation pads made of wire-mesh, urethane-chip and foam rubber are used for measuring the stiffness, the vibrational insulation performance and the impact noise isolation capability. The correlation between the stiffness and impact noise isolation capability of pads is theoretically reviewed, and confirmed from the experimental results. For measuring the impact noise isolation capability of only an isolation pad, a semi-experimental method proposed in this study is more effective than the reverberation room method.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.56-60
• /
• 1996

The pressure saturation effect on the phosphorescence decay rates of the $^3B_1$ State of $SO_2$ has been reinvestigated by the laser induced phosphorescence method in pure $SO_2$. We have attempted to fit the pressure dependence of the phosphorescence decay rates using the radiationless transition model by introducing different coupling constants for each vibrational level ofthe 3B1 state. The experimental decay rates can be fitted well, when the coupling constants for the (0,0,0), (0,1,0) and (0,2,0) levels of the $^3B_1$ state are $7.2\;{\times}\;10^{-4}$, $2.2\;{\times}\;10^{-3}$ and $5.9\;{\times}\;10^{-3}\;cm^{-1}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.460-463
• /
• 1990

The normal and fluorinated high-Tc superconducting materials, $YBa_2Cu_3O_{7-x}F_y$with $0.25{\leq}x{\leq}0.55\;and\;0.00{\leq}y{\leq}0.30$, were synthesized to investigate the dopping effect of fluorine atom on the superconductivity of Y123 and studied by X-ray diffraction analysis and electron probe microanalysis, resistivity and thermopower measurements, and polarized micro-Raman spectroscopy. The reproducible micro-Raman spectra were recorded and analyzed. The coherent assignments could be suggested for the spectra of normal and fluorinated samples. The fluorine atoms introduced were found to be substituted for oxygen in pyramidal Cu-O units rather than in Cu-O chains. The unit cell parameters were decreased upon the substitution of oxygen by fluorine atom. From the decreasing cell parameters and Tc, the increasing thermopower, and the possible assignments of the vibrational modes, it could be suggested that the dopping of fluorine atom localizes the superconducting electrons in Y123.

• Computers and Concrete
• /
• v.30 no.4
• /
• pp.269-276
• /
• 2022

In this paper, frequency vibrations of double-walled carbon nanotubes (CNTs) has been investigated based upon nonlocal elastic theory. The inference of small scale is being perceived by establishing nonlocal Love shell model. The wave propagation approach has been operated to frame the governing equations as eigen value system. An innovational nonlocal model to examine the scale effect on vibrational behavior of armchair, zigzag and chiral of double-walled CNTs. An appropriate selection of material properties and nonlocal parameter has been considered. The influence of dimensionless nonlocal parameter has been studied in detail. The dominance of end condition via nonlocal parameter is explained graphically. The results generated furnish the evidence regarding applicability of nonlocal shell model and also verified by earlier published literature.

• Advances in materials Research
• /
• v.11 no.1
• /
• pp.1-22
• /
• 2022

In this paper, the nonlocal integral Timoshenko beam model is employed to study the free vibration characteristics of singled walled carbon nanotubes (SWCNTs) including the thermal effect. Based on the nonlocal continuum theory, the governing equations of motion are formulated by considering thermal effect. The influences of small scale parameter, the chirality of SWCNTs, the vibrational mode number, the aspect ratio of SWCNTs and temperature changes on the thermal vibration properties of single-walled nanotubes are examined and discussed. Results indicate significant dependence of natural frequencies on the nonlocal parameter, the temperature change, the aspect ratio and the chirality of SWCNTs. This work should be useful reference for the application and the design of nanoelectronics and nanoelectromechanical devices that make use of the thermal vibration properties of SWCNTs.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.122-125
• /
• 2002

Coherent oscillations in is fluorescence dynamics of W.-t. PYP and its site-directed mutants have been observed. Two oscillatory modes coupled with the ultrafast fluorescence due to the twisting of the excited chromophore were identified, a high ftequency mode (∼135 cm$\^$-1/) with ∼550 is damping time and a low frequency overdamped mode (-45 cm$\^$-1/) with ∼250 is damping time, respectively. Both modes disappear in the fluorescence dynamics of denatured PYP emphasizing the important role of the protein nanospace as the environment for photoreaction. The qualitative picture of fluorescence dynamics in site-directed mutants was rather similar to that in W.-t. PYP, i.e., similar oscillatory modes (∼130-140 cm$\^$-1/ and ∼40-70 cm$\^$-1/) have been observed. This indicates that the vibrational modes and electron-vibration couplings do not change dramatically due to the mutation though the damping time of low frequency mode a little decreases as the protein nanospace structure becomes looser and more disordered by mutation. On the other hand, in the case of some PYP analogues, the qualitative picture of fluorescence dynamics changes, showing the familiar picture of solvation effect whereas the oscillations are almost damped. Comparative analyses of these observations are presented.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.08a
• /
• pp.29-34
• /
• 2003

In order to study the shearing characteristics of anti-vibration sheet metal which has been bonded by resin, a blanking die of 40.02mm was manufactured to blank a material and it is used to reduce vibrational noise. The variables employed in this study were 1) Clearance 2) types of stripper plate, and 3) types of the die design technique. These variables were used to study the effects on burr height, diameter of product, and camber height. Lastly, the effect of the position of the rubber during blanking was observed. In the case of burr height from experimental investigation, the push-back die, combined with a movable stripper plate, resulted in the concentration of additional pressure between the cutting edges, meaning the crack initiation was delayed. This result was not affected by lubrication, although appropriate lubrication is preferred to enable a longer lasting die in terms of wear, which results from the presence of adhesive as the sheet metal is blanked. In the comparison of diameter measurement, the push-back die, combined with the back pressure from the knock-out plate showed a favorable precision. The use of the push back die with a fixed stripper plate, with a $4.5\%$ clearance, showed better accuracy in the diameter measurement. For comparing camber height, the push back die resulted in less cambering than the drop-through die. Also, the larger the clearance, the greater was the camber height. Considering experimental results, the shearing of anti-vibrational sheet metal is best achieved when the rubber is laying on the top, blanked with a fixed-stripper plate in a push-back die, with a $4.5\%$ clearance.

• Journal of The Korean Astronomical Society
• /
• v.29 no.2
• /
• pp.223-243
• /
• 1996

We have constructed a line-by-line model of the A-X system of CO in order to analyze the CO bands appearing in the UV spectra of comets. The model includes electronic, rotational, vibrational transitions, excitations by solar UV radiation, and effects of neutral and electron collisions. The major bands of the A-X system occur in the $1200 - 1800{\AA}$ range where the temporal variation of solar irradiation is significant. The solar spectrum in this spectral range shows many emission lines, which cause a significant Swings effect. We derived fluorescence efficiencies of the bands as functions of heliocentric velocity and cometocentric distance using a high resolution spectrum of the sun. We compared our model with a spectrum of comet P/Halley obtained with the IUE, and estimated that the UV Swings effects are less than 20 fluorescence efficiencies for the most bands of the A-X system. We discuss the temporal variation of solar UV irradiation and its effects on the fluorescence efficiencies. The study of the A-X system also requites knowledge of vibrational and rotational fluorescent processes in the infrared and radio regions because the majority of CO molecules in the coma is in the ground rotational states. The solar infrared spectrum near 5 microns, where the fundamental band of CO occurs, contains strong absorption lines of the fundamental band and hot bands of CO and its isotopes. We derived fluorescence efficiencies of the infrared band as functions of heliocentric velocity and cometrocentric distance. The solar absorption lines near 5 microns cause a 20 reduction of the g-factor of the fundamental band at heliocentric velocities close to 0 km/sec. We discuss the effects of neutral and electron collisions on the fluorescence efficiencies of the infrared and UV bands.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.1-6
• /
• 1999

European spruce and maple were to be estimated as raw material of violin family instruments with linear modal analysis to provide the information data for the design of their bodies. Wood specimens cut in different direction were excited by impact hammer to measure the resonant frequency with typical vibrational modes. In spite of lower density than maple, European spruce showed the excellent acoustical properties with higher resonant frequency. And edge-grained spruce had more even frequencies than flat-grained ones to be more acceptable as front plate of violin. Resonant frequency was positively correlated with wood density of each specimen and the coefficients of edge-grained specimens were higher than those of flat-grained specimens of both wood species.