• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.449-457
• /
• 2016

Cylindrical array sensor of a surface ship to detect an enemy is normally installed in the sonar dome. Reflected signals by some structures inside the sonar dome make unwanted signals. To minimize unwanted signals, acoustic baffles are used. Acoustic baffles are hard to install and replace, so the durability of acoustic baffles is an important design parameter. To verify the durability of acoustic baffle, accelerated aging tests according to temperature and pressure were performed. Acoustic baffle specimens were made and they are tested the visual and the performance (echo reduction and transmission loss) inspection before and after aging. After the inspection, the effect of accelerated aging of the acoustic baffles were discussed.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.143-151
• /
• 2001

In the recent day, fatigue life prediction techniques play a major role in the design of components in the ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structure of the automotive vehicle. Component testing is particularly important in todey's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, Multi-axis durability testing device is used to carry out the fatigue test. In this paper, The operation software for simultaneously driving Multi-axis vibration testing device is developed and the input and output data are displayed in windows of PC controller with real time. Moteover the characteristics of the displacement and the load of Multi-axis actuators are calibrated separately.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.239-244
• /
• 2011

This study analyzes the behaviors on stress, fatigue and vibration about bulldozer in operation. Maximum equivalent stress is shown with the frequency of 100 Hz in case of the harmonic vibration analysis applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to -105MPa and the amplitude stress of 0 to $1.617{\times}105MPa$, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of bulldozer by investigating prevention and durability against its damage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.651-655
• /
• 2004

This paper studies the designing method and application for grommets, rubber material used to absorb vibration on the air conditioner compressor. The existing grommet with hardness 40 degrees, EPDM, has the high transmissibility on the compressor that causes additional structure born sound. The problem for EPDM is transformation over long time usage possibly due to its design in which stress is concentrated on a certain position. In order to resolve it, silicon material was previously used with the same design in some models. The vibration performance did improve, but the cost became high. Below are the major developments regarding improvements in compressor rubber material, vibration performance and durability through design change, and new grommet to attain cost reduction. 1 The optimum grommet design for stress even distribution through FEM methods. 2. Comparison for grommet material and design for improved transmissibility. 3. Assess for grommets durability and product applications.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.614-620
• /
• 2009

A fuel tank of a vehicle is an important part due to its flammable contents ant its importance during crash conditions. Therefore, the fuel tank's design should be assessed for durability and robustness to ensure safety during the early development phase. Previously, evaluation for the durability was done by testing in physical driving conditions which could only be done after the completion of the vehicle. Computation simulation is a more effective method to evaluate the strength and durability of the fuel tank during the early stage. In this paper, two outstanding computational simulation methods are studied. One evaluates PV cycle fatigue due to build up pressure in the fuel tank and the other evaluates the PSD vibration fatigue from modal characteristics. The results show that computational methods agree with physical tests and are thus suitable to analyze the strength and durability of the fuel tank at early development phase.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4776-4783
• /
• 2014

1차 소음원을 저감시키기 위한 많은 연구가 진행되어 왔지만 BSR과 같은 감성품질에 대한 연구는 상대적으로 적다. 본 논문은 다축 가진기를 이용한 시트 프레임의 BSR 시험을 실시한다. 정현파 스윕(sine wave sweep) 테스트를 실시하여 BSR 소음과의 관계를 연구하고 시트 프레임의 진동 내구 시험 전후 BSR 시험을 실시한다. 그 결과 첫 번째 수평(lateral)방향 공진이 고주파의 BSR소음을 발생시키며 또한 레일의 위치에 따라 BSR 소음 특성이 변하는 것을 확인했다. 또한 시트 프레임의 내구 시험 후 시스템 강성이 감소하였고, 그에 따라 BSR 소음이 감소되는 것을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.736-737
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.375-376
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.411-416
• /
• 2005

Nowadays, diesel power plant using low speed two stroke diesel engine is widely used in islands and restricted areas. Considerations were given to its benefit of high thermal efficiency, reliability and durability compared to the other prime movers. However, various types of engine vibration affect neighboring buildings to their structural vibration. For this, diesel power plant are held liable for the troubles caused by these vibration. These are mainly due to the X- and H-type engine vibrations which we excited by the X- and H- guide force moment. Authors have identified a structural vibration of new pattern called ‘T-mode vibration’ due to the torsional vibration of shafting system. In this paper, T-mode vibration is analyzed through an experimental method based on the global vibration measurement.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1495-1501
• /
• 2011

본 연구는 동력전달 장치인 추진축이 차량 주행중 상하운동에 따라 생기는 자재이음의 내구성에 대한 강도 해석을 하였다. 유니버설 조인트에서의 최대 등가 응력과 전변형량은 요크 부분에서 $1.3177{\times}10^3$Pa및 $3.6148{\times}10^{-4}$m로 크게 나타났다. 'SAE bracket', 'SAE transmission' 및 Sample history'의 불규칙 피로 하중들 중에서는 하중의 변화가 극심한 SAE bracket'의 경우가 사용 가능 수명이 15951 Cycle 정도로 가장 짧은 것을 볼 수가 있고 하중의 변화가 가장 완만한 Sample history'에서 사용가능 수명이 $2{\times}10^7$ Cycle 정도로 가장 긴 것을 알 수 있었다. 피로 하중의 빈도수로서는 SAE Bracket history'가 80% 정도로서 가장 높게 나타나 파손의 가능성이 큼을 알 수 있었고 Sample history'가 5%로서 가장 낮게 나타났다. 그리고 구속 조건을 가하여 한 Harmonic response 해석에서의 최대 변위는 58Hz에서 일어났다. 이러한 진동수에서의 최대 변위는 0.00261m가 되었다. 본 연구의 결과를 종합하여 동력전달 장치인 추진축에 응용한다면 그 파손 방지 및 내구성을 예측하는데 활용이 클 것으로 사료된다.