• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.15-21
• /
• 1995

Automatic monitoring of cutting process is one of the most important technologies for increasing the stability and the reliability of unmanned manufacturing system. In this study, the methods which use laser displacement signals and banded energy method are proposed to monitor chatter vibration in the turning process. From this method, the monitoring system of the chatter vibration was developed and investigated its practical possibility. As a result, it is shown by experiments that the chatter vibration can be detected accurately, and it can be widely used in most turning processes.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1106-1112
• /
• 2012

This paper deal with a technique for monitoring machining conditions by measuring the vibration of cutting forces at milling machining. The vibrations of cutting forces in milling process were measured and analyzed to be related with processing parameters. The magnitude of cutting force is linearly proportional to the feed rate and cutting depth, and frequency of cutting force is linearly proportional to the rotating speed. Wired and wireless communication methods were applied in transmitting the measured vibration signals and the two methods were compared. The magnitude of the vibration signals transmitted by the wireless communication method was similar to that transmitted by the wired communication method.

• 산업기술연구
• /
• 제26권A호
• /
• pp.75-80
• /
• 2006

A vibration monitoring is performed on a 1kW class stand alone wind turbine(W/T). When a W/T model is developed, general performance under various wind condition should be verified to introduce the product in the market. Especially, vibration characteristics within operating speed range are very important in the aspect of structural stability as well as generator's electrical efficiency. This paper examines the vibration performance of a home made 1kW W/T. Various data of the W/T model are acquired in real time using a remote vibration monitoring system installed in Daekwanryung test site. Vibration stability of the W/T structure is diagnosed based upon the data and the result is used to estimate the applicability of the W/T model.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.1107-1127
• /
• 2016

Studies on dynamic characteristics of the hanger vibration using field monitoring data are important for the design and evaluation of high-speed railway truss arch bridges. This paper presents an analysis of the hanger's dynamic displacement responses based on field monitoring of Dashengguan Yangtze River Bridge, which is a high-speed railway truss arch bridge with the longest span throughout the world. The three vibration parameters, i.e., dynamic displacement amplitude, dynamic load factor and vibration amplitude, are selected to investigate the hanger's vibration characteristics in each railway load case including the probability statistical characteristics and coupled vibration characteristics. The influences of carriageway and carriage number on the hanger's vibration characteristics are further investigated. The results indicate that: (1) All the eight railway load cases can be successfully identified according to the relationship of responses from strain sensors and accelerometers in the structural health monitoring system. (2) The hanger's three vibration parameters in each load case in the longitudinal and transverse directions have obvious probabilistic characteristics. However, they fall into different distribution functions. (3) There is good correlation between the hanger's longitudinal/transverse dynamic displacement and the main girder's transverse dynamic displacement in each load case, and their relationships are shown in the hysteresis curves. (4) Influences of the carriageway and carriage number on the hanger's three parameters are different in both longitudinal and transverse directions; while the influence on any of the three parameters presents an obvious statistical trend. The present paper lays a good foundation for the further analysis of train-induced hanger vibration and control.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.165-175
• /
• 2015

The application of neutron noise analysis (NNA) to the ex-core neutron detector signal for monitoring the vibration characteristics of a reactor core support barrel (CSB) was investigated. Ex-core flux data were generated by using a nonanalog Monte Carlo neutron transport method in a simulated CSB model where the implicit capture and Russian roulette technique were utilized. First and third order beam and shell modes of CSB vibration were modeled based on parallel processing simulation. A NNA module was developed to analyze the ex-core flux data based on its time variation, normalized power spectral density, normalized cross-power spectral density, coherence, and phase differences. The data were then analyzed with a fuzzy logic module to determine the vibration characteristics. The ex-core neutron signal fluctuation was directly proportional to the CSB's vibration observed at 8Hz and15Hzin the beam mode vibration, and at 8Hz in the shell mode vibration. The coherence result between flux pairs was unity at the vibration peak frequencies. A distinct pattern of phase differences was observed for each of the vibration models. The developed fuzzy logic module demonstrated successful recognition of the vibration frequencies, modes, orders, directions, and phase differences within 0.4 ms for the beam and shell mode vibrations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.880-885
• /
• 2007

Diesel engines have been widely used in ships and power plants because of its higher thermal efficiency, mobility and durability compared to other prime movers. Though these merits, diesel engine including main components are sometimes vibrated due to higher combustion pressure in cylinders. Especially torsional, axial and structural vibrations in propulsion shafting may be severely manifested by the malfunction of torsional and axial dampers and misfiring and unbalanced load in cylinder. The structural vibration of main body and turbocharger core hole are also occurred by the loosen top bracing and excess wear-out or failure of turbocharger's bearings. The marine diesel engine should be safely designed from these vibrations. This paper introduces experimental methods to develop the prototype of integrated vibration monitoring system for marine diesel engine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.243-245
• /
• 2005

Condition monitoring is desirable for increasing machinery availability, reducing consequential damage, and improving operational efficiency. In this paper, a model-based method using neural network modeling of induction noter in vibration spectra is proposed for machine fault detection and diagnosis. The short-time Fourier transform (STFT) is used to process the quasi-steady vibration signals to continuous spectra so that the neural network model can be trained with vibration spectra. And the faults are detected from changes in the expectation of vibration spectra modeling error. The effectiveness of the proposed method is demonstrated through experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.285-291
• /
• 2004

Early detection of an internal malfunction of machinery plays a very important part in all condition monitoring programs. Sensors to detect amplitude. velocity and acceleration are widely used in vibration detection and control. Piezoceramic materials are largely used in sensors and actuators for vibration monitoring and control due to their relatively large output from an induced strain and their arguable self powering characteristics. In this paper a cheap and yet reliable sensors/actuators were developed to detect vibration. The results show that low cost PZT can be designed for optimum detection of bearing vibration. This paper presents the experimental results of a number of piezoceramics characteristics in terms of resonant frequencies and variation of PZT constants with temperature.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.28-33
• /
• 2000

The monitoring of the chatter vibration is necessarily required to do automatic manufacturing system. To this study, we constructed a sensing system using tool dynamometer in order to the chatter vibration on cutting process. And a approach to a neural network using the feature of principal cutting force signals is proposed. with the error back propagation training process, the neural network memorized and classified the feature of principal cutting force signals. As a result, it is shown by neural network that the chatter vibration can be monitored effectively.

• 화약ㆍ발파
• /
• 제33권2호
• /
• pp.40-43
• /
• 2015

본 연구에서는 싱가폴 창이 국제공항 신규 터미널(5번) 확장 지반 보강공사에 적용된 진동다짐공법을 소개하고 이에 따라 발생되는 진동을 장기간 실시간으로 측정하기 위하여 최적의 진동 분석 S/W 개발을 완료하였다. 아울러 이와 유사한 파일항타 작업 진동이나, 방파제 설계를 위한 주기적 반복적으로 발생하는 파도에 의한 진동이나 초고층 건물, 터널, 교량 등 대형구조물에서 발생하는 진동을 장시간에 걸쳐 실시간으로 측정이 가능함을 알아보고자 하였다.