• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.313-315
• /
• 2001

Some authors have concluded that spiral structures and shocks do not develop if an adiabatic index $\gamma$ > 1.16 is adopted in accretion disc modelling, whilst others have claimed that they obtained well defined spirals and shocks adopting a $\gamma$ = 1.2 and a $M_2/ M_1$ = 1 stellar mass ratio. In our opinion, it should be possible to develop spiral structures for low compressibility gas accretion discs if the primary component is a black hole. We considered a primary black hole of 8M0 and a small secondary component of 0.5M$\bigodot$ to favour spiral structures formations and possible spiral shocks via gas compression due to a strong gravitational attraction. We performed two 3D SPH simulations and two 2D SPH simulations and characterized a low compressibility model and a high compressibility model for each couple of simulations. 2D models reveal spiral structures existence. Moreover, spiral shocks are also evident in high compressibility 2D model at the outer disc edge. We believe that we could develop even well defined spiral shocks considering a more massive primary component.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.546.1-546
• /
• 2003

Laser doppler flowmeter (LDF) has been applied to the measurement of pulpal blood flow (PBF) in human teeth. As far as we searched, the detection area of the pulp in the blood flow measurement has not been clarified, yet. Therefore, the purpose of this study was to obtain information of the detection area in PBF measurement using LDF. The experiments were performed on the artificial blood circulation in extracted human upper central incisors. The apical portions of examined teeth (n=6) were severed and root canals were enlarged from the apical end to the 2mm incisal to the level of enamel-cement junction. An individual resin cap of each tooth was prepared and a hole was drilled 2mm incisal to enamel-cement junction of the labial side of the cap. The measurement probe of LDF (MBF3D, Moor Instrument, UK) was plugged into the hole of the cap. Heparinized human peripheral blood, which was in advance collected and diluted 3 times with physiological saline, was pumped through the apical foramen of the teeth via a silicone tube and a disposable needle (o.d. 0.7mm) and blood flow signals were monitored. The flux signal significantly increased with the enlargement of the root canal to incisal direction (p<0.01, Friedman analysis). The result indicates that the performance of LDF in PBF with human teeth is limited.

• Journal of the Optical Society of Korea
• /
• v.17 no.4
• /
• pp.317-322
• /
• 2013

We have proposed and demonstrated a low numerical aperture technique to measure the depth of through silicon vias (TSVs) using white-light scanning interferometry. The high aspect ratio hole like TSV's was considered to be impossible to measure using conventional optical methods due to low visibility at the bottom of the hole. We assumed that the limitation of the measurement was caused by reflection attenuation in TSVs. A novel interference theory which takes the structural reflection attenuation into consideration was proposed and simulated. As a result, we figured out that the low visibility in the interference signal was caused by the unbalanced light intensity between the object and the reference mirror. Unbalanced light can be balanced using an aperture at the illumination optics. As a result of simulation and experiment, we figured out that the interference signal can be enhanced using the proposed technique. With the proposed optics, the depth of TSVs having an aspect ratio of 11.2 was measured in 5 seconds. The proposed method is expected to be an alternative method for 3-D inspection of TSVs.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.3
• /
• pp.271-275
• /
• 2019

Anodic $TiO_2$ nanotubes were simultaneously grown and doped with $RuO_2$ by single-step anodization in a negatively-charged $RuO_4{^-}$ precursor. Subsequently, a high positive voltage was imposed on the nanotubes in an $F^-$-based electrolyte (a process referred to as potential shock), which led to the formation of a through-hole $RuO_2$-doped $TiO_2$ nanotube membrane without significant loss of the $RuO_2$ catalyst. XPS results confirmed that the doped Ru metal was converted into $RuO_2$ as the potential shock voltage increased. Further increases in the potential shock voltage led to the formation of $RuO_x/Ru$ in the $TiO_2$ nanotubes. All of our results clearly showed that a through-hole catalyst-doped $TiO_2$ nanotube membrane can be produced by a sequence consisting of single-step anodization and the potential shock process.

• Journal of The Korean Astronomical Society
• /
• v.55 no.4
• /
• pp.131-138
• /
• 2022

We report the discovery of four quasars with M₁₄₅₀ ≳ -25.0 mag at z ~ 5 and supermassive black hole mass measurement for one of the quasars. They were selected as promising high-redshift quasar candidates via deep learning and Bayesian information criterion, which are expected to be effective in discriminating quasars from the late-type stars and high-redshift galaxies. The candidates were observed by the Double Spectrograph on the Palomar 200-inch Hale Telescope. They show clear Lyα breaks at about 7000-8000 Å, indicating they are quasars at 4.7 < z < 5.6. For HSC J233107-001014, we measure the mass of its supermassive black hole (SMBH) using its C _IV λ1549 emission line. The SMBH mass and Eddington ratio of the quasar are found to be ~10⁸ M_⊙ and ~0.6, respectively. This suggests that this quasar possibly harbors a fast growing SMBH near the Eddington limit despite its faintness (L_Bol < 10⁴⁶ erg s^-1). Our 100% quasar identification rate supports high efficiency of our deep learning and Bayesian information criterion selection method, which can be applied to future surveys to increase high-redshift quasar sample.

• Biomolecules & Therapeutics
• /
• v.13 no.2
• /
• pp.84-89
• /
• 2005

The purpose of this study was to characterize the putative anxiolytic-like effects of the aqueous extract of the root of Polygala tenuifolia ( AEPT) using an elevated plus maze (EPM) and hole-board apparatus in mice. The AFPT was orally administered at 50, 100, 200 or 400 mg/kg to ICR mice, 1 h before the behavioral evaluation in the EPM respectively. Control mice were treated with an equal volume of saline, and positive control mice with buspirone (2 mg/kg). Single treatments of the AEPT significantly increased the percentage of time spent and arm entries into the open arms of the EPM vedrsus saline controls (P<0.05). Moreover, there were no changes in the locomotor activity and myorelaxant effects in any group compared with the saline controls. In the hole-board test,single treatments of the AEPT (200 and 400 mg/kg) significantly increased the number of headdips versus saline controls (P<0.05). In addition, the anxiolytic-like effects of the AEPT were blocked by WAY 100635(0.3mg/kg, I.p), a5-$HT_{1A}$ receptor antagonist not by flumazenil, a $GABA_{A}$ antagonist. These results indicate that P. tenuifolia is an effective anxiolytic agent, andsuggest that the anxiolytic-like effects of P. tenuifolia is mediated via the serotonergic nervous system.

• Natural Product Sciences
• /
• v.15 no.3
• /
• pp.115-120
• /
• 2009

Woohwangcheongsimwon (WHCSW) is a traditional oriental medicinal fomula which has been clinically used for treating strokes, palpitation, loss of consciousness and anxiety. The purpose of this study was to characterize the putative anxiolytic properties of WHCSW using an elevated plus-maze (EPM) and hole-board test. Control mice were orally treated with an equal volume of vehicle (10% Tween 80 solution), and positive control mice were treated with diazepam (1 mg/kg, i.p.). In the EPM test, WHCSW significantly increased the percentage of time-spent in the open arms (200 mg/kg, P < 0.05) and the percentage of open arm entries (200 and 400 mg/kg, P < 0.05). WHCSW also significantly increased the number of head-dips in the hole-board test (200 mg/kg, P < 0.05). In addition, the anxiolytic properties of WHCSW examined in the EPM test were inhibited by flumazenil (10 mg/kg, i.p.), a GABA$_A$ antagonist. However, no changes in spontaneous locomotor activity or myorelaxant effects were observed versus 10% Tween 80 controls. These results suggested that WHCSW is an effective anxiolytic agent, and that its anxiolytic effects are mediated via GABA$_A$ receptors.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2017

In this paper, $Si_3N_4/hBN$ ceramics with various hexagonal boron nitride (hBN) contents (0, 10, 20, or 30 wt%) were fabricated via spark plasma sintering (SPS) at $1500^{\circ}C$, 50MPa, and 10m holding time. The material properties such as the relative density, hardness, and fracture toughness were systematically evaluated according to the hBN content in the $Si_3N_4/hBN$ ceramics. The results show that relative density, hardness, and fracture toughness continuously decreased as the hBN content increased. In addition, peak-step drilling (with tool diameter $500{\mu}m$) was performed to observe the effects of hBN content in micro-hole shape and cutting force. A machined hole diameter of $510{\mu}m$ (entrance) and stable cutting force were obtained at 30 wt% hBN content. Consequently, $Si_3N_4/30wt%$ hBN ceramic is a feasible material upon which to apply semi-conductor components, and this study is very meaningful for determining correlations between material properties and machining performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.576-578
• /
• 2016

Various smart home IoT devices and services while the Internet of things is the development has been provided. The core of the smart home IoT service is that user control the device via the Internet communication. Communication of IoT devices, because most with an IP address within the private network, there is a difficulty in the remote control to control access from outside the network. Any of the methods for remote control, to determine the IP address of each other, there is a UDP hole punching for communication. To ensure the data communication success rate closed to 100%, the UDP hole punching must undergo a process of three stages in some cases. In this paper, to provide a system for managing the remote control policy based on the CEP in order to omit the unnecessary steps on the remote control of IoT devices using UDP hole punching.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.939-946
• /
• 2018

In this work, we present simple schematics for a three-terminal graphene-based nanoelectromechanical switch with the vertical electrode, and we investigated their operational dynamics via classical molecular dynamics simulations. The main structure is both the vertical pin electrode grown in the center of the square hole and the graphene covering on the hole. The potential difference between the bottom gate of the hole and the graphene of the top cover is applied to deflect the graphene. By performing classical molecular dynamic simulations, we investigate the nanoelectromechanical properties of a three-terminal graphene-based nanoelectromechanical switch with vertical pin electrode, which can be switched by the externally applied force. The elastostatic energy of the deflected graphene is also very important factor to analyze the three-terminal graphene-based nanoelectromechanical switch. This simulation work explicitly demonstrated that such devices are applicable to nanoscale sensors and quantum computing, as well as ultra-fast-response switching devices.