• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.249-256
• /
• 2016

The International Association of Marine Aids to Navigation and Lighthouse Authorities(IALA) model course recommends specific aspects of basic curriculums for Vessel Traffic Services(VTS) operator education such as modules, course hours, contents, etc. Most domestic training programs for newly appointed VTS operators comply with such recommendations. The objective of this study is to determine whether such modules for VTS operator training recommended by the current IALA model course correspond to the actual opinions of VTS operators who are currently working in the field. To this end, the relative importance of basic modules for vessel traffic services operator training was analyzed using the Analytic Hierarchy Process(AHP) method. A questionnaire was designed to include 8 modules recommended by the IALA model course, and the survey results of 52 individuals working at 5 VTS centers were analyzed. The result showed that, unlike the assumption by the IALA, domestic VTS operators viewed Nautical Knowledge as the most important modules, followed by Emergency Situations, Traffic Management, Language, Equipment, VHF Radio, Communication Co-ordination, and Personal Attributes, in that order.

• Ocean Systems Engineering
• /
• 제9권2호
• /
• pp.157-177
• /
• 2019

Studies on motion response of a vessel is of great interest to researchers, since a long time. But intensive researches on stability of vessel during motion under dynamic conditions are few. A numerical model of vessel is developed and responses are analyzed in head, beam and quartering sea conditions. Variation of response amplitude operator (RAO) of vessel based on Strip Theory for different wave heights is plotted. Validation of results was done experimentally and numerical results was considered to obtain effect of damping on vessel stability. A scale model ratio of 1:125 was used which is suitable for dimensions of wave flume at National Institute of Technology Calicut. Stability chart are developed based on Mathieu's equation of stability. Ince-Strutt chart developed can help to capture variations of stability with damping.

• 한국항해항만학회지
• /
• 제34권9호
• /
• pp.693-698
• /
• 2010

In port and its approach channel, traffic accidents such as collision, aground, minor collision have reached about 77% of total marine casualty in the area. In this paper, an attempt to enhance the safe navigation was proposed by offering marine traffic supporting system which helps VTS operator assist vessel effectively with the quantitative assessment on difficulty of each vessel. The system collects navigation data from onboard AIS, assesses the data in assessment mode to analyze the navigation difficulties of each vessel and displays the degree of danger of each vessel on the ECDIS in real-time to decide the intervention time or order of priority for VTS operator. The effectiveness of the system was verified by the VTS operators in Korea.

• 한국항해항만학회지
• /
• 제37권4호
• /
• pp.337-343
• /
• 2013

정박중인 선박의 안전을 위하여 항해사, 선장 및 해상교통관제사는 항상 선박이 주묘되고 있는가를 확인하여야 한다. 정박선의 주묘판별을 위하여 VTS 관제사가 선회권과 그 중심을 인지하는 것이 중요하다. VTS에서 정박선 주묘여부 감시는 레이더 및 AIS를 이용할 수 있다. 또한 이용가능하다면, CCTV 영상이나 육안에 의한 관측도 이루어 질 수 있다. 그러나 VTS 시스템은 AIS 및 ARPA Radar로부터 수집된 데이터만으로 정박선을 모니터링하고 있으므로 정박지내에서 정박선의 선회중심을 알기가 어렵다. 본 연구에서는 VTS에서 AIS에 의해 수집된 정박 선박의 선수방위각과 위치데이터를 활용하여 선회중심을 추정하는 알고리즘을 제시하고자 한다. 알고리즘의 유효성을 확인하기 위해, 실 환경에서 정박한 선박에 대한 실험연구를 수행하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.315-323
• /
• 2013

Vessel Traffic Service (VTS) is being used at ports and in coastal areas of the world for preventing accidents and improving efficiency of the vessels at sea on the basis of "IMO RESOLUTION A.857 (20) on Guidelines for Vessel Traffic Services". Currently, VTS plays an important role in the prevention of maritime accidents, as ships are required to participate in the system. Ships are diversified and traffic situations in ports and coastal areas have become more complicated than before. The role of VTS operator (VTSO) has been enlarged because of these reasons, and VTSO is required to be clearly aware of maritime situations and take decisions in emergency situations. In this paper, we propose a prediction table to improve the work of VTSO through the Cognitive Work Analysis (CWA), which analyzes the VTS work very systematically. The required data were collected through interviews and observations of 14 VTSOs. The prediction tool supports decision-making in terms of a proactive measure for the prevention of maritime accidents.

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.336-345
• /
• 2020

선박교통관제는 선박의 안전 및 사고 예방을 위한 제도이다. 국제해사기구, 국제항로표지협회는 일찍부터 선박교통관제와 관련된 규정을 제정해 오고 있었다. 우리나라는 2019년 12월 03일에 선박교통관제에 관하여 「선박교통관제에 관한 법률」이라는 단행법을 제정하였고, 2020년 6월 4일부터 시행될 예정이다. 본 논문에서는 「선박교통관제에 법률」의 제정배경을 살펴보고, 해당 법률 조항들을 비판적으로 검토하였다. 특히 선박관제사의 면책규정이 삭제된 연유를 집중적으로 검토하여 타당성 측면에서 동 법률의 개선방향을 제시하였다. 선박교통관제에 관한 단행법이 없는 대부분의 국가에서 우리나라의 법률을 참고할 수도 있다. 그러므로 「선박교통관제에 관한 법률」의 구성과 정의 부분 등에 대한 보완이 필요하다. 더불어 최초 법안 발의 시에 포함되었다가 입법과정에서 삭제된 선박관제사의 면책규정은 향후 법률 개정에서 재 반영되어야 한다.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.136-143
• /
• 2013

The analysis of the written verdicts in recent five years was conducted to obtain preventive measures of collision between fishing vessel and non fishing vessel. As a result, a collision much happened in offshore trap for fishing vessel and below 5,000 tons of small and medium class for non fishing vessel. A person involved in a marine accident occupied 68% in sixth class deck officer and small boat operator for fishing vessel and 29% in third class deck officer for non fishing vessel. 90% of the collision happened in a underway by operating state and 84% in sight of one another by visibility state. The systemic radar training was required since 47% of the collisions was occurred on the condition of radar operation in fishing vessel. The main cause of poor lookout was a intensive fishing and poor lookout on movement by radar for fishing vessel and one man watch system and no recognition of one another by radar for non fishing vessel. This result is expected to contribute for the decrease of collision.

• 한국항해항만학회지
• /
• 제41권3호
• /
• pp.93-102
• /
• 2017

일반적으로 VTSO(Vessel Traffic Service Operator)는 양 선박의 충돌위험 정도를 판단할 때, 선박들의 침로와 속력, DCPA(Distance to CPA)와 TCPA(Time to CPA) 그리고 양 선박의 조우 상황 등을 종합적으로 고려한다. 이에 본 연구에서는 VTS(Vessel Traffic Service) 관점에서의 선박충돌위험을 예측하는 방법으로 위험지수(Risk Index, RI)를 선박 조우 상황에 따른 위험, 선박 간 근접거리에 따른 위험 그리고 접근시간에 따른 위험으로 나누어 구하고, VTSO의 위험 태도를 반영한 충돌 위험도를 제안하였다. 위험지표의 각 계수와 위험 태도는 VTSO 설문을 실시하여 구하였고, 제안한 위험도의 타당성 검증을 위하여 부산항의 실제 사고 사례에 ES(Environmental Stress) 모델의 교통 환경 스트레스치($ES_S$)을 함께 적용하여 유효성을 확인하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.263-264
• /
• 2018

해상교통관제는 관제사의 업무 특성과 작업 환경에 따라 제공되는 서비스의 질이 달라질 수 있다. 본 논문에서는 해상교통관제사의 근무 여건을 분석하여 추후 대한민국 해상교통관제 작업 환경 개선과 이를 통한 양질의 서비스 제공을 실현할 수 있는 방안을 제시하고자 하였다. 전국 20개소의 해상교통관제 센터에서 근무하고 있는 관제사를 대상으로 근무 여건 문제점 및 개선방안에 대한 인식을 설문하였다. 해상교통관제사의 작업 환경과 작업 스트레스, 이직의도 등을 분석하여 향후 해상교통관제 센터의 작업 환경과 조직 개선을 위한 기초 자료로 사용할 수 있을 것으로 기대한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.320-323
• /
• 2002

This paper presents a new generation of system for pressure vessel and shipbuilding. Typical pressure vessel and ship building weld joint preparations are either traditional V, butt, fillet grooves or have narrow or semi narrow gap profiles. The fillet and U groove are prevalently used in heavy industries and shipbuilding to melt and join the parts. Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be many hours. Although SAW and FCAW are normally a mechanized process, pressure vessel and ship structures welding up to now have usually been controlled by a full time operator. The operator has typically been responsible for positioning each individual weld run, for setting weld process parameters, for maintaining flux and wire levels, for removing slag and so on. The aim of the system is to develop a high speed welding system with multitorch for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. To achieve this, a laser vision sensor, a rotating torch and an image processing algorithm have been made. Also, the multitorch welding system can be applicable for the fine grained steel because of the high welding speed and lower heat input compare to a conventional welding process.