• Journal of Advanced Research in Ocean Engineering
• /
• 제1권2호
• /
• pp.94-105
• /
• 2015

In this study, a thruster allocation method of a deep-sea working vessel was proposed with the aims of producing the demanded generalized forces and moment for dynamic positioning while at the same time minimizing total power. For this, an optimization problem for thrust allocation was mathematically formulated with design variables, objective function, and constraints. The genetic algorithms (GA) was used to solve the formulated problem. The proposed method was applied to an example of finding optimal thrust allocation of the deep-sea working vessel having 5 thrusters. The result showed that the method could be used to determine better strategy for thruster allocation of the vessel as compared to existing study.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.461-477
• /
• 2022

Dynamic Positioning (DP) is a system that uses computer-controlled thrusters, propellers, and other propulsion devices to automatically maintain a vessel's position and heading. In this study, a wind turbine installation vessel with DP capabilities was proposed for use in mild environmental conditions in the Yellow Sea. The thruster arrangements of the vessel were analyzed in relation to wind and current loads, and it was found that a four-corner arrangement of thrusters provided the best position-keeping performance. The vessel's DP control performance was also analyzed in relation to the increased environmental load caused by the presence of a wind turbine, using a capability plot. The vessel's performance was evaluated in three different states: floating with no load, during the loading of a wind turbine and suction buckets, and after the wind turbine has been installed. The use of 750 kW and 1,000 kW thrusters was also considered, and the environmental loads in the Saemangeum coastal area and the environmental load when a 5-Megawatt wind turbine is on board were assessed. The study concluded that at least four thrusters should be used for DP to safely manage the installation process of wind turbines.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.129-137
• /
• 2016

본 연구의 목적은 가까운 미래의 선박운동정보를 이용하는 피드포워드 제어알고리즘과 FPSO 운동 수치 시뮬레이션 모델을 개발하고 시뮬레이션을 통하여 제어알고리즘의 성능을 검증하는 것이다. 본 논문에서는 조류, 바람, 파력 등의 환경하중에 의하여 발생한 선체운동의 미래 예측치를 활용한 피드포워드 제어력을 추가적으로 가지는 Dynamic Positioning System에 대하여 연구한다. 먼저, 조류력, 풍력 및 파력에 대한 수학모델을 선정하여 환경하중에서의 선체운동을 계산하고, 현재의 선체운동 값과 Brown 지수평활 예측모형을 활용하여 미래 선체운동 값을 예측하였다. 또한 위치 유지와 Heading angle 제어를 위한 제어력을 PID(Proportional-Integral-Derivative)이론을 이용하여 결정한 피드백 제어기와 미래 선체운동 값을 이용하여 결정한 피드포워드 제어기로 구성하였다. 그리고 각 Thruster에 요구되는 추력은 라그랑지승수법을 활용하여 분배하였다. 마지막으로 FPSO(Floating Production Storage and Offloading)의 운동과 Dynamic Positioning System에 대한 시뮬레이션 모델을 구축하여 선박의 위치 및 Heading angle 제어에 관한 시뮬레이션을 수행하여 제안하는 피드백 제어기와 피드포워드 제어기를 동시에 가지는 제어시스템의 성능을 평가하였다. 본 연구의 결과, 피드백 및 피드 포워드 제어기가 적용된 DPS 제어시스템이 기존의 피드백 제어기보다 위치유지 및 헤딩각 유지 능력에서 개선되었고 각 Thruster에 요구되는 평균 제어력 및 최대 제어력의 크기도 감소함을 보였다. 이에 따라 DPS에 요구되는 동력 감축과 Azimuth Thruster 용량의 감소로 인하여 비용 절감의 효과를 기대할 수 있다.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.94-99
• /
• 2013

This paper presents some experimental results about Position Mooring (PM) system applied to the barge ship. In PM operation, the station keeping in surge, sway of vessel is provided by the mooring system. In this paper, a system, consisting of a barge vessel and mooring lines, is mathematically modeled. The position and orientation of vessel is controlled by changing the tensions in the mooring lines. The PID control strategy is applied to evaluate the efficiency of proposed system. Experimental result which corresponds to the applied control strategy is presented and discussed.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.66-74
• /
• 2012

In this paper, the authors propose a new approach to control a barge type surface vessel. It is based on the Dynamic Positioning System(DPS) design. The main role of barge ship is to carry and supply the materials to the floating units and other places. To carry out this job, it should be positioned in the specified area. However sometimes the thrust systems are installed on it, and in general the rope control by mooring winch system is used. It may be difficult to compare the control performances of two types. If we consider this problem in point of usefulness, we can easily find out that the winch control system is more useful and applicable to the real field than the thrust control system except a special use. Therefore, in this paper we consider a DPS design problem which can be extended to the many application fields. The goal of this paper is twofold. First, the sliding mode controller (SMC) for positioning the our vessel is proposed. Especially, in this paper, a robust stability condition is given based on descriptor system representation. In the result, the sliding mode control law guarantees to keep the vessel in the defined area in the presence of environmental disturbances. And second, the thrust allocation problem is solved by using redistributed pseudo-inverse (RPI) algorithm to determine the thrust force and direction of each individual actuator. The proposed approach has been simulated with a supply vessel model and found work well.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.83-92
• /
• 2013

A novel methodology to evaluate remote dismantling equipment for a reactor pressure vessel (RPV) in a decommissioning project is presented in this paper. The remote dismantling equipment, mainly composed of cutting tools and positioning equipment, is absolutely required to cut and handle highly radioactive and large components in nuclear power plants (NPPs); this equipment has a great effect on the overall success of the decommissioning project. Conventional evaluation methods have only focused on cutting technologies or positioning equipment, although remote dismantling equipment cannot achieve its goal without organic interaction between the cutting tools and the positioning equipment. In this paper, the cutting tools and the positioning equipment are evaluated by performance parameters according to their original characteristics, the relationship between the two systems, and common factors. Finally, the remote dismantling equipment used in recent decommissioning projects has been evaluated based on the proposed methodology. The results of this paper are expected to be useful for future decommissioning projects.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.98-118
• /
• 2014

An auto weather-vaning system for a Dynamic Positioning (DP) vessel is proposed. When a DP vessel is operating, its position keeping is hindered by ocean environmental disturbances which include the ocean current, wave and wind. Generally, most ocean vessels have a longitudinal length that is larger than the transverse width. The largest load acts on the DP vessel by ocean disturbances, when the disturbances are incoming in the transverse direction. Weather-vaning is the concept of making the heading angle of the DP vessel head toward (or sway from) the disturbance direction. This enables the DP vessel to not only perform marine operations stably and safely, but also to maintain its position with minimum control forces (surge & sway components). To implement auto weather-vaning, a nonlinear controller and a disturbance observer are used. The disturbance observer transforms a real plant to the nominal model without disturbance to enhance the control performance. And the nonlinear controller deals with the kinematic nonlinearity. The auto weather-vaning system is completed by adding a weather-vaning algorithm to disturbance based controller. Numerical simulations of a semi-submersible type vessel were performed for the validation. The results show that the proposed method enables a DP vessel to maintain its position with minimum control force.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.15-19
• /
• 2006

GPS has been increasingly exploited to provide positioning and navigation solutions for a variety of applications. In vessel berthing application, however, there are stringent requirements in terms of positioning accuracy, availability and integrity that cannot be satisfied by GPS alone. This is because the performance of satellite-based positioning and navigation systems are heavily dependent on both the number and the geometric distribution of satellite tracked by receivers. Due to the limited number of GPS satellites, a sufficient number of ‘visible’ satellites cannot be sometimes guaranteed. This paper discusses some issues associated with the implementation of ground-based pseudolite augmentation for vessel berthing. Pseudolite means small transmitter that transmits GPS-like signals in local area. Actually, pseudolite can play three different roles in GPS augmentation scheme, depending on the operational conditions. Firstly, in the case of kinematic GPS operation where there are no signal blockages, and more than five satellites are available, additional pseudolites strengthen the GPS satellite-pseudolite geometry, and more accurate and reliable positioning solution can be achieved. Secondly, in the case when there are adverse GPS operational environments in which the number of tracked satellites is less than four, pseudolites can complement the GPS signals. In the third case, GPS signals are completely unavailable, such as when operated indoor. In such cases the pseudolites can replace the satellite constellation. However, the first role will be considered in this paper, since more than four satellite signals can usually be tracked in most marine applications. This paper presents that the pseudolite-augmented precise positioning system can provides continuous centimeter-level positioning accuracy through comparison analysis of RDOP simulation result of the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.87-92
• /
• 2001

This technical note is intended to introduce a state-of-the-art offshore construction vessel. This unique vessel is for multi-purpose Field Development Ship (FDS) for deepwater to ultra-deepwater. The FDS is a construction vessel with dynamic positioning (DP) system intended to develop offshore oil and gas field in water depth up to 3000 m. The design criteria and main capacities of the vessel are discussed.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.37-45
• /
• 1988

A dynamically positioned vessel must be capable of maintaining a specified position and direction by controlling the thruster devices. The motions of a vessel are often assuned to tne sum of low frequency(LF)motions and high frequency(HF)motions. The former is mainly due to wind, current and second order wave forces, while the latter is mainly due to first order wave forces. In order to avoid the high frequency thruser modulation, the control system must include filters to estimate the low frequency motions from the measured motion signals, This paper presents a control system based on Kalman filtering technique and optimal control tyeory. Using the combined kalmam filter, LF motion estimates and HF ones are achieved from the motion measurement of the vessel. The estimated low frequency motions are used as inputs to the dynamic positioning system. The thruster modulation is minimized using the optimal control theory; Linear Quadratic Gaussian(LQG)controller. The performances of the Kalman filter and the dynamic positioned vessel are investigated by computer simulation.