• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.475-481
• /
• 2019

A splint is one of assisting devices for the disabled with hemiplegia or contracture and is manually made by an experienced expert. Heated thermoplastic materials are continuously fitted to the affected part. This traditional method has a possible risk of low-temperature burn, quality variance of the splint due to the proficiency of maker. etc. While various approaches has been made using 3D printing technology in order to redeem those disadvantages, they still carry high cost issues with 3D scanners or accuracy issues with manual measurement. This research begins with symmetrical characteristics of human body and focuses on the preliminary study for the possibility of splint manufacturing with 3D printing technology based on geometric characteristics of unaffected arm. 3D right and left forearm models of healthy male adults were created by photogrammetry software and a series of digital images in order to measure the circumference and cross-sectional area of the forearm models at every 20mm from the elbow. The circumference and cross-sectional area showed tolerable levels of differences between both sides within subjects; The circumference and cross-sectional area showed very strong correlations between both sides within subjects. From these findings, the possibility of splint manufacturing with 3D printing technology could be confirmed based on the geometric characteristics of unaffected side.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.272-278
• /
• 2019

The silkworm performs sexual reproduction for the production of its healthy offsprings from generations to generations. Parthenogenesis in the silkworm, Bombyx mori acquires immense use in the development of outstanding homozygouse lines with higher viability, hybrid vigour, combining ability and less phenotypic variability, and it can serve as a powerful tool in controlling sex of the offsprings as well as a useful tool in selection of breeding schemes. However, naturally occuring parthenogenesis in silkworm could not be found so far. Fortunately, artificial induction of parthenogenesis is possible in silkworm. So, it is very important to find out novel methods for induction of parthenogenesis. We investigated to attempt to get a novel parthenogenetic method. Accordingly, parthenogenetic studies on between unfertilized in vivo ovarian eggs of live silkworm moth(novel) and unfertilized in vitro ovarian eggs(conventional) taken out from live silkworm moth were investigated by hot water ($46^{\circ}C$), hot air ($46^{\circ}C$) and low temperature ($0^{\circ}C$ and $-20^{\circ}C$) treatments. The best ratio of parthenogenetic eggs was obtained with in vivo ovarian eggs of live silkworm moth rather than with in vitro ovarian eggs taken out from live silkworm moth in all the treatments. The optimum exposure time absolutely depended upon the temperatures of treatments and the forms of in vivo or in vitro ovarian eggs. From these results, we expect that in vivo artificial parthenogenetic treatments on live silkworm moth will be useful for the higher induction of parthenogenesis in the silkworm, B. mori.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.86-106
• /
• 2019

We investigated the environmental conditions of natural habitats of T. nuda. The species was found on rocky northern hills ($60{\sim}90^{\circ}$) near the stream where the sea level ranges 95~145m. The average annual temperature of the habitats was lower than other places of South Korea. The differences of the lowest and the highest of the year was significantly huge than any other places. Plants were growing at the edge of stream that water reached but not submerged. Most of plants were found in North, Northeast or Northwest. It is suggested that these species require moist and low sunlight for growth. The common vegetation along with the T. nuda includes Mukdenia rossii, Selaginella rossii, Calamagrostis epigeios, and Rhododendron yedoense f. poukhanense. The dominance values and sociability of T. nuda were below 3 in all studied habitats and the variance of the number of individuals among the habitats was very high. As the optimum habitats for the T. nuda are decreasing due to the extreme precipitation patterns. It is also expected that the number of T. nuda will be decreased in the future. Therefore restoration activity in situ or ex situ must be conducted to conserve this valuable plant species.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.225-236
• /
• 2022

Urbanization due to population growth and regional development can cause various environmental problems, such as the urban heat island phenomenon. A planned city is considered an appropriate study site to analyze changes in urban climate caused by rapid urbanization in a short-term period. In this study, changes in land cover and surface heat island phenomenon were analyzed according to the development plan in Sejong City from 2013 to 2020 using Landsat-8 Operational Land Imager/Thermal Infrared Sensor (OLI/TIRS) satellite imagery. The surface temperature was calculated in consideration of the thermal infrared band value provided by the satellite image and the emissivity, and based on this the surface heat island effect intensity and Urban Thermal Field Variance Index (UTFVI) change analysis were performed. The level-2 land cover map provided by the Ministry of Environment was used to confirm the change in land cover as the development progressed and the difference in the surface heat island intensity by each land cover. As a result of the analysis, it was confirmed that the urbanized area increased by 15% and the vegetation decreased by more than 28%. Expansion and intensification of the heat island phenomenon due to urban development were observed, and it was confirmed that the ecological level of the area where the heat island phenomenon occurred was very low. Therefore, It can suggest the need for a policy to improve the residential environment according to the quantitative change of the thermal environment due to rapid urbanization.

• Korean Journal of Ichthyology
• /
• v.33 no.4
• /
• pp.278-286
• /
• 2021

The habitat characteristics and feeding ecology of the Siberian stone loach Barbatula toni were investigated in Bukcheon (Stream), Eocheonri, Ganseong-eup, Goseong-gun, and Gangwon-do, Korea from January to December 2013. B. toni lived in rapids or slow rapids from the upper stream to downstream, with the largest number of inhabitants in the middle-downstream regions. As a result of analyzing habitat preferences by age, 0+ and 1+ to ≥3+ showed differences. Ages of 0+(juveniles) lived mainly in rapidly flowing water (37.6±26.79 cm/sec) and low water depths (13.3±9.47 cm) in the pebble bottoms (substratum particle size 9.5±6.66 cm), but ages 1+ to ≥3+ lived mainly in relatively slowly flowing water (13.3±17.33 cm/sec) and relatively deep depths (25.9±10.31 cm) in stone and large stone bottoms (substratum particle size 18.0±7.63 cm). B. toni was mainly eaten from March to December when the temperature was above 5℃, and the amount of food eaten peaked in June and October. Their main food sources analyzed by the index of relative importance (IRI) included Diptera (57.0%), Ephemeroptera (29.3%), and Trichoptera (13.5%). The juveniles (age 0+) fed on small-sized prey such as Diptera and Trichoptera whales, but as they grew, they mainly ate large-sized Ephemeroptera. These feeding habits and changes in food according to the growth of B. toni were very similar to those of sibling species, B. nuda.

• Advances in nano research
• /
• v.16 no.2
• /
• pp.127-140
• /
• 2024

Upon direct/indirect exposure to flame or heat, composite structures may burn or thermally buckle. This issue becomes more important in the natural fiber-based composite structures with higher flammability and lower mechanical properties. The main goal of the present study was to obtain an optimal eco-friendly composite system with low flammability and high thermal buckling resistance. The studied composite consisted of polypropylene (PP) and short abaca fiber (AF) with eggshell powder (ESP) and halloysite clay nanotubes (HNTs) additives. An optimal base composite, consisting of 30 wt.% AF and 70 wt.% PP, abbreviated as OAP, was initially introduced based on burning rate (BR) and the Young's modulus determined by horizontal burning test (HBT) and tensile test, respectively. The effects of adding ESP to the base composite were then investigated with the same experimental tests. The results indicated that though the BR significantly decreased with the increase of ESP content up to 6 wt.%, it had a very destructive influence on the stiffness of the composite. To compensate for the damaging effect of ESP, small amount of HNT was used. The performance of OAP composite with 6 wt.% ESP and 3 wt.% HNT (OAPEH) was explored by conducting HBT, cone calorimeter test (CCT) and tensile test. The experimental results indicated a 9~23 % reduction in almost all flammability parameters such as heat release rate (HRR), total heat released (THR), maximum average rate of heat emission (MARHE), total smoke released (TSR), total smoke production (TSP), and mass loss (ML) during combustion. Furthermore, the combination of 6 wt.% ESP and 3 wt.% HNT reduced the stiffness of OAP to an insignificant amount by maximum 3%. Moreover, the char residue analysis revealed the distinct differences in the formation of char between AF/PP and AF/PP/ESP/HNT composites. Afterward, dilatometry test was carried out to examine the coefficient of thermal expansion (CTE) of OAP and OAPEH samples. The obtained results showed that the CTE of OAPEH composite was about 18% less than that of OAP. Finally, a theoretical model was used based on first-order shear deformation theory (FSDT) to predict the critical bucking temperatures of the OAP and OAPEH composite plates. It was shown that in the absence of mechanical load, the critical buckling temperatures of OAPEH composite plates were higher than those of OAP composites, such that the difference between the buckling temperatures increased with the increase of thickness. On the contrary, the positive effect of CTE reduction on the buckling temperature decreased by raising the axial compressive mechanical load on the composite plates which can be assigned to the reduction of stiffness after the incorporation of ESP. The results of present study generally stated that a suitable combination of AF, PP, ESP, and HNT can result in a relatively optimal and environmentally friendly composite with proper flame and thermal buckling resistance with no significant decline in the stiffness.

• Korean Journal of Plant Resources
• /
• v.37 no.2
• /
• pp.137-148
• /
• 2024

The purpose of this study is to investigate the weather, soil characteristics, and location environment of Pimpinella brachycarpa natural habitats in order to gather the essential information for the conservation of these habitats. P. brachycarpa are distributed throughout Korea and are mainly found to grow in shady and humid areas between 500 and 1,200 m above sea level. The average annual temperature in Mt. Duta was 13.1℃, and the average annual precipitation in Mt. Jungwon was 1,509 mm, which was higher than in other regions. The pH ranged from 4.42 to 4.97, indicating slight acidity. The total N content ranged from 0.18% to 0.68%, and the available P ranged from 13.43 to 531.56 mg/kg, demonstrating notable regional variations. The species diversity index (H') was highest at Mt. Ilwol, measuring 1.713. The evenness (J') ranged from 0.983 to 0.993, and the dominance (D') ranged from 0.007 to 0.017. The similarity index was very low, averaging 24.86%, and it was divided into communities of Wilson's elm (Ulmus davidiana var. japonica) and communities of Korean maple (Acer pseudo-siebodianum).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.4
• /
• pp.280-286
• /
• 2007

In order to find out the effects of the anticyclonic eddy on the distribution of nutrients and chlorophyll concentrations in the Ulleung Basin during spring and summer, we measured temperature, salinity, nutrients, and chlorophyll from the surface to 200 m water depth at five stations in July 2005 and April 2006. In spring, surface mixed layer was very deep inside the eddy, about 200 m, but it was relatively shallow outside the eddy, about $20{\sim}60$ m. Inside of the eddy, nutrients in the surface waters were sufficient by supply from the deep layer, whereas outside of the eddy, they were fairly depleted due to the stratification in the surface layer. In spring, chlorophyll concentrations were relatively low inside of the eddy due to the deeper surface mixed layer compared with the euphotic depth, and the depth-integrated chlorophyll concentrations outside of the eddy were twice as much as those inside of the eddy. In summer, nutrients in the surface waters were completely depleted at all stations due to the well stratification in the surface layer. The typical distribution pattern of subsurface chlorophyll maximum was observed at all stations, and the depth-integrated chlorophyll concentrations inside of the eddy were almost twice as much as those outside of the eddy. The anticyclonic eddy appearing in the Ulleung Basin every year significantly affects the phytoplankton biomass, with the opposing effects in spring and summer; in spring, the anticyclonic eddy suppresses phytoplankton growth, but in summer, it enhances the phytoplankton biomass.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

Previous studies on zooplankton in Asan Bay were mostly based on samples collected seasonally with three months intervals. Present study was aimed to know the temporal variation of meso-zooplankton distribution using the data collected monthly. Relationships between zooplankton abundances and environmental factors such as seawater temperatures, salinities and chlorophyll-a contents were also studied. Seawater temperature showed typical pattern of seasonal variation found in temperate waters. The fluctuations of environmental factors ranged relatively wider In the inner part of the bay than those in outer part of the bay. Salinity was very low right after the summer rainy period due to the sporadic outflow of freshwater from the adjacent artificial lakes. Sudden changes in salinity seemed to have significant impact on zooplankton assemblages. Chlorophyll-a contents were increased in general when compared with previous reports probably due to the recent human exploitations in the coastal zone, which might enhance the nutrients level . The timing and duration of spring bloom showed geographical differences. In the inner part of the bay it began earlier (February) and last longer (three months) while in the outer part of the bay it began late (April) and last just one month. Zooplankton abundance, especially most abundant taxon Acartia hongi, showed weak but significant positive correlation with chlorophyll-a contents. The difference in temporal variation found with two different sampling intervals indicated the necessity of shorter time interval samplings.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2012

The intensive observation (ProbeX-2010) with 6-hour launches of radiosonde was performed over Seoul metropolitan area (Dongducheon, Incheon Airport, and Yangpyeong) from 13 Aug. to 3 Sep. 2010. Five typical heavy rainfall patterns occurred consecutively which are squall line, stationary front, remote tropical cyclone (TC), tropical depression, and typhoon patterns. On 15 Aug. 03 KST, when squall line developed over Seoul metropolitan area, dry mid-level air was drawn over warm and moist low-level air, inducing strong convective instability. From 23 to 26 Aug and from 27 to 29 Aug. Rainfall event occurred influenced by stationary front and remote TC, respectively. During the stationary frontal rainy period, thermal instability was dominant in the beginning stage, but dynamic instability became strong in the latter stage. Especially, heavy rainfall occurred on 25 Aug. when southerly low level jet formed over the Yellow Sea. During the rainy period by the remote TC, thermal and dynamic instability sustained together. Especially, heavy rainfall event occurred on 29 Aug. when the tropical air with high equivalent potential temperature (>345 K) occupied the deep low-middle level. On 27 Aug. and 2 Sep. tropical depression and typhoon Kompasu affected Seoul metropolitan area, respectively. During these events, dynamic instability was very strong.