• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.315-327
• /
• 2002

Al-pillared clay was synthesized by constructing pillars of aluminum oxides at the interlayer of montmorillonite in bentonite. XRD, DTA and chemical analyses of Al-pillared clay were performed to examine mineralogical properties. Batch adsorption experiments were also conducted to determine the adsorption properties of this synthesized clay for phosphate ions. XRD analyses showed that the interlayer space of Al-pillared clay expanded to 18.03 $\AA$ at room temperature and shifted to $17 \AA$ after heating to $550^{\circ}C$. A small change in interlayer space after heating indicates high thermal stability. The interlayer expansion by glycerol was also very small. From DTA analyses, pillared clay showed the characteristic endothermic peaks at 270 and $420^{\circ}C$ , which might be caused by dehydration in framework of pillars between interlayers. Adsorption experiment revealed that Al-pillared clay had an excellent adsorption capacity to the phosphate ions, whereas montmorillonite had very low adsorption capacity to phosphate ions. In phosphate solution concentration up to 300 mg/L, 2 g of pillared clay could uptake almost 100% of phosphate ions from 20 mL of solution. After heat treatment of the phosphate adsorbed pillared clay at 50$0^{\circ}C$ to remove phosphate, the calcined pillared clay could adsorb phosphate ions with a little decreased adsorption efficiency. This fact indicates that Al-pillared clay can be recycled for the adsorption of phosphate ions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.579-592
• /
• 2020

This study was designed to assess the water quality and phytoplankton community including chlorophyll a in blood cockle (Tegillarca granosa) farms in May, August and November of 2017 in the northwestern Yeoja Bay, Korea. As a result, the seasonal characteristics of water types by water temperature and salinity were clear. Nutrients were abundant in silicate throughout the season, but phosphate was scarce in spring and summer, and nitrogen sources were scarce in autumn. The species composition of phytoplankton community was a very simple distribution, and the standing crop was also very low. The annual dominant species is dominated by the diatoms, with Skeletonema costatum-ls, Nitzschia longissima in spring, Pleurrosigma normanii, Coscinodiscus gigas in summer, and N. longissima, Pseudonitschia pungens, Chaetoceros curvisetus, Eucampia zodiacus in autumn. In summer the results were different from other coastal waters of Korea. The principal component analysis(PCA) and correlation analysis showed that the characteristics of water quality and biological environments differed according to the season. Furthermore, it was determined by the supply of materials through fresh water on land, seawater congestion caused by the refueling of surface sediments with lower depth, and the balance of biological production and mineralization of organic matters in blood cockle farms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.182-189
• /
• 2016

For high accuracy of forecast using numerical weather prediction models, we need to get weather observation data that are large and high dense. Korea Meteorological Administration (KMA) mantains Automatic Weather Stations (AWSs) to get weather observation data, but their installation and maintenance costs are high. Mini-AWS is a very compact automatic weather station that can measure and record temperature, humidity, and pressure. In contrast to AWS, costs of Mini-AWS's installation and maintenance are low. It also has a little space restraints for installing. So it is easier than AWS to install mini-AWS on places where we want to get weather observation data. But we cannot use the data observed from Mini-AWSs directly, because it can be affected by surrounding. In this paper, we suggest a correcting method for using pressure data observed from Mini-AWS as weather observation data. We carried out preconditioning process on pressure data from Mini-AWS. Then they were corrected by using machine learning methods with the aim of adjusting to pressure data of the AWS closest to them. Our experimental results showed that corrected pressure data are in regulation and our correcting method using SVR showed very good performance.

• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.

• Journal of Veterinary Clinics
• /
• v.11 no.2
• /
• pp.545-552
• /
• 1994

This experiment was carried out to investigate the renditions to maintain good post-thaw motility and viability of canine spermatozoa when the semen was frozen using methanol. The semen from two male dogs which had been proven to be fertile in the previous one year was treated with different compositions of semen diluent and was frozen at different freezing temperatures, When canine semen was frozen at-2$0^{\circ}C$, -6$0^{\circ}C$, or -8$0^{\circ}C$, the spermatozoa frozen and stored at -2$0^{\circ}C$ showed very low post-thaw motility and viability from day 2 to 7 and showed no viability since day 15 after freezing. The spermatozoa frozen and stored at -6$0^{\circ}C$ or -8$0^{\circ}C$ showed higher post-thaw motility and viability on day 2, 1, 15 and 30 after freezing than that frozen and stored at-2$0^{\circ}C$(p<0.01), with no difference between two groups. Among different composition groups of the semen diluents of control(tris + egg yolk + glycerol), egg yolk-free, 히ycerol-free, and tris-free, Prior to freezing, the egg yolk-free diluent showed significantly love. motility and viability than the other diluents(p<0.05). On each thawing day (from day 2 to 15 after freezing), control group showed considerably higher motility and viability than the other groups(p<0.01). The canine spermatozoa frozen and stored at -6$0^{\circ}C$ and -8$0^{\circ}C$ showed gradual decrease of motility from day 2 to 30 after freezing and the spermatozoa of these two groups thawed on day 30 showed considerably love. motility than those thawed on day 2 after freezing, respectively(p<0.01). These results indicate that the freezing temperature of either -6$0^{\circ}C$ or -8$0^{\circ}C$ can be applicable to the freezing method using methanol and also all of the components of the semen diluent including cryoprotectant, buffer and cold-shock buffer are very important to maintain motility and viability of canine spermatozoa in the freezing and thawing procedure.

• Journal of Aquaculture
• /
• v.13 no.1
• /
• pp.87-99
• /
• 2000

Field survey on the variational characteristics of water quality and chlorophyll a concentraion were carried out at the 25 stations for four seasons in Kogum-sudo(Straits) southern coast of Korean Peninsula from Feburuary to October in 1993. We made an analysis on biological factor as chlorophyll a concentraion as well as physicio-chemical factors such as water temperature salinity sigma-t transparency dissolved oxygen(DO) chemical oxygen demand(COD) nutrients (ammonia, nitrite, nitrate, phosphate, and silicate) N/P ratio and suspended solid(SS). The waters in the Kogum-sudo were not stratified due to the tidal mixing. And the high productivity in photic layer were supported by high nutrients concentration from bottom waters. The high concen-trations of suspended solid in straits had a bad influence upon marine biology of nature and cultivations. In Kogum-sudo had a sufficient nutrients for primary productivity during a year. Especially phosphate and inorganic nitrogen were high the other side silicate was very low. The source of nutrients supply depend on rather mineralization of organic matters and input of seawater from outside than input of freshwaters from lands. Phytoplankton biomass as measured by chlorphyll a concentratiion was very high all the year round and it was controlled by the combination o f several environmental factors especially of phosphate in summer and dissolved nitrogen in other seasons.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.270-277
• /
• 2008

Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.257-266
• /
• 2019

In this study, we selected 6 vegetation sites (reed community) and 6 non-vegetation sites (tidal flat) in the Muan tidal flat of Hampyeong Bay, and observed seasonal changes in carbon dioxide concentration, flux and soil temperature at low tide conditions. The study was conducted to identify the characteristics of seasonal changes in vegetation and non-vegetation areas through the data observed in May 30, August 8, 2012 and January 31, 2013. The average carbon dioxide concentration in the vegetation area was the highest in winter, followed by spring and summer, and the non-vegetation area showed the same concentration change as the vegetation area. The carbon dioxide flux in the vegetation area showed a positive (+) value in both spring and summer, but it was negative (-) in the winter. The average value of carbon dioxide flux was the highest in spring, but it was almost similar to summer, and winter was the lowest negative value. Non-vegetation areas showed positive emission in spring, and negative uptake in summer and winter; mean values were the highest in spring, and the difference between summer and winter was small. In summary of seasonal change characteristics of the research area, the emission of carbon dioxide was dominant in both areas in spring. In summer, carbon dioxide emission was dominant in the vegetation area, and the non-vegetation area was observed to uptake by photosynthesis of phytoplankton, but it was very small. In winter, changes in flux in both areas were very slight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.142-146
• /
• 1989

Anther and/or tissue culture of cross pollinated crops would be very important because it can result in the direct use of haploids or doubled haploids for developing superior hybrids or varieties. The objective of the study was to investigate the response frequencies in anther and/or tissue-cultured hybrids of corn. pearl millet and buckwheat to identify agronomically acceptable germplasm of the crops. 27 crosses of corn inbred lines were evaluated by plating their anthers on N6. MS and Yu-Pei media. Two genotypes of FR1l41/FR16 hybrid cultured on N6 medium and Fla 2BT73/S6013 hybrid cultured on N6 medium responded with one anther producing calli when plated after 5$^{\circ}C$ low temperature treatment for one week. Immature embryos of corn hybrid Suwon 19 responded producing calli that were regenerated to plants at a 8.6 percent success rate. Of the 20 corn hybrids. immature tessels of FR1l41/FR16. B68/A1l6N//KS15. KS16/KS17. GA209/DB578 and SDB126/GA209 crosses responded at a relatively higher success rate producing calli that were regenerated to plants. In tissue culture of elongating culms of pearl millet x Napier grass interspecific hybrid. 2.5-4.0mm long pieces of the culm were good for callus induction resulting in higher success rate. The epicotyl of buckwheat was very good for tissue culture. and the node produced the plants regenerated directly without callus induction on the B5 medium containing I ppm BA and 0.05 ppm IBA. There were great differences in response to anther and/or tissue culture of corn, pearl millet and buckwheat due to genotype x medium and environment interactions.