• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.166-170
• /
• 2012

Most of Cudriania tricuspidata Bureau saplings in Korea have been produced by crown division. But the production of Cudriania tricuspidata B. saplings by this method is very low in efficiency and in uniformity. Therefore, to develop Cudriania tricuspidata B. saplings production system by cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to temperature on the bed, length, thickness of the hard wood cutting and rooting agent application. Of different concentration of rooting agent, the 5,000 ppm of 1-naphthalenacetic acid(NAA) and Indole butyric acid(IBA) were found to be the highest in rooting of hardwood cuttings; other concentration were in order as follows; 2,500, 1,000 and 10,000 ppm in concentration of rooting agents. The shading ratio of polyethylene film showed the highest rooting ratio of the softwood cuttings at 55%.

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.255-263
• /
• 2021

Paederia foetida L. is an important medicinal plant that has been used for the treatment of various gastrointestinal related ailments by different tribal communities in India. This plant is also known for its use as a food. Due to overexploitation, P. foetida has been classified as a vulnerable plant in some states of India. The propagation of P. foetida by conventional methods is easy but very slow. Synthetic seed technology offers incredible potential for in vitro propagation of threatened and commercially valuable plants, and can also facilitate the storage and exchange of axenic plant material between laboratories. However, synthetic seed production for P. foetida has not yet been reported. Thus, to the best of our knowledge, the present study is the first attempt to produce synthetic seeds of P. foetida by calcium alginate encapsulation of in vitro regenerated axenic nodal segments. Sodium alginate (3%) and CaCl₂ (100 mM) were found to be the optimal materials for the preparation of ideal synthetic seeds, both in terms of morphology and germination ability. The synthetic seeds showed the best germination (formation of both shoot as well as root; 83.3%) on ½ MS medium augmented with 0.5 mg/L indole-3-acetic acid. The plantlets obtained from these synthetic seeds could be successfully acclimatized under field conditions. We also studied the storage of these synthetic seeds at low temperature and their subsequent sprouting/germination. The seeds showed a germination rate of 63.3% even after 21 days of storage at 4 ℃; thus, they could be useful for transfer and exchange of P. foetida germplasm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1417-1424
• /
• 2018

The damage caused by foot-and-mouth disease and AI has been repeated in year by year, and the actual damage is held by farmers. Currently, domestic livestock farmers' demand for foreign labor force is rapidly increasing, but the foreign management system is very inadequate, autonomous disinfection consciousness is poor and seasonally disinfest of winter is a serious situation. Thus, the exit management system, where small and medium scale farmers can purchase and install, is necessary for medium and small scaled farmer who is suffering from the pollutants and who does not have capacity to install expensive sterilization. In this paper, we propose ICT fusion combined plasma access control system which can utilize the principle of low temperature plasma lamp, to introduce disinfection system, to ensure convenience and safety that enables integrated control.

• Korean Journal of Veterinary Service
• /
• v.42 no.3
• /
• pp.127-133
• /
• 2019

The purpose of this study was to investigate the contamination level of representative mycotoxins that have adverse effects on livestock by using LC-MS/MS method and to utilize the results as basic data for the establishment of quality control system for feed, and to provide information on production and storage. A total of nine mycotoxins, including aflatoxin $B_1$, aflatoxin $B_2$, aflatoxin $G_1$, aflatoxin $G_2$, ochratoxin A, fumonisin $B_1$, fumonisin $B_2$, deoxynivalenol (DON), zearalenone (ZEN) were simultaneously analyzed in LC-MS/MS under ESI positive mode. Fumonisin $B_1$ and fumonisin $B_2$ were detected from 3 cases of 75 forage produced in Incheon area, the detection rate was 4.0%. The detection concentration was 0.01~0.02 mg/kg, which was lower than the domestic recommended limit. Fumonisins were detected in a slightly different manner from the results of mycotoxin studies reported in Korea, which is attributed to the high temperature and dry summer weather of the year. The result of LC-MS/MS method performance of 9 mycotoxins, the recovery of DON was quite low as $41.53{\pm}3.91%$ that is not suitable for simultaneous analysis. This is probably due to that the extract solution used in this study was not suitable for the extraction of DON, along with the characteristics of a very dry forage. For the study of mycotoxins in Incheon area forage for the first time, further investigation is needed for the safe supply of livestock products.

• Journal of Environmental Science International
• /
• v.29 no.12
• /
• pp.1223-1237
• /
• 2020

This study focused on comparing the meteorological conditions in the Atmospheric Boundary Layer (ABL) on high-event days and non-event days in the Seoul Metropolitan Area (SMA). We utilized observed PM10 and meteorological variables at the surface as well as at the upper heights. The results showed that high-event days were consistently associated with lower wind speed, whereas wind direction showed no particular difference between high-event and non-event days with frequent westerlies and northwesterlies for both cases. During high-event days, the temperature was much warmer than the monthly normal values with a sharp increasing trend, and Relative Humidity (RH) was higher than the monthly normal, especially on high-event days in February. During high-event days in spring, a double inversion layer was present at surface and upper heights. This indicates that stability in the multi-layer is an important indicator of higher PM10 concentrations. Net radiation in spring and winter is also closely associated with higher PM10 concentrations. Strong net radiation resulted in large sensible heat, which in turn facilitated a deeper mixing height with diluted PM10 concentrations; in contrast, PM10 concentrations were higher when sensible heat in spring and winter was very low. We also confirmed that convective and friction velocity was higher on non-event days than on high-event days, and this was especially obvious in spring and winter. This indicated that thermal turbulence was dominant in spring, whereas in winter, mechanical turbulence was dominant over the SMA.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1540-1545
• /
• 2018

SiGe alloy is widely used thermoelectric materials for high temperature thermoelectric generator applications. However, its high thermoelectric performance has been thus far realized only in alloys synthesized employing mechanical alloying techniques, which are time-consuming and employ several materials processing steps. In the current study, for the first time, we report an enhanced thermoelectric figure-of-merit (ZT) ~ 1.1 at $900^{\circ}C$ in ntype $Si_{80}Ge_{20}$ nano-alloys, synthesized using a facile and up-scalable methodology consisting of rapid solidification at high optimized cooling rate ${\sim}3.4{\times}10^7K/s$, employing melt spinning followed by spark plasma sintering of the resulting nano-crystalline melt-spun ribbons. This enhancement in ZT > 20% over its bulk counterpart, owes its origin to the nano-crystalline microstructure formed at high cooling rates, which results in crystallite size ~7 nm leading to high density of grain boundaries, which scatter heat-carrying phonons. This abundant scattering resulted in a very low thermal conductivity ${\sim}2.1Wm^{-1}K^{-1}$, which corresponds to ~50% reduction over its bulk counterpart and is amongst the lowest reported thus far in n-type SiGe alloys. The synthesized samples were characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy, based on which the enhancement in their thermoelectric performance has been discussed.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.154-162
• /
• 2010

A fundamental study of the distillation behavior of ferromanganese alloy melts was carried out at 1773 K and 0.1333 kPa (=1 Torr). During the distillation of ferromanganese alloy melts under reduced pressure, manganese vaporizes preferentially to phosphorus and other solute elements. High purity manganese metal with a very low content of solute elements can be obtained by distillation of ferromanganese alloy melts. The evaporation of manganese is suppressed as the carbon content of ferromanganese alloy melt increases due to the decrease of activity and vapor pressure of the manganese. When the carbon content of ferromanganese alloy melt is high, melt droplets are ejected from the bath, especially in the early stages of the distillation, and the solute elements in the splashed droplets contaminate the condensed material. The ejection of melt droplets is presumed to be caused by the increase of melting temperature and viscosity of the surface layer of melt due to the enrichment of solute elements such as carbon and iron.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.449-455
• /
• 2022

Concrete is the most widely used construction material. The heavy self-weight of concrete may offer an advantage when developing high compressive strength and good dimensional stability. However, it is limited in the construction of super-long bridges or very high skyscrapers owing to the substantially increased self-weight of the structure. For developing lightweight concrete, various lightweight aggregates have typically been utilized. However, due to the porous characteristics of lightweight aggregates, the strength at the composite level is generally decreased. To overcome this intrinsic limitation, this study aims to develop a construction material that satisfies both lightweight and high strength requirements. The developed cementitious composite was manufactured based on a high volume usage of hollow glass microspheres in a matrix with a low water-to-cement ratio. Regardless of the tested hollow glass microspheres from among four different types, compressive strength outcomes of more than 60 MPa and 80 MPa with a density of 1.7 g/cm³ were experimentally confirmed under ambient and high-temperature curing, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.4
• /
• pp.437-446
• /
• 2022

In this study, to obtain icaritin with high pharmacological activities from icariin, which has a content ratio of over 58% in the total flavonoids of Epimedium herb, a special Epimedium flavonoid-glycosidase was produced, purified and characterized from Aspergillus sp.y848 strain. The optimal enzyme production was gained in a medium containing 5% (w/v) wheat bran extract and 0.7% (w/v) Epimedium leaf powder as the enzyme inducer, and strain culture at 30℃ for 6-7 days. The molecular weight of the enzyme was approximately 73.2 kDa; the optimal pH and temperature were 5.0 and 40℃. The enzyme Km and Vmax values for icariin were 15.63 mM and 55.56 mM/h. Moreover, the enzyme hydrolyzed the 7-O-glucosides of icariin into icariside II, and finally hydrolyzed 3-Orhamnoside of icariside II into icaritin. The enzyme also hydrolyzed 7-O-glucosides of epimedin B to sagittatoside B, and then further hydrolyzed terminal 3-O-xyloside of sagittatoside B to icarisiede II, before finally hydrolyzing 3-O-rhamnoside of icarisiede II into icaritin. The enzyme only hydrolyzed 7-O-glucoside of epimedin A or epimedin C into sagittatoside A or sagittatoside C. It is possible to prepare icaritin from the high-content icariin in Epimedium herb using this enzyme. When 2.5% icariin was reacted at 40℃ for 18-20 h by the low-cost crude enzyme, 5.04 g icaritin with 98% purity was obtained from 10 g icariin. Also, the icaritin molar yield was 92.5%. Our results showed icaritin was successfully produced via cost-effective and relatively simple methods from icariin by crude enzyme. Our results should be very useful for the development of medicines from Epimedium herb.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.