• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.171-175
• /
• 2020

The present and future cities are expanding, and the noise and environmental pollution in cities are getting worse day by day, causing saturation of road and subway traffic. As a result, citizens are spending a great deal of time and money. The use of the sky as a measure to solve this problem has become a reality. However, airplanes that require airstrips and noisy helicopters are difficult to use in cities. As a solution, PAVs and UAMs that generate low noise and enable vertical takeoff and landing using electric energy, motor, hybrid, and hydrogen energy, are attracting attention, with its practicality being promoted in many countries. The development of urban environment and technology has led to the emergence of Personal Air Vehicle (PAV), Vertical Takeoff and Landing (eVTOL), and Urban Air Mobility (UAM) for shipping. Though currently at the level of testing, general commercialization of these air transport means is expected in the next five to fifteen years. This study suggests a plan on the application of human factors to the introduction of PAV and UAM.

• Journal of Aerospace System Engineering
• /
• v.2 no.4
• /
• pp.19-24
• /
• 2008

In this study gives detail on the composition and process of Quad-rotor blade Vehicle. It may seem simple but we have many trouble because of many subtleties. Unless designed carefully, it is very difficult to control of stability by reason of disturbances in the air and unbalance in the motor. We want to have a more stable output so add other electronics supplement, and change the battery in oder to increasing thrust. It cannot be done quickly, nor cheaply because it is more difficult than first ideas that control of Quad-rotor. But we complete manufacture of basically controllable vertical takeoff and landing aircraft.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.74-81
• /
• 2021

UAM(Urban Air Mobility) systems have evolved in the form of helicopters in the 1960~1970s, tiltrotors in the 1980s, small aircraft transportation systems in the 2000s, and electric-powered Vertical Take-Off and Landing (eVTOL) in the 2010s; accordingly, the early heliport has evolved to its current form of a Vertiport. Vertical Takeoff and Landing Sites, Vertiports, are important factors for the successful introduction of UAM, along with the resolution of air traffic control (ATC), air security, and noise problems. However, there are no domestic or international installation standards and guidelines yet. Therefore, in this study, installation standards were prepared by referring to domestic and international case studies, ICAO standards, and MIT research papers. The study proposes to establish standards for Final Approach and Takeoff Area (FATO) as 1.5D, 1D for Touchdown and Lift-Off Area (TLOF), and 1.5D for Safety Area (SA). It also proposes to add "UAM Vertiport Installation Standards" to the 「Act on the Promotion and Foundation of Drone Utilization, Drone Act」.

• Journal of the Korea Computer Graphics Society
• /
• v.19 no.1
• /
• pp.21-25
• /
• 2013

In this paper, we consider a physics-based 2D flight simulation game where users can easily control realistic flight of a vehicle equipped with two thrusters that allow vertical takeoff and vertical landing. The flight vehicle can be manipulated by directly controlling the thrusting force at each thruster using a pair of analog input devices such as joysticks. However, it might require too much practice to make aerobatic flying solely with this kind of control. We propose a set of fly-by-wire methods that provide easy-to-use, intuitive control of a VTVL vehicle. Based on PD controllers, the proposed methods allow users to specify the velocity or position of the vehicle directly. Furthermore, they are easy to understand and simple to implement. We expect that the proposed vehicle model and control mechanism could be used in various 2D games.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2015

In this study, we peformed optimal design of a composite skid landing gear, one of the solid spring shock absorbers, for light vertical takeoff and landing aircraft. Although a solid spring type has poor energy dissipation capability, it is commonly used for light aircraft where sink speeds are low and shock absorption is non-critical in terms of simplicity, low cost and weight reduction. In this paper, design parameters of solid spring such as sink speed, gear leg length, deflection and landing load factor were reviewed. In order to meet structural requirements such as deflection and strength, finally, we conducted optimal design of the composite skid landing gear for VTOL UAV using genetic algorithm and pattern search algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.131-140
• /
• 2011

The purpose of this study was to evaluate the kinematic characteristics of 5th hurdle clearance during the 100m hurdle final competition at the 2010 Colorful DaeGu pre-championship meeting. This study was also intended to provide the technical data for better performance for preparing the 2011 world championship. Lee and Jung need to change technical movement by reducing the distance of the take-off point from the hurdle and by decreasing the vertical velocity of the C.G.(center of gravity) at the takeoff. Powell's angle of the take-off leg showed bigger at the touchdown and smaller at the takeoff comparing to Lee's and Jung's. Furthermore, Powell's horizontal velocity of the C.G. was maintained at the takeoff and touchdown. So, Lee and Jung need to change angle of the take-off leg the same as Powell's. Both Lee and Jung need to increase the angle of landing leg at the touchdown. In addition to increasing the angle Jung needs to improve the knee and ankle velocity with the hurdling leg.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.330-336
• /
• 2023

Rapid urbanization is rapidly progressing around the world, and urban problems such as traffic congestion, environmental pollution, and noise pollution are emerging, due to this urban concentration phenomenon, logistics and transportation costs are increasing. Urban Air Mobility(UAM) is a three-dimensional futuristic urban transportation that is expected to become an important transportation axis of smart cities as a service(MaaS) linked to roads, railways, and personal transportation. However, as of July 2023, research on airspace systems, Bertieport design, navigation, and communication for UAM operation is actively being conducted, but little research has been conducted on the concept of pilot education and training and education and training programs. Therefore, this paper aims to present a suitable plan for the domestic pilot training system through SWOT analysis of vertical takeoff and landing(VTOL) pilot education and training programs in the United States and Europe.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.52-65
• /
• 2021

A large amount of time and cost is consumed due to congestions caused by an increasing number of cars which results in a lot of emissions. To overcome these problems, a new electric vertical takeoff and landing (eVTOL) aircraft is being considered. Since vertical take off and landing without a separate runway is realized and electricity is used as a power source, it could solve the saturated ground traffic congestions without emissions. In this paper, the initial sizing was performed based on the Nexus 6HX of Belltextron which is a tilt-ducted fan type. In this study, the electric propulsion system that only uses battery was implemented instead of current Nexus 6HX hybrid electric propulsion. Aerodynamic analyses were performed using OpenVSP and XFLR5. Power-to-weight ratio, wing loading, estimated weight were calculated with these analyses.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.226-233
• /
• 2015

Pose estimation is an important operation for many vision tasks. This paper presents a method of estimating the camera pose, using a known landmark for the purpose of autonomous vertical takeoff and landing(VTOL) unmanned aerial vehicle(UAV) landing. The proposed method uses a distinctive methodology to solve the pose estimation problem. We propose to combine extrinsic parameters from known and unknown 3-D(three-dimensional) feature points, and inertial estimation of camera 6-DOF(Degree Of Freedom) into one linear inhomogeneous equation. This allows us to use singular value decomposition(SVD) to neatly solve the given optimization problem. We present experimental results that demonstrate the ability of the proposed method to estimate camera 6DOF with the ease of implementation.