• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.79-93
• /
• 1982

The purpose of orthodontic treatment is to achieve normal occlusion and good facial esthetics for individual patients. To produce harmonized facial balance, treatment planning for patient who require orthodontic treatment should include both a hard tissue and soft tissue cephalometric analysis. Author studied to derive the normal standards of soft tissue profile in Koreans by roentgenocephalometric analysis. For this study 12 soft tissue profile landmarks were plotted and 23 linear length, 9 soft tissue thickness, 8 vertical height length, 12 angles of soft tissue profile, and 3 vertical proportion were measured. The subjects consisted of 166 males and 209 females from 7 to 19 years with normal occlusion and acceptable profiles, and were divided into five groups according to age. The obtained results were as follows; 1. From the basis of N-Pog (Nasion-Pogonion) plane, the growth of facial soft tissue in the middle region especially nose area was greater than others facial region. 2. From the basis of G-Pog' (Glabella-soft tissue Pogonion) plane, the values of linear measurement of soft tissue Nasion and Inferior labial sulcus decreased and nose tip grew forward as growing older. 3. The growth of the facial soft tissue thickness was greatest in superior labial sulcus and the thickness of soft tissue nasion gradually became thinner as growing old. 4. The thickness of upper and lower lip was 14.47mm, 14.57mm in adulr male, 12.76mm, 13.78mm in adult female. 5. The soft tissue thickness of the lower lip was thicker than that of upper lip in all age groups and both sexes, 6. The vertical length of the upper and lower lips were 25.04mm, 49.97mm in adult male and 23.50mm, 48.39mm in adult female. 7. By the significant test, there were significant difference between male and female in fifth adult group on all vertical length measurements of lower face. 8. In fifth adult group, the perpendicular distance from LS, LI to Steiner's line and Ricketts' esthetic line were as follow; Steiner line to LS, LI were 7.98mm, 5.84mm in male. Steiner line to LS, LI were 6.71mm, 5.08mm in female. Ricketts' esthetic line to LS, LI were -0.40mm, 1.72mm in male. Ricketts' esthetic line to Ls, LI were -1.38mm 0.65mm in female. 9. In fifth adult group, the facial convexity angle and lower facial component angle were $171.17^{\circ}142.94^{\circ}$ in male and $172.5^{\circ}$, $144.41^{\circ}$ in female.

• The korean journal of orthodontics
• /
• v.8 no.1
• /
• pp.49-58
• /
• 1978

This investigation was undertaken to know how the bony facial profile could be changed with age. The 5 serial lateral cephalometric roentgenograms of the fourteen boys and fourteen girls between 7 and 11 years of age were studied and the findings seems to warrant the following conclusions. 1. The manaible tended to become more prognathic in relation to the cranial base (S-N) during growth, but the maxilla showed very little change. 2. There was increase in the inclination of the lower border of mandible associated with the increase in mandibular prognathism. 3. There was a tendency to being straight in bony facial profile due to the decrease in angle ANB with age. 4. The chin portion had a tendency to forward and downward growth in relation to the cranial base but there was slight strong tendency in downward growth. 5. The vertical growth was more prominant in the maxilla than in the mandible. 6. There was uniform and gradual increase of all measurements during growth. 7. Dimension of the craniofacial complex was larger in the boys than in the girls but this difference was not statistically significant. 8. Individual variation in skeletal growth was a normal occurrence.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.191-198
• /
• 1991

This is a case report and review of literature of the facial asymmetry corrected by various surgical methods. In case 1, facial asymmetry resulted from osteochondroma of condyle and corrected via condylectomy only. In case 2, unilateral condylar hyperplasia with compensatory maxillary growth resulted in severe facial asymmetry. Procedures used in case 2 are vertical ramus osteotomy, condylectomy, genioplasty, mandibular inferior border ostectomy and Le Fort I osteotomy.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.523-534
• /
• 1996

This study was to investigate the horizontal & vertical bone change pattern when using cervical headgear in Class II malocclusion of growing children and compared the skeletal features between the group with increased lower facial height and the group without increase in lower facial height. The results are as follows ; 1. Forward growth of maxilla was inhibited, downward tipping of anterior palatal plane could be seen and distal movement of maxillary first molar was observed. 2. There was relative forward movement of Mandible against the Maxillary cranial base, and relative forward movement of mandibular 1st molar against the Maxilla and vertical increase due to alveolar growth of Mandible. 3. There was significant increase in anterior and posterior facial heights but the ratio of facial height showed no significant difference. 4. The group with increased lower facial height has shorter ramus length, than the smaller palatal plane angle, and more distal movement of Maxillary 1st molar than the group without increase Ha-young Hyun

• The korean journal of orthodontics
• /
• v.19 no.3
• /
• pp.147-160
• /
• 1989

Long face patients are characterized by excessive anterior facial height, lip incompetence at rest, anterior open bite, and gummy smile. A major problem is an inferior rotation of the posterior maxilla and upper molars. Long face patients have been the most difficult for orthodontist to treat successfully. In growing patients, the methods for impeding excessive vertical growth have been used high pull head gear, functional appliance, and combined type of two. One significant improvement comes from using a full arch splint to deliver force to the maxilla more vertically. In adult patients, orthodontic camouflage treatment is biomechanically difficult and doesn't work when the problem is primarilly vertical. Surgical maxillary impaction provides a means for successfully treating most of problems. Also, superior reposition of the chin via a mandibular inferior border osteotomy is effective in decrease of lower anterior facial height and correction of the poor chin-lip balance. Post-surgical stability and the physiologic response are good. The coordinated orthodontic and surgical treatment is necessary for solution the difficult skeletal deformity.

• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.61-65
• /
• 2014

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the ${\beta}$ angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean ${\beta}$ angle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, ${\beta}$ angle showed no significant difference in different types of facial growth.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.77-93
• /
• 1989

The purpose of the present study were to disclose whether the depth of the mandibular antegonial notch can be used as an indicator of mandibular growth potential. The patients composed of 76 samples and were classified following 3 groups, based on the depth of mandibular antegonial notch : Deep notch group (more than 3mm), Neutral notch group (1-3mm), Shallow notch group (less than 1mm). For each case, the first lateral cephalograms were taken prior to the start of treatment and the second films 3-4 years after. The results were as follows; 1. Deep notch group had a shorter corpus, less ramus height and greater genial angle than did Shallow notch group. 2. Deep notch group had a more retrusive mandibular position than Shallow notch group. 3. Deep notch group had longer total anterior facial height and longer anterior lower facial height group. 4. Deep notch group grow vertical clockwise growth pattern, while Shallow notch group grow horizontal counterclockwise growth pattern. 5. Deep notch group had less mandibular growth than Shallow notch group during observation period.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.23-35
• /
• 1979

The present study has the purpose of investigating various growth and developmental aspects of rabbit snout with the aid of metallic implantation and of improving on the indirect method of growth and developmental studies of its skull. Sixty-eight growing albino rabbits were used. A head holder, film holder, cephalometer, metallic implanting device and implant materials were designed and constructed by the author. Eight metallic pins were implanted with a metallic implanting device in the rabbit snout under general anesthesia. Two metallic pins were implanted on each side of the interfrontal suture and another two were put on each side of the internasal suture near the frontonasal suture. Serial cephalograms were taken with a two-week interval, using the head holder, film holder and cephalometer. Eight items of linear measurement were obtained from the film. On the base of the results of the study, the following conclusions are obtained: 1. The metallic implant method is better than the other indirect methods for growth and developmental studies of the rabbit skull. 2. Most of the vertical growth of the rabbit snout is due to sutural growth at the frontonasal suture and the horizontal growth is at the interfrontal and the internasal suture. 3. The vertical growth of the rabbit snout is greater than the horizontal growth. 4. The horizontal growth of the rabbit snout is greater at the nasal bone than at the frontal bone. 5. The amount of vertical growth of the rabbit snout is almost same at inner and outer side of the interfrontal and internasal suture line, 6. Growth rate of the sutural growth of the rabbit snout tends to decrease by the growth of the rabbit. 7. Implant materials do not disturb growth and development of the rabbit snout, except a slight trauma effect during the first week of metallic implantation.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.799-817
• /
• 1994

The purpose of this study was to evaluate the initial skeletal pattern and growth change of whom had responsed well to chincap therapy. 93 patients seleted for this study were in mixed dentition and treated with chincap for more than 2 years. And 54 subjects were selected from these total samples and classified into two groups by the improvement of four measurements : ANB difference, APDI, Wits appraisal, and AF-BF. One was good response group which consisted of 26 children and the other was poor response group with 19 patients. Various measures of the craniofacial structure in the initial lateral cephalograms and the annual increments were calculated and analyzed by comparing two groups with t-test. The results were as follows : 1. Good response group had more horizontal growth pattern in initial stage of treatment than poor response group, and the contributing factors of this result were anterior posterior facial height ratio, gonial angle, lower genial angle and SN-mandibular plane angle. 2. The maxilla was positioned more anteriorly in good response group. 3. The amounts of vertical growth of maxilla was smaller but the horizontal growth of maxilla was larger in good response group. 4. The mandible rotated more infero-posteriorly in good response group. 5. The good response group had more vertical growth pattern of mandibular condyle.

• The korean journal of orthodontics
• /
• v.19 no.3
• /
• pp.87-97
• /
• 1989

This investigation was undertaken to know how soft tissue facial profile could be changed with age. The 3 serial lateral cephalometric roentgenograms of the twenty nine boys and twenty six girls between 9 and 13 years of age were studied and the findings seemed to warrant the following conclusions. 1. The author made the tables of means, standard deviations in each item, sex, age. 2. Soft tissue facial angle, soft tissue facial convexity including the nose tended to increase, but others tended to remain relatively stable. 3. Facial soft tissue thickness increased with age and the growth of facial soft tissue in the middle region (point A, LS, LI) was greater than others in the facial region. 4. In the soft tissue vertical proportions, G1'-Sn/Sn-Me' was 1.1, Sn-St/St-Me' was 0.51:1, Sn-LI/LI-Me' was 0.82:1 and those were stable with age.