• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.89-96
• /
• 2012

Based on the hydroelastic theory and the matched eigenfunction expansion method(MEEM), the dynamic behavior of the porous flexible net sheet and wave forces have been investigated in monochromatic waves. The net sheet is installed vertically with the submergence depth. Top end of a net sheet is fixed and its lower end is attached by a clump weight. It is assumed that the initial tension is sufficiently large so that the effects of dynamictension variation can be neglected. The boundary condition on the porous flexible net sheet is derived based on Darcy's fine-pore model and body boundary condition. The developed analytic model can be extended to the impermeable/permeable vertical plate and the impermeable flexible membrane. The analytical model was used to study the influence of design parameters(wave characteristics, porosity, submergence depth, initial tension) on the response characteristics and wave load of the net sheet.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.1
• /
• pp.1-32
• /
• 2016

This research intended to conduct literary research on 'Jeok' of 25 jong-ga through Jong-ga Ancestral Ritual Formalities and Food, published by the Cultural Heritage National Research Institute of Cultural Heritage during 2003~2008, and compared and analyzed an arranging method and recipe transmission process by directly visiting four Jong-ga. Religious ceremony foods of Jong-ga could be divided according to the standard of the hakpa attribute (large), regional attribute (midium), and family attribute (small), which forms a complex connection structure between the attributes. 'Jeok' arranging form is divided into '3-Jeok building method (vertical structure)', '3-Jeok arrangement method (horizontal structure)', '3-Jeok replacement method', '2-Jeok arrangement method', 'Jeon-Jeok arrangement method', and 'Others-Jeok arrangement method'. Generally, 'jeok' arrangement order per hakpa is in the order of 'meat jeok - chicken jeok - fish jeok' in case of Gihohakpa, whereas Yeongnamhakpa is in the order of 'fish jeok - meat jeok - chicken jeok'. Umoringye (羽毛鱗介), the method of laying 'dojeok' of the Gyeongbuk region, could be found in the 2nd century B.C. Chinese ancient book Hoenamja and the theoretical background was Yin and yang philosophy (陰陽論). This research has significance in terms of securing advanced results compared to advanced research that has so far concentrated on some regions and hakpas.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.3
• /
• pp.77-87
• /
• 2013

Objective: The purpose of this study was to obtain the basic data for the establishment of the curriculum from the analysis of knowledge and attitudes about AIDS among dental hygiene students. Methods: Data was collected from the students of two colleges majoring in dental hygiene in Daegu, using questionnaire. They were the students of total 390. The analysis was made using t-test, (one-way ANOVA), and multiple linear regression analysis. These were conducted using SPSS 14.0 version. Results: The horizontal and vertical transmission in percent correct knowledge of HIV infection, most of the questions asked of respondents knew the correct answer, AIDS attitudes in the community education hours to receive AIDS education is important then the response was highest at 88.2 percent. AIDS knowledge is based on clinical practice, and AIDS attitudes in accordance with the educational experience of the average difference between groups investigated showed statistically significantly. HIV knowledge and attitudes, no oil, depending on the educational experience of the average difference between groups investigated showed statistically significantly. The grade, the higher knowledge of HIV was found to be lower in a statistically significant negative relationship showed (p<0.001), clinical experience, the more experience, knowledge of HIV was higher statistically significant positive showed a relationship (p<0.001), a higher attitude about HIV AIDS knowledge was higher showed a statistically significant positive relationship (p<0.001). Conclusion: Dental hygiene to prevent infection associated with AIDS in the curriculum and hands-on curriculum to enhance patient care through the AIDS patients in clinical management after graduating as a dental hygienist at the ethical responsibility is considered to be very strong.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.8 no.1
• /
• pp.91-95
• /
• 2005

The familial environment may also play an important role in the epidemiology of HCV infection through vertical and horizontal transmission by infected household members. However, it is still controversial whether familial clustering of HCV occurs. We experienced a case of familial clustering of hepatitis C virus. A 10-year old girl presented with nausea, vomiting and anorexia for a month was diagnosed as hepatitis C. Her mother, grandmother, a maternal aunt and her daughter had contracted with HCV. Her laboratory findings showed AST/ALT 63/122 IU/L, positive anti-HCV Ab and HCV RNA ($3.54{\times}10^5copies/mL$). Pathologic findings of the liver biopsy revealed chronic hepatitis with minimal lobular activity, mild porto-periportal activity and mild portal fibrosis. After treatment with interferon-${\alpha}$ 2b for 6 months, the clinical symptoms and laboratory findings were normalized.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.3-38
• /
• 2000

Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.645-653
• /
• 2014

Recently, the ocean field researches such as offshore plant, ocean survey and underwater monitoring systems are garnering the attention from both academy and industry. However, the communication in underwater environment is very difficult because of the unique irregular features in water. This is the reason that the application of terrestrial protocols to the water environment is not proper. This paper proposes a routing algorithm that can enhance communication reliability by utilizing channel properties in underwater environment. We address two problems that lead to the poor communication performance, signal attenuation and multi-path problem in water. Overcoming these problems, the proposed algorithm ensures high packet delivery ratio and low transmission delay. Also, this paper evaluates the performance through simulation.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.148-154
• /
• 2006

The effect of small-scale near surface inhomogeneity on Rayleigh wave propagation and dispersion has been investigated in this study using two-dimensional FEM elastic modeling. Various inhomogeneity models with a variety of geometrical shape and embedment depth which exist in homogeneous half-space and two-layered media are considered. Results show that any near surface inhomogeneity greater than one wavelength in terms of minimum wavelength of Rayleigh wave shows dispersion characteristics. Such dispersion effect become stronger as the dimensions of the inhomogeneity increase. The effect of horizontal dimension is more dominant factor governing the dispersion characteristics than vertical dimension. However, the dispersion effect can not be identifiable in seismogram if the horizontal dimension is not wide enough. Nonetheless, even in this case, the existence of inhomogeneity can be inferred by the reflection or transmission event of Rayleigh wave. The results can be expected to provide insights on the behavior of Rayleigh wave which may be helpful for designating field work or new processing scheme to detect near surface inhomogeneity by surface wave method.

• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.207-214
• /
• 2007

We fabricated thermally-evaporated 10 -Ni/(poly)Si and 10 -Ni/1 -Ir/(poly)Si structures to investigate the microstructure of nickel monosilicide at the elevated temperatures required for annealing. Silicides underwent rapid at the temperatures of 300-1200 for 40 seconds. Silicides suitable for the salicide process formed on top of both the single crystal silicon actives and the polycrystalline silicon gates. A four-point tester was used to investigate the sheet resistances. A transmission electron microscope(TEM) and an Auger depth profile scope were employed for the determination of vertical section structure and thickness. Nickel silicides with iridium on single crystal silicon actives and polycrystalline silicon gates shoed low resistance up to 1000 and 800, respectively, while the conventional nickle monosilicide showed low resistance below 700. Through TEM analysis, we confirmed that a uniform, 20 -thick silicide layer formed on the single-crystal silicon substrate for the Ir-inserted case while a non-uniform, agglomerated layer was observed for the conventional nickel silicide. On the polycrystalline silicon substrate, we confirmed that the conventional nickel silicide showed a unique silicon-silicide mixing at the high silicidation temperature of 1000. Auger depth profile analysis also supports the presence of thismixed microstructure. Our result implies that our newly proposed iridium-added NiSi process may widen the thermal process window for the salicide process and be suitable for nano-thick silicides.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.51-63
• /
• 2004

The purpose of this study was to investigate a three dimensional kinematic variables about the last stride and the release phase of the throwing technique for female javelin throwers. For the motion analysis, Six female javelin throwers were used as subjects. Three-dimensional coordinates were collected using the Kwon3D Motion Analysis Package Version 2.1 Program. Two S-VHS Video Cameras were used to record the locations and orientations of control object and the performances of the subjects at a frequency of 6.0 HZ. After the kinematic variables such as the time, the distance, the velocity, and the angle were analyzed about the last stride and release phase, the followings were achieved; 1. For the effectively javelin throwing, the subjects appeared to do long the approach time in the phasel of landing phase, and short the delivery time in release phase 2. In the release event, the other subjects except for subject A appeared to throwing in the lower condition than the height of themselves. This result showed to slow the projecion velocity. 3. For increase the projection vcelocity of the upper extremity joint in the release event, it appeared to do extend rather the shoulder angle than increase the extension of elbow joint. 4. The body of COG angle showed to gradually increase nearly at the vertical axis in the release event. But the front lean angle of trunk showed a small angle compare to increase of the body of COG angle. Therefore for the effectively momentum transmission of the whole body in the javelin, the front and back lean angle of trunk appeared to do fastly transfer the angle displacement in the arch posture or the crescent condition during the deliverly motion of the release phase.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.34.1-34.1
• /
• 2009

A great deal of attention has been focused on ZnO nanowires for various electronics and optoelectronics applications. in the pursuit of next generation nanodevices, it would be highly preferred if well-ordered ZnO nanowires of lower dimension could be fabricated on silicon. Before the growth of nanowires, silicon substrates were selectively etched using silicon nitride as masking layer. Vertical aligned ZnO nanowires were grown by metal organic chemical vapor deposition on patterned silicon substrate. The shape of nanostructures was greatly influenced by the micropatterned surface of the substrate. The aspect ratio, packing fraction and the number density of nanowires on top surface are around 10, 0.8 and $10^7\;per\;mm^2$, respectively, whereas the values are 20, 0.3 and $5\times10^7\;per\;mm^2$, respectively, towards the bottom of the cavity. XRD patterns suggest that the nanostructures have good crystallinity. High-resolution transmission electron microscopy confirmed the single crystalline growth of the ZnO nanowires along [0001] direction.