• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.198-202
• /
• 1987

The regulator problem can be considered as some impulsive disturbance rejection one. In this point of view, the rate of decay is one of important factors for regulation and depends on how negative the real parts of the eigenvalues of closed-loop system. The algorithm that the closed-loop system has eigenvalues lying within a vertical. strip is useful for rapid disturbance rejection. This paper presents a design method for a linear quadratic regulator of two-time scale system with eigenvalues in a vertical strip by use of time-scale separation property.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.91-100
• /
• 2004

본 논문은 2개의 영상을 이용, disparity algorithm을 바탕으로 영상에 나타난 물체의 깊이 정보를 영상의 밝고 어두운 정도로 나타낼 수 있는 방법을 제안한다. 또한 제안된 방법을 이용, 실시간 동작이 가능한 하드웨어 설계 및 구현을 실현한다. 실시간 동작을 위해 본 논문에서는 수직축 strip 구조를 이용하여 영상들의 유사 정도를 계산하였다. 물체의 거리 정보를 흑백영상으로 변환하여 가까이 있는 물체는 밝게, 멀리 있는 물체는 어둡게 나타낼 수 있도록 하여 각종 영상장치에서 확인할 수 있도록 하였다. 본 논문에서 제안한 방법의 하드웨어는 30 frame/sec의 동작을 하도록 설계하여 Altera APEX20K1000EBC6S2-3의 device를 사용하여 검증하였으며, Hynix 0.35㎛ CB35 ASIC library와 256PQFP package를 이용하여 IC로 제작하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.544-548
• /
• 2007

In general, final width of hot strip should be accomplished in this stage because width reduction of strip hardly appears during typical finishing mill. However, it is difficult to control the width of strip in the roughing mill process as the horizontal rolling of strip is subsequently performed after the vertical rolling. It is therefore important to obtain the deformation rolling direction on strip width to minimize the width spread of strip during horizontal rolling after vertical rolling. Generally there is Sizing press type and Edger-roll type. The width reduction process in sizing press has small amount of width spread compared with the edger. However, productivity by the sizing press process is much lower than those of the edger. In this study, sizing press and Edger-roll process parameters in a sheet rolling mill were set at specified values and the effect of the change in these parameters on product quality and process performance were evaluated.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.409-416
• /
• 2002

기존의 면진 기술을 일반건물에 적용하기 위해서는 낮은 가격과 낮은 무게로 면진 베어링이 제작 및 공급되어야 한다. 이에 본 논문에서는 일반건물에 면진 기술을 적용하기 위한 방법으로 기존의 적층고무 면진 베어링에 철판을 대체하여 섬유로 보강하고, 고무와 섬유의 층으로 구성된 벨트 타입의 면진 베어링을 제안하였다. 또한 제안한 섬유보강 면진 베어링을 설계 및 제작하여 수직실험과 수평실험을 수행하여 그 성능을 검증하였다. 따라서, 스트립형의 면진 베어링이 제작가능하며 일반건물의 필요한 크기로 절단이 가능함을 보였다. 또한 수평 실험 수직 실험을 통해서 기존의 적층고무 면진 베어링을 대체하여 사용할 수 있는 결과를 보였다. 이와 같은 결과를 통해서 일반건물에 낮은 무게와 낮은 가격의 면진 베어링을 공급할 수 있음을 보였다. 이 연구결과로 인해 스트립형의 섬유보강 면진 베어링이 저가건물에 널리 사용될 수 있을 것으로 기대된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.202-209
• /
• 1996

In this paper, two dimensional vertical and comer infinite elements which can include multiple wave components to model underlying half space are developed. These elements are natural and economical to model underlying stiff half space or rock. To verify the behavior of these infinite elements, vertical, horizontal, and rocking compliances of a rigid strip foundation on a viscoelastic soil profile are analyzed and compared with those of Tzong and Penzien who used the boundary solution method. Good agreements are noticed between the two methods. The influence of material properties like Poisson's ratio, material damping, and stiffness ratio of layers as well as the influence of geometrical properties such as layer thicknesses and depth of foundation embedment are studied. Example analysis is carried out for the shaking table which is located in KIMM(Korea Institute of Machinery and Materials), and the vertical and horizontal displacements of the analysis are compared with the measured, and show good results and demonstrate the efficiency of the proposed method.

• 한국지진공학회논문집
• /
• 제6권6호
• /
• pp.1-6
• /
• 2002

기존의 면진 기술을 일반건물에 적용하기 위해서는 낮은 가격과 낮은 무게로 면진 탄성받침 이 제작 및 공급되어야 할 필요가 있다. 이에 본 논문에서는 일반건물에 면진 기술을 적용하기 위한 방법으로 기존의 적층고무 면진 탄성받침에 철판을 대체하여 섬유로 보강하고, 고무와 섬유의 층으로 구성된 스트립형의 면진 탄성받침을 제안하였다. 또한 제안한 섬유보강 면진 탄성받침을 설계 및 제작하여 수직실험과 수평실험을 수행하여 그 성능을 검증하였다. 따라서, 스트립형의 면진 탄성받침이 제작가능하며, 필요한 크기로 절단이 가능함을 보였다. 또한 수평 실험 수직 실험을 통하여 기존의 적층고무 면진 탄성받침을 대체하여 사용할 수 있음을 보였다. 이 연구결과로 인해 스트립형의 섬유보강 면진 탄성받침이 저가건물에 널리 사용될 수 있을 것으로 기대된다.

• 대한수학회논문집
• /
• 제37권2호
• /
• pp.537-549
• /
• 2022

In this paper, we consider a convex univalent function f_α,β which maps the open unit disc 𝕌 onto the vertical strip domain Ω_α,β = {w ∈ ℂ : α < ℜ < (w) < β} and introduce new subclasses of both close-to-convex and bi-close-to-convex functions with respect to an odd starlike function associated with Ω_α,β. Also, we investigate the Fekete-Szegö type coefficient bounds for functions belonging to these classes.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.217-223
• /
• 2015

In order to predict the motions of a planing hull in waves, it is necessary to accurately estimate the force components acting on the hull such as the hydrodynamic force, buoyancy, and friction, as well as the wave exciting force. In particular, based on strip theory, hydrodynamic forces can be estimated by the summation of the forces acting on each cross-section of the hull. A non-linear strip method for planing hulls was mathematically developed by Zarnick, and his formula has been used to predict the vertical motions of prismatic planing hulls in regular waves. In this study, several improvements were added to Zarnick's formula to predict the vertical motions of warped planing hulls. Based on calm water model test results, the buoyancy force and moment correction coefficients were modified. Further improvements were made in the pile-up correction. Pile-up correction factors were changed according to variations of the deadrise angles using the results found in previous research. Using the same hull form, captive model tests were carried out in other recent research, and the results were compared with the present calculation results. The comparison showed reasonably good agreements between the model tests and present calculations.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.503-509
• /
• 2014

This paper describes the time-domain numerical method for prediction of slamming loads on a ship in waves using the strip theory. The slamming loads was calculated considering the relative vertical velocity between the instantaneous ship motion and wave elevation. For applying the slamming force on a ship section, the momentum slamming theory and the empirical formula-based bottom slamming force were used corresponding to the vertical location of wetted body surface. Using the developed method, the vertical bending moments, relative vertical velocities, and impact forces of S175 containership were compared in the time series for various section locations and wave conditions.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.991-997
• /
• 2013

In this paper, we propose a CFWC (CCD and fuzzy PID based width control) scheme to obtain the desired delivery width margin of a vertical rolling mill in hot strip process. A WMS(width measurement system) is composed of two line scan cameras, an edge detection algorithm, a glitch filter, and so on. A dynamic model of the mill is derived from a gauge meter equation in order to design the fuzzy PID controller. The controller is a self-learning structure to select the PID gains from the error and error rate of the width margin. The effectiveness of the proposed CFWC is verified from simulation results under a width disturbance of the entry in the mill. Using a field test, we show that the performance of the width control is improved by the proposed control scheme.