• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 추계학술대회
• /
• pp.75-79
• /
• 2005

최근에 모바일 기기의 급속한 발전과 더불어 다양한 서비스들이 개발되고 있다. 그 중에서도 위치 기반 서비스는 사용자에게 위치와 관련된 유용한 정보를 제공하는 서비스를 말한다. 효과적인 서비스를 제공하기 위해서는 먼저 위치정보를 나타내는 이동 객체 관련기술 연구가 선행되어야 한다. 이러한 연구의 핵심 기술로 현재 빈발한 이동 객체 탐사를 위한 마이닝 기법들에 관한 연구가 진행되고 있다. 본 연구에서는 기존의 수평적 마이닝 기법에서 문제시되었던 많은 후보 이동 객체 발생을 줄이기 위해 새로운 수직적 마이닝 기법을 적용한 방법을 제안한다.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.77-90
• /
• 1990

The purpose of this study was to compare the amount of the vertical pin opening of $33^{\circ}$ resin and $0^{\circ}$ resin teeth during processing and to determine whether the changes in tooth contacts by using articulation ribbon and T-Scan system follow any identifiable pattern, and to determine if there is any correlation between the changes in tooth contacts and the amount of the vertical pin opening after processing. Through statistical analyses on the data from this study, the following conclusions were obtained. 1. The amounts of the vertical pin opening were 0.78m, 0.87mm for $0^{\circ}$ teeth and $33^{\circ}$ teeth, respectively. But there was no significant difference between them. 2. The total number of contact points recorded by articulating ribbon after processing was decreased to 442.5% of that before processing. 3. The mean values for the number of contact points per tooth recorded by articulating ribbon after processing were 4.3 for the second molar, 3.8 for the first molar, 1.3 for the second premolar, 0.8 for the first premolar. The reduction of contact points per tooth became greater moving in an anterior direction. 4. The correlation between the reduction of contact points and the amount of the pin opening after processing was not significant. 5. The mean values for the numbers of contact points per tooth recorded by T-Scan system after processing were 2.2, 2.5, 1.0, and 0.5 at the second molar, the first molar, the second premolar, and the first premolar, respectively. 6. The correlation between the number of contact points by using articulating ribbon and TScan system after processing was not significant.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.144-147
• /
• 2001

The planar tracked vehicle model used in this investigation consists of two kinematically decoupled subsystem, i.e., the chassis subsystem and the track subsystem. The chassis subsystem include the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints, In this paper, the recursive kinematic and dynamic formulation of the tracked vehicle is used to find the vertical forces and the distances of the certain track moved in the driving direction along the track. These distances and vertical forces obtained are used to calculate the sinkage of a terrain. The FEM is adopted to analyze the interaction between the tracked vehicle and terrain. The terrain is represented by a system of elements with specified constitutive relationships and considered as a piecewise linear elastic, plastic and isotropic material. When the tracked vehicle is moving with different speeds on the terrain, the elastic and plastic deformations and the maximum sinkage for the four different types of a isotropic soil are simulated.

• International Journal of Contents
• /
• 제6권4호
• /
• pp.49-56
• /
• 2010

In this paper we present a system that enables the user to interact with large display system even without touching the screen. With two infrared sensitive cameras mounted on the bottom left and bottom right of the display system pointing upwards, the user fingertip position on the selected region of interest of each camera view is found using vertical intensity profile of the background subtracted image. The position of the finger in two images of left and right camera is mapped to the display screen coordinate by using pre-determined matrices, which are calculated by interpolating samples of user finger position on the images taken by pointing finger over some known coordinate position of the display system. The screen is then manipulated according to the calculated position and depth of the fingertip with respect to the display system. Experimental results demonstrate an efficient, robust and stable human computer interaction.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.459-466
• /
• 2000

전정기관 자극용 회전자극기에 있어서 외란 관측기를 이용한 PMSM(permanent Magnet Synchronous Motor)의 강인한 정밀 속도 제어 방법에 대해서 제안한다. 본 제어기는 더욱 정확한 전정기관 평가를 가능하게 한다. 현기증을 유발시키기 위해서 지면에 수직인 회전축을 갖는 2D 자극기가 사용되어져 왔다. 그러나 정확한 현기증의 원인 규명을 위해서 회전축을 기울인 3D 자극기가 필요하다. 3D 자극기와 같이 기울임을 갖는 회 전자극기의 경우, 회전축에 대한 무게중심의 이격은 불평형 부하를 유발하게 된다. 이러한 경우에 대하여 강인한 속도 제어를 위한 외란 관측기를 이용하는 보상방법을 연구하였다 정확한 전정기관 자극을 위해 정밀한 속도 제어가 필요하며, 이러한 정밀 속도 제어에 있어서 외란의 영향을 제거하기 위해 데드비트 관측기와 같은 높은 이득을 갖는 관측기가 필요하다. 외란 관측기의 위치 제어에 대한 응용이 연구되어 졌다. 그러나 속도와 같은 노이즈가 많은 신호를 이용한 속도 제어에 있어서 데드비트 관측기는 노이즈 증폭 효과를 가져와 적용이 어렵다는 문제를 가지고 있다. 따라서 MA(Moving Average)처리를 이용하여 노이즈 효과를 저감한다. 이상의 제안된 알고리즘의 효과를 실험으로 보였다.

• 전자공학회논문지 IE
• /
• 제47권2호
• /
• pp.38-46
• /
• 2010

본 논문에서는 스테레오 비젼 기법에 기반한 작업자 모니터링을 위한 자동 감시추적 시스템을 제안하였다. 즉, 인간 시각 시스템을 모방한 교차식 스테레오 카메라 시스템의 특성을 이용하여 작업자의 인식은 물론 추적, 감시가 가능한 새로운 형태의 지능형 감시추적 시스템을 설계 제안하였다. 즉, 작업자 표적의 다양한 변화에 관계없이 배경과 분리된 표적인식은 물론 움직이는 표적의 3차원적 위치 정보를 검출함으로써 실시간적 물체인식 및 추적이 가능한 새로운 형태의 지능형 스테레오 감시 추적 시스템을 제시하였다. 실험결과, 교차식 스테레오 카메라 기반의 이동물체 감시추적 시스템의 실험결과 팬과 틸트를 통한 물체추적 후 표적 중심좌표의 수평, 수직 평균오차는 1.82%, 1.11%의 매우 낮은 에러 값을 각각 유지하였으며, 추정된 물체의 3차원 위치좌표의 경우도 실제 물체 위치값과 비교하여 평균 2.5% 이하의 낮은 오차가 나타남이 분석되었다. 따라서, 본 논문에서 제안한 팬과 틸트가 탑제된 스테레오 카메라 기반의 감시추적 시스템은 복잡한 배경 및 주위환경 변화에도 이동 물체를 효과적으로 추출하여 적응적으로 감시 및 추적이 가능한 산업용 무인 감시추적 시스템의 구현 가능성을 제시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.465-469
• /
• 2006

In recent years there has been considerable interest in the construction of super high-rise buildings. From the prior art, various procedures and devices for surveys during and after the phase of erection of a high-rise building are known. High-rise buildings are subject to strong external tilt effects caused, for instance, by wind pressures, unilateral thermal effects by exposure to sunlight, and unilateral loads. Such effects are a particular challenge in the phase of construction of a high-rise building, in as much as the high-rise building under construction is also subject to tilt effects, and will at least temporarily lose its - as a rule exactly vertical - alignment. Yet construction should progress in such a way that the building is aligned as planned, and particularly so in the vertical, when returning into an un-tilted basic state.It is essential that a straight element be constructed that theoretically, even when moving around its design centre point due to varying loads, would have an exactly vertical alignment when all biasing conditions are neutralised. Because of differential raft settlement, differential concrete shortening, and construction tolerances, this ideal situation will rarely be achieved. This paper describes a procedure developed by the authors using GPS observations combined with a network of precision inclination sensor to provide reliable coordinated points at the top of the worldwide highest-rise building under construction in Dubai.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.82-89
• /
• 2003

A robust motion control method is proposed fur the point-to-point position control of a XY positioning system which consists of a base cart, elastic ben and moving mass. The horizontal motion controller consists of the feedforward controller to suppress the single mode vibration of the elastic beam and the feedback controller to get the high-accuracy positioning performance of the base cart. Input preshaping vibration suppression method based on system modeling with analytic frequency equation is proposed and integrated into the robust internal-loop compensator(RIC) to increase the robustness of the whole closed-loop system The vertical motion controller is proposed based on the dual RIC structure. Through experiments, it is shown that the proposed method can stabilize the system and suppress the vibration in the presence of uncertainties and disturbances.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.365-372
• /
• 2010

Station is an important building in high-speed railway, and its vibration and noise may significantly affect the comfort of waiting passengers. A coupling vibration model for train-structure system is established to analyze and evaluate the vibration level of a typical waiting hall under dynamic train load. The motion of a four-axle vehicle with two suspension system is modeled in multi-body dynamics with linear springs and dampers employed. The station is modeled as a whole finite element structure which is 113 m in longitudinal and 163.5 m in lateral, and the stiffness of the station foundation is considered. According to the assumptions that both wheel and rail are rigid bodies and keep contact to each other in vertical direction, and the wheel/rail interaction and displacement coordination in horizontal direction is defined by the simplified Kalker creep theory, the vehicle spatial vibration model has 27 degrees-of-freedom. An overall analysis procedure is made of the train moving through the station, by which the dynamic responses of the train and the station are calculated. According to the comparison between analysis and test results, the actual connection status between different parts of the station is estimated and the vibration level of the waiting hall is evaluated.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.200-210
• /
• 2006

This paper proposes the motion generation method in which the movement of the 3-links leg subsystem in constrained to slider-link and a singular posture can be easily avoided. This method is the realization of jumping control moving in a vertical direction, which mimics a cat's behavior. To consider the movement from the point of the constraint mechanical system, a robotics system for realizing the motion will change its configuration according to the position. The effectiveness of the proposed scheme is illustrated by simulation and experimental results.