• 대한공간정보학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2014

최근 정부는 정부3.0이라는 새로운 정부운영의 패러다임으로 공공데이터를 적극적으로 개방하고 공유하는 정책을 펼치고 있다. 이와 함께 국토교통부에서는 국가공간정보 및 3차원건물, 영상지도를 포함한 다양한 콘텐츠를 일반인에게 제공하는 공간정보 오픈플랫폼 통합지도서비스(이하 브이월드)를 운영하고 있다. W3C재단의 오픈데이터 현황 보고서(2013)의 평가결과 우리나라는 정부의 정책적 지원 및 계획 부분에서는 긍정적인 결과를 나타낸 반면 데이터 관리 분야에서 취약하여 이에 대한 품질개선이 필요한 실정이다. 또한, 3차원 공간정보 객체 데이터(이하 3차원 모델)의 경우 데이터 구축에 활용한 디지털항공사진영상의 최신성이 부족하여 데이터의 현행화가 필요하다. 이에 본 논문에서는 3차원 모델의 품질요소인 수직위치 정확도에 대해 공공데이터이며, 실측 데이터인 건축물 대장의 높이 데이터를 기준으로 국내표준 품질평가 기법을 적용하여 데이터 품질을 측정하고, 측정오차에 대한 원인을 분석하여 공공데이터를 활용한 3차원 모델의 수직위치 정확도 향상 및 최신성의 유지 가능성을 제시하고자 한다. 연구 수행 결과 건축물대장의 높이 값을 품질평가 기준으로 적용하였을 경우 수직위치 정확도가 향상되는 것을 확인하였으며, 건축물 대장의 재건축, 증축 정보를 활용할 경우 3차원 모델의 최신성의 유지를 할 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.47-56
• /
• 2014

Purpose: In protected crop production facilities such as greenhouse and plant factory, farmers should be present and/or visit frequently to the production site for maintaining optimum environmental conditions and better production, which is time and labor consuming. Monitoring of environmental condition is highly important for optimum control of the conditions, and the condition is not uniform within the facility. Objectives of the paper were to investigate spatial and vertical variability in ambient environmental variables and to provide useful information for sensing and control of the environments. Methods: Experiments were conducted in a strawberry-growing greenhouse (greenhouse 1) and a cherry tomato-growing greenhouse (greenhouse 2). Selected ambient environmental variables for experiment in greenhouse 1 were air temperature and humidity, and in greenhouse 2, they were air temperature, humidity, PPFD (Photosynthetic Photon Flux Density), and $CO_2$ concentration. Results: Considerable spatial, vertical, and temporal variability of the ambient environments were observed. In greenhouse 1, overall temperature increased from 12:00 to 14:00 and increased after that, while RH increased continuously during the experiments. Differences between the maximum and minimum temperature and RH values were greater when one of the side windows were open than those when both of the windows were closed. The location and height of the maximum and minimum measurements were also different. In greenhouse 2, differences between the maximum and minimum air temperatures at noon and sunset were greater when both windows were open. The maximum PPFD were observed at a 3-m height, close to the lighting source, and $CO_2$ concentration in the crop growing regions. Conclusions: In this study, spatial, vertical, and temporal variability of ambient crop growing conditions in greenhouses was evaluated. And also the variability was affected by operation conditions such as window opening and heating. Results of the study would provide information for optimum monitoring and control of ambient greenhouse environments.

• 복식
• /
• 제58권3호
• /
• pp.131-148
• /
• 2008

Each stylistic period through history has its own unique look. The characteristic look of each period is completed and visualized with its prevailing ideologies, aesthetic consciousness and morality by means of 'form'. A period expresses its characteristics in accordance with form according to the widespread preferences of the time. Among the various cultural factors that form the look of the time, those that the period holds as ideal aesthetic values create the concept of 'ideal beauty' for that period. This study begins by establishing the conceptual definition of 'ideal beauty' and develops the premise that dress reflected ideal beauty. To attain the goal of the study, the selected objects are dresses represented in paintings, the actual garments from the Renaissance to Baroque periods and written references about art, art history, and history of costume. The results, based upon a theoretical study of the zeitgeist and aesthetic values of the 16th and 17th centuries, are as follows: first, ideal beauty influences the substance and form that constitute dress style. It is a byproduct of the spirit of time, the zeitgeist. The concept of ideal beauty is born within the lifestyle pursued by the ruling class and focuses on the body as an epitome of beauty, moral values, custom, lifestyle and taste as it becomes visualized via form. Second, the aspect of dress representing the ideal beauty of particular time varied according to the times. In both periods, power and dignity were used to achieve the ideal aesthetic values. In the Renaissance, power was expressed by the horizontal extension of dress (i.e. wide farthingales and sleeves) and in the Baroque period, by vertical extension (i.e. long and tall wigs, fontanges and trains). It can be said that fashion in both periods achieved an ideal, such as power and dignity, via the same means, by extending dress sizes, but the ways in which those ideals were portrayed in each period's dress yielded very contrary styles. It is understood through this study that ideal beauty influenced the dress style of the Renaissance and Baroque periods and played a decisive role in determining its forms and symbolic meanings.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.322-330
• /
• 2005

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1 : Clasp-retained mandibular removable partial denture with unsplinted abuhnents Group 2 : Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge Group 3 : Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm close to the abutments. Two vertical experimental loadings (100N and 200N) were applied subsequently via two miniature load cells that were placed at mandibular first molar regions. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Duncan test was used as post hoc comparisons. Results. Strain values increased as the applied load increased from 100N to 200N for all groups (p<.05). The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Under 100N loading, group 1 showed higher strain values than group 3 in absolute quantity (p<.05). Under 200N loading, group 3 showed higher strain values than group 1 and 2 in absolute quantity (p<.05). Group 1 showed higher strain values than group 2 (p<.05). Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments. Strain of bar-retained removable partial denture increased much more as applied load increased, but was compressive in nature.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.167-183
• /
• 2005

The purpose of this study was to analyze the kinetical variables of the lower extremity joints when performing uchimata(inner thigh reaping throw) by uke(receiver)'s two posture(shizenhon tai), jigohon tai), by voluntary resistance level(VRL) in judo. The subjects, who were for 3 male Korean national representative judokas(elite group : EG) and 3 male representative judokas of Korean University(non-elite group: NEG), and were filmed 4 DV video cameras(60fields/sec.), that posture of uke were shizenhon-tai (straight natural posture), jigohon-tai(straight defensive posture), VRL of uke was 0%. The selected trials were subject to 3-dimensional film motion analysis and ground reaction force(MRF) analysis. The kinetical variable of this study were temporal, postures( ankle and knee angle of attacking leg), that were computed through video film analysis, MRF at events were obtained from the ground-reaction force analysis by AMTI force plate system. When performing uchi-mata according to each posture and by VRL, from the data analysis and discussion, the conclusions were as follows : 1) Temporal variables : total time-required(TR) when performing uchi-mata was shown EG 0.13sec the shorter than NEG(o.77sec.) in shizenhon-tai. and EG 0.17sec the shorter than NEG(o.76sec.) in jigonhon-tai. Also, all of two groups' jigohon-tai(0.68sec.) were faster than shizenhon-tai(0.71 sec.). 2) The posture variables : The angle of ankle in attacking when performing were plantar flexion in EG, and dorsi flexion in NEG by shizenhon-tai and jigohon-tai posture. The angle of knee in attacking when performing were extension in EG and NEG, but range of extension in EG were larger than in NEG. 3) MRF : Vertical MRF when performing uchi-mata was shown the strongest in the 2nd stage of kake phase(2.23BW) by EG in both posture, and it was same value by NEG(2.23BW), but shizenhon-tai (2.28BW), jigohon-tai(1.64BW), respectively.

• 한국해안해양공학회지
• /
• 제16권2호
• /
• pp.108-119
• /
• 2004

안목항의 방파제 확장 건설로 인하여 항 남측에 심각한 침식현상이 광범위하게 발생하고 있는 데 본 연구에서는 이를 규명하기 위하여 수지 분석법과 수치 해석적 방법이 수행되었다. 또한 효율적인 연안통합관리를 위한 주기적인 관측 및 분석 시스템의 필요성을 강조하고 상세한 표사 이동의 변화를 제공하는 수치모형 시스템이 제시되었고 연안관리의 측면에서 어떻게 활용될 수 있는 지 안목항 침식 문제를 통하여 살펴보았다. 수치모형 시스템은 토사의 재부상율과 중력에 의한 침강율의 차이로 해저면의 변화를 산정하는 데 파랑 변형, 해빈류, 그리고 부유사 이송 및 확산 예측 모형과 결합되었다. 또한 침강율 산정 시 필요한 수심 평균 부유사 농도와 해저면 부유사 농도의 새로운 관계가 부유사 수직구조의 수학적 분석으로부터 제시되었다.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.878-887
• /
• 1998

Although attachments have been utilized for a retainer of removable prostheses during several decades, there is little information on the force distribution by the attachments. This study was undertaken to evaluate the stress patterns developed by partial dentures employing rigid attachments on the supporting structures. Four types of the mandibular removable partial dentures were designed depending upon the position of the rigid attachment and the existency of lingual bracing. Under 100N of vertical and 25N of lateral loads on the 1st and 2nd lower molar of partial denture, stress distribution patterns and displacement were analysed with three dimensional finite element method by ANSYS version 5.3. 1. The highest stresses were concentrated on the distal alveolar crest of posterior abutment and the second stresses on the apical region of posterior abutment in the models. 2. The greatest displacement were shown on the distal alveolar crest of posterior abutment and the second displacement on the distal alveolar crest of anterior abutment in the models. 3. There was little difference between the models with intraoral attachment and those with extracoronal attachment. 4. There was little difference between the models with and without the lingual bracing.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.551-560
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the men's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, the ratio of step length to his height, average velocity at the final 6~11 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and takeoff angle of COG. Swing up phase variables included: pole flexion angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height, run up velocity and approach position increased. However, horizontal velocity during the last two steps of the final approach decreased dramatically compared to speeds from 1990. These results reflect the change in both technique and improved physical fitness in pole vaulters. During extension, the peak height of COG averaged 0.3m higher then COG height when the pole was released. These specific results can help coaches and athletes modify training and improve performance.

• Journal of Korean Neurosurgical Society
• /
• 제54권5호
• /
• pp.405-410
• /
• 2013

Objective : The objective of this study was to investigate changes in the posterior cranial fossa in patients with symptomatic Chiari malformation type I (CMI) compared to a control group. Methods : We retrospectively reviewed clinical and radiological data from 12 symptomatic patients with CMI and 24 healthy control subjects. The structures of the brain and skull base were investigated using magnetic resonance imaging. Results : The length of the clivus had significantly decreased in the CMI group than in the control group (p=0.000). The angle between the clivus and the McRae line (p<0.024), as the angle between the supraocciput and the McRae line (p<0.021), and the angle between the tentorium and a line connecting the internal occipital protuberance to the opisthion (p<0.009) were significantly larger in the CMI group than in the control group. The mean vertical length of the cerebellar hemisphere (p<0.003) and the mean length of the coronal and sagittal superoinferior aspects of the cerebellum (p<0.05) were longer in the CMI group than in the control group, while the mean length of the axial anteroposterior aspect of the cerebellum (p<0.001) was significantly shorter in the CMI group relative to control subjects. Conclusion : We elucidate the transformation of the posterior cranial fossa into the narrow funnel shape. The sufficient cephalocaudal extension of the craniectomy of the posterior cranial fossa has more decompression effect than other type extension of the craniectomy in CMI patients.