• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.82-94
• /
• 2005

This study was undertaken to measure and analyze the thermal environment characteristics of the grey permeable cement concrete pavement(GPCCP), the permeable cement concrete brick pavement(PCCBP) compared with impermeable cement concrete pavement(ICCP) and bare soil(BS) under the summer outdoor environment. Following is a summary of major results. 1) The peak surface temperature was greatest in the GPCCP$(54.2^{\circ}C)$ followed by ICCP$(47.2^{\circ}C)$ rut August 2, 2002, the hottest day$(35.3^{\circ}C\;of\;highest\;temperature)$ during the experiment; peak temperature in the ICCP and BS were $45.5^{\circ}C)$ and $45.3^{\circ}C)$ respectively. 2) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the ICCP and that this was mainly due to a low albedo in the former(0.2) relative to that of the latter(0.4). 3) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the PCCBP, BS and that this was mainly due to a decreased latent heat resulting from a time dependent decreasing impact of rainfall. 4) It is necessary to make cool pavements to further studies on light-colored surface materials for attaining high albdo and construction methods which can enhance the latent heat through the continuous evaporation from pavements surface. 5) Vertical arrangement of pavement layers has not been considered in the present study, which has been focuses on the heat characteristics of the surface layer materials. Accordingly, future studies will have to be empasized on pavement methods including the vertical arrangement of the pavement layers.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.747-756
• /
• 2010

This study is on the spatial composition of accommodation area in accommodation barge. The accommodation barge which is used as living facilities for offshore plants' workers can be classified into Accommodation Work Barge, Accommodation Pipe Lay Barge and Multi-purpose Accommodation Barge. We study on the spatial composition of accommodation area in Accommodation Work Barge, most frequently used, through analyzing G.A drawings of the barges. The spatial composition has great influences into the convenience and amenity for workers' daily life in the accommodation area of accommodation barge. The spatial composition of accommodation area shows many characteristics not in horizontal arrangement on any deck but in vertical space arrangement on layers of decks. The particular types of vertical space composition can be classified into 'Centralized Type' and 'Dispersive Type'. These two types will be the basis of space planning for new accommodation barge.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.1
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.53-57
• /
• 2009

The Oriental flower arrangements have the beauty of a strict triangle in a symmetrical three-dimensional effect as the form of flower tribute to gods in ancient times and used frogs to fix flowers to a basin easily. Flower arrangements of a conical shape made by repeatedly piled flowers in ancient Egypt shows the origin of the present vertical form of the Western flower arrangements. Flower arrangements in ancient Greece formed in a smooth S shape, while Roman flower arrangements were rich and gorgeous in a lowering and thin shape horizontally. Persians were showing triangular forms similar to the Oriental three-dimensional effect. The basic form of flower arrangements in the age of Renaissance was also created upon the ancient one, descending to Art Nouveau when flower arrangements were widely expressed from mass to space aesthetics led by America in the 20th century influenced by mild color, simplicity and realistic description of the Oriental art in the late 19th century. The Western flower arrangements are focused on formation, same as the Oriental ones, yet they disregard naturality and based on practicality.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.193-200
• /
• 2012

The purpose of this study was to investigate the consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width. The experimental materials developed for this study were a set of stimuli and necktie sensibility scales. The stimuli were 27 color pictures, in which the necktie width(narrow, medium, wide), stripe arrangement(horizontal, vertical, oblique), and stripe area-ratio(1:1, 1:2, 1:3) were manipulated. The 7-point scale was used for the consumere sensibility. Data were obtained from 270 men and women in their 20s and 30s living in Seoul, Gwangju, Daegu, Jinju, and Changwon on November 2011. For the data analysis, ANOVA and Duncan-test were used by using SPSS program. Results of this study were as follows.; The factors of consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width consisted of five dimensions of attractiveness, grace, individuality, ability, and activity. The necktie width showed an independent effect on attractiveness and grace. The stripe arrangement showed an independent effect on attractiveness, grace, individuality, and ability. The stripe area-ratio showed an independent effect on grace. Also, interaction effects of the necktie width and stripe area-ratio on ability were found. The study results are highly expected to be used as valuable sources in plans for necktie products.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.83-94
• /
• 2010

Conventionally, ornament has developed around linear thinking based on Euclidean geometry, and been explained as simple and lucid natural Euclidean geometrical phenomena. The modular arrangement with vertical, horizontal and diagonal grids has been an organizing principle of classical ornament, but in digital era ornament is found not to be explained only with the principle of traditional arrangement due to the seemingly irregular complex forms. In that sense, this study presents the concept of digital ornament and examined the backgrounds of ornament in digital age, that are complex system and non-Euclidean geometry. Accordingly, the present study takes an approach by dividing new formal types of ornament into algorithmic form, hybrid form and dynamic form to find out a principle of pattern organization. Lately, architects who actively use computer for their architectural designs take the algorithmic strategies in nature and create various and complex patterns by simple rules. The patterns are not the repetition of the same, but the production of singularities. In addition, hybrid form by morphing shows a topologically flexible evolutionary transformation, and is used to create in-between transitional shapes from the source to target. Finally, the patterns by the interaction between the system components which are corresponded to the embedded forces emerge from dynamic simulation of the natural environment. Rather than objects itself, focus is given to the process of generating forms, and the ornamental patterns as the revelation of such implicit order provide not just the formal beauty but also spatial pathways for lights and air, maximizing the effects of lights.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.97-105
• /
• 2017

This study is the realization study recognizing the Korean gothic printing letter. This study defined the new grapheme by using the connection ingredient and had the graphemes recognized by means of the feature dots of the isolated dot, end dot, 2-line gathering dots, more than 3 lines gathering dots, and classified the characters by means of the arrangement information of the graphemes and the layers that the graphemes form within the characters, and made the character database for the recognition by using them. The layers and the arrangement information of the graphemes consisting in the characters were presumed by using the weight center position information of the graphemes extracted from the characters to recognize and the information of the graphemes obtained by vertically exploring from the weight center of each grapheme, and it recognized the characters by judging and comparing the character groups of the database by means of the information which was secured this way. 350 characters were used for the character recognition test and about 97% recognition result was obtained by recognizing 338 characters.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.729-737
• /
• 2017

The measurement accuracy of Tunable Diode Laser Absorption Spectroscopy based Tomography (TDLAST) for the temperature and concentration fields are dependant upon the arrangement method of the used laser beams. This paper reports on the optimization of laser beam arrangements using phantom data. It has been verified that the measurement error of the TDLAST decreased with increase of laser beam numbers. Further, it has been confirmed that perpendicular arrangements between the horizontal and the vertical laser beams without additional diagonal laser beams shows the minimum measurement errors.

• Journal of Environmental Science International
• /
• v.29 no.9
• /
• pp.907-914
• /
• 2020

In this study, the two-stage electroflotation-rising process was investigated with the aim of improving the performance of the conventional one-stage electroflotation process. A total of 32 min (the electroflotation and rising times were 30 min and 2 min, respectively,) was required when a current of 0.35 A was applied in the one-stage electroflotation-rising experiment. The amount of electric power required to treat 1 ㎥ of water was 1.75 kWh/㎥. For the two- stage system, the time required to achieve a turbidity removal rate of over 95% was 16 min (50% of the one-stage system). The amount of electric power required to treat 1 ㎥ of water was 0.59 kWh/㎥, which was only 33.7% of that required for the one-stage process. The total treatment time and electric power were excellent in case of the two-stage system in comparison with those of the one-stage process. The rate of turbidity removal for the horizontal electrode arrangement is 9.3% higher than that of vertical electrode arrangement. When Na₂SO₄ was used as the electrolyte, the optimum electrolyte concentration was 1.0 g/L.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.82-87
• /
• 2012

In this paper, flashover characteristics of air in the vertical arrangement of cylinder-shaped rod and plane gap in the case of combustion flame on the plane electrode were examined under the application of a.c. and d.c. high-voltages. In order to investigate the effect of propane flame on the flashover characteristics of air, flashover voltages in accordance with the variation of the gap length and the horizontal distance between the flame and the high-voltage rod electrode were measured. As the result of the experiment, flashover voltages in the presence of the flame were substantially lowered than those in the absence of flame, and the polarity effects with the d.c. voltages on appeared owing to the flame. Flashover voltages of air were increased in the proportion of the gap length and the horizontal distance in the case of both a.c. and d.c. voltages, but the flame was extinguished by such corona wind that was produced from the rod electrode when the gap length and the horizontal distance reached to a certain degree.