• 한국전자파학회논문지
• /
• 제27권7호
• /
• pp.620-624
• /
• 2016

본 논문은 AM 변조 신호를 전송하기 위한 전류모드논리 주파수 분할기를 설계하고, 모의실험 결과를 통해 입출력 파형과 bias 포인트의 변화에 따른 출력 전압을 분석하였다. 또한, 입력 주파수 1,400 MHz에서 최적화되어 동작하는 주파수 분할기를 설계하였으며, 이를 통해 700 MHz 변조 신호의 전송 가능성을 확인하였다. 설계된 주파수 분할기는 100 MHz부터 3,000 MHz까지 동작하며, 2,900 MHz의 대역폭을 가지고 입력 주파수 1,400 MHz에서 -33 dBm의 입력 전력으로 변환 이득 14 dB를 갖도록 설계되었다. DC 전압 $V_{DD}=3V$에서 입력 전압 $V_{Peak}=0.2V$일 때 $I_{total}=30mA$가 흐르며, 변조 지수 m=0.5인 진폭 변조 신호의 반송파 주파수가 1,400 MHz에서 700 MHz로 분주되는 것을 확인하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권7호
• /
• pp.3253-3258
• /
• 2012

Objective: To evaluate the efficacy and safety of whole brain radiotherapy (WBRT) plus chemotherapy versus WBRT alone for treating brain metastases (BM) from lung cancer by performing a meta-analysis based on randomized controlled trials (RCTs). Methods: The PubMed, Embase, CENTRAL, ASCO, ESMO, CBM, CNKI, and VIP databases were searched for relevant RCTs performed between January 2000 and March 2012. After quality assessment and data extraction, the meta-analysis was performed using the RevMan 5.1 software, with funnel plot evaluation of publication bias. Results: 19 RCTs involving 1,343 patients were included. The meta-analyses demonstrated that compared to WBRT alone, WBRT plus chemotherapy was more effective with regard to the objective response rate (OR = 2.30, 95% CI = 1.79 - 2.98; P < 0.001); however, the incidences of gastrointestinal reactions (RR = 3.82, 95% CI = 2.33 - 6.28, P <0.001), bone marrow suppression (RR = 5.49, 95% CI = 3.65 - 8.25, P < 0.001), thrombocytopenia (RR = 5.83, 95% CI = 0.39 - 86.59; P = 0.20), leukopenia (RR = 3.13, 95% CI = 1.77 - 5.51; P < 0.001), and neutropenia (RR = 2.75, 95% CI = 1.61 - 4.68; P < 0.001) in patients treated with WBRT plus chemotherapy were higher than with WBRT alone. There was no obvious publication bias detected. Conclusion: WBRT plus chemotherapy can obviously improve total efficacy rate, butalso increases the incidence of adverse reactions compared to WBRT alone. From the limitations of this study, more large-scale, high-quality RCTs are suggested for further verification.

• 한국항공우주학회지
• /
• 제39권2호
• /
• pp.162-169
• /
• 2011

현대의 고성능 전투기는 공력성능 및 조종성능의 향상을 위하여 대부분 세로축 방향으로 항공기를 불안정하게 설계하는 정안정성 완화 개념을 채택하고 있다. 항공기는 비행제어법칙에 필요한 피치, 롤, 요우각속도, 수직가속도와 같은 항공기 상태정보를 각속도(RSA: Rate Sensor Assembly)와 가속도센서(ASA: Acceleration Sensor Assembly)로부터 획득한다. 항공기에 적용되는 센서는 항공기의 안전을 보장하는 최소한의 허용 가능한 측정 오차를 갖지만, 잡음, 오프셋 등과 같은 허용 범위내의 오차로 인하여 원하지 않는 항공기 운동을 발생시킨다. 비행시험 결과, ASA의 허용 범위내의 측정 오차는 1g 수평비행시에 원하지 않는 기수 숙임 현상을 일으켰다. 본 논문에서는 이러한 오차로 인하여 발생하는 기수 숙임 현상을 개선하기 위해 1g 수평비행 조건에 피치자세각 궤환을 세로축 제어법칙에 적용하였다. 비행시험 결과, 피차자세각 궤환은 1g 수평 비행 시에 기수 숙임현상을 제거하고 항공기의 기본적인 안정성에는 영향을 미치지 않는다는 것을 확인할 수 있었다.

• 한국항행학회논문지
• /
• 제20권1호
• /
• pp.23-28
• /
• 2016

본 논문에서는 한반도 지역에서 SBAS (satellite based augmentation system) 대류층 지연 보정 모델의 정확도 성능을 검증하였다. 정확도 분석을 위한 대류층 지연량 참값으로 IGS (International GNSS Service)에서 제공하는 정밀 대류층 천정 지연량인 ZPD(zenith path delay) 데이터를 활용하였다. 그리고 대표적인 대류층 지연 모델인 Saastamoinen 모델 및 Hopfield 모델과 성능을 비교하였다. 그 결과 SBAS 대류층 지연 보정 모델의 잔여 오차는 약 50 mm 수준으로, Saastamoinen 모델 및 Hopfield 모델보다 성능이 떨어졌다. 이 대류층 지연 모델에 의한 잔여오차는 SBAS 정확도 요구조건에는 문제가 없지만, 사용자 측위 성능에는 영향을 미칠 수 있다. 만약 한반도 기상 환경에 적합하도록 SBAS 대류층 보정 모델의 기상 파라미터를 수정한다면, 더 좋은 성능의 SBAS 서비스를 한반도에 제공할 수 있을 것으로 기대된다.

• 농촌계획
• /
• 제21권4호
• /
• pp.177-186
• /
• 2015

The main objective of this study was to assess the applicability of IoT (Internet of Things)-based flood management under climate change by developing intelligent water level monitoring platform based on IoT. In this study, Arduino Uno was selected as the development board, which is an open-source electronic platform. Arduino Uno was designed to connect the ultrasonic sensor, temperature sensor, and data logger shield for implementing IoT. Arduino IDE (Integrated Development Environment) was selected as the Arduino software and used to develop the intelligent algorithm to measure and calibrate the real-time water level automatically. The intelligent water level monitoring platform consists of water level measurement, temperature calibration, data calibration, stage-discharge relationship, and data logger algorithms. Water level measurement and temperature calibration algorithm corrected the bias inherent in the ultrasonic sensor. Data calibration algorithm analyzed and corrected the outliers during the measurement process. The verification of the intelligent water level measurement algorithm was performed by comparing water levels using the tape and ultrasonic sensor, which was generated by measuring water levels at regular intervals up to the maximum level. The statistics of the slope of the regression line and $R^2$ were 1.00 and 0.99, respectively which were considered acceptable. The error was 0.0575 cm. The verification of data calibration algorithm was performed by analyzing water levels containing all error codes in a time series graph. The intelligent platform developed in this study may contribute to the public IoT service, which is applicable to intelligent flood management under climate change.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1149-1154
• /
• 2010

Liquid chromatography/mass spectrometry using isotope dilution method has been established as a primary method for the measurement of cortisol in human serum. Verification of this method was accomplished by the participation in Consultative Committee for Amount of Substance-Metrology in Chemistry (CCQM) pilot study. Two levels of cortisol certified reference materials were prepared and certified by the established method. They were used as sample materials for the proficiency testing. The expanded uncertainty in the measurement of cortisol in human serum was approximately 1.2% at 95% confidence level. The results of the proficiency testing showed a good precision among the participants, but some bias to the certified values. This means that commercial field laboratories should keep traceability chain to SI unit through available reference measurement procedures and/or available reference materials.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.772-777
• /
• 2003

A vision-based tool position estimation system for the inspection and maintenance manipulator working inside the steam generator bowl of nuclear power plants can help human operators ensure that the inspection probe or plug are inserted to the targeted tube. Some previous research proposed a simplified tube position verification system that counts the tubes passed through during the motion and displays only the position of the tool. In this paper, by using a general camera calibration approach, tool orientation is also estimated. In order to reduce the computation time and avoid the parameter bias problem in an ellipse fitting, a small number of edge points are collected around the large section of the ellipse boundary. Experiment results show that the camera calibration parameters, detected ellipses, and estimated tool position are appropriate.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.79-85
• /
• 2015

Existing Differential GPS (DGPS) pseudorange correction (PRC) generation techniques based on a virtual reference station cannot effectively assign a weighting factor if the baseline distance between a user and a reference station is not long enough. In this study, a virtual reference station DGPS PRC generation technique was developed based on an enhanced inverse distance weighting method using an exponential function that can maximize a small baseline distance difference due to the dense arrangement of DGPS reference stations in South Korea, and its positioning performance was validated. For the performance verification, the performance of the model developed in this study (EIDW) was compared with those of typical inverse distance weighting (IDW), first- and second-order multiple linear regression analyses (Planar 1 and 2), the model of Abousalem (1996) (Ab_EXP), and the model of Kim (2013) (Kim_EXP). The model developed in the present study had a horizontal accuracy of 53 cm, and the positioning based on the second-order multiple linear regression analysis that showed the highest positioning accuracy among the existing models had a horizontal accuracy of 51 cm, indicating that they have similar levels of performance. Also, when positioning was performed using five reference stations, the horizontal accuracy of the developed model improved by 8 ~ 42% compared to those of the existing models. In particular, the bias was improved by up to 27 cm.

• 한국멀티미디어학회논문지
• /
• 제21권3호
• /
• pp.369-381
• /
• 2018

Nowadays a personalization algorithm is gaining huge attention. It gives users selective information which is helpful and interesting in a deluge of information based on their past behavior on the internet. However there is also a fatal side effect that the user can only get restricted information on restricted topics selected by the algorithm. Basically, the personalization algorithm makes users have a narrower perspective and even stronger bias because users have less chances to get views of opponent. Eli Pariser called this problem the 'filter bubble' in his book. It is important to understand exactly what a filter bubble is to solve the problem. Therefore, this paper shows how much Google's personalized search algorithm influences search result through an experiment with deep neural networks acting like users. At the beginning of the experiment, two Google accounts are newly created, not to be influenced by the Google's personalized search algorithm. Then the two pure accounts get politically biased by two methods. We periodically calculate the numerical score depending on the character of links and it shows how biased the account is. In conclusion, this paper shows the formation process of filter bubble by a personalization algorithm through the experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.930-933
• /
• 2005

Non-destructive inspection techniques using laser have been breading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics. computer and image processing The ESPI technique is already on the stage of on-line testing with commercial products in developed country nations. Especially, this technique is expected to be applied to the nuclear industry, automobile and aerospace because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringes for identifying mode shapes are displayed. A bias vibration is introduced into the reference beam to shift the Jo fringes so that fringe shift algorithms can be used to determine vibration amplitude. Using this method. amplitude fields for vibrating objects were obtained directly from the time-average interferometer recorded by the ESPI system.