• 제목/요약/키워드: Verification and validation

검색결과 563건 처리시간 0.028초

임상보고 가능범위의 실증적 연구 (An Empirical Study of the Clinically Reportable Range in Clinical Chemistry)

  • 장상우;이상곤;최호성;송은영;박용원;이인애
    • 대한임상검사과학회지
    • /
    • 제39권1호
    • /
    • pp.31-36
    • /
    • 2007
  • The purpose of the clinically reportable range (CRR) in clinical chemistry is to estimate linearity in working range. The reportable range includes all results that may be reliably reported, and embraces two types of ranges: the analytical measurement range (AMR) is the range of analyte values that a method can directly measure on the specimen without any dilution, concentration, or other pretreatment not part of the usual assay process. CAP and JCAHO require linearity on analyzers every six months. The clinically reportable range is the range of analyte values that a method can measure, allowing for specimen dilution, concentration, or other pretreatment used to extend the direct analytical measurement range. The AMR cannot exceed the manufacturer's limits. Establishing AMR is easily accomplished with Calibration Verification Assessment and experimental Linearity. For example: The manufacturer states that the limits of the AST on their instrument are 0-1100. The lowest level that could be verified is 2. The upper level is 1241. The verified AMR of the instrument is 2-1241. The lower limit of the range is 2, because that is the lowest level that could be verified by the laboratory. The laboratory could not use the manufacturer's lower limit of 2 because they have not proven that the instrument values below 2 are valid. The upper limit of the range is 1241, because although the lab has shown that the instrument is linear to 1241, the manufacturer does not make that claim. The laboratory needs to demonstrate the accuracy and precision of the analyzer, as well the validation of the patient AMR. Linearity requirements have been eliminated from the CLIA regulations and from the CAP inspection criteria, however, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. If a lab chooses to continue linearity studies, these studies must fully comply with the calibration/calibration verification requirements of CLIA and/or CAP. The results of lower limit and upper limit of clinically reportable range were total protein (2.1 - 79.9), albumin (1.3 - 39), total bilirubin (0.2 - 106.2), alkaline phosphatase (13 - 6928.2), aspartate aminotransferase (24 - 7446), alanine aminotransferase (13 - 6724.2), gamma glutamyl transpeptidase (16.64 - 9904.2), creatine kinase (15.26 - 4723.8), lactate dehydrogenase (127.66 - 13231.8), creatinine (0.4 - 129.6), blood urea nitrogen (8.67 - 925.8), uric acid (1.6 - 151.2), total cholesterol (48.52 - 3162), triglycerides (36.91 - 3367.8), glucose (31 - 4218), amylase (21 - 6694.2), calcium (3.1 - 118.2), inorganic phosphorus (1.11 - 108), HDL (11.74 - 666), NA (58.3 - 1800), K (1.0 - 69.6), CL (38 - 1230).

  • PDF

거래비용접근방법 불확실성요인과 거래관계성이 채널 충성도에 미치는 영향에 관한 연구 (The Influence of Transaction Cost Approach Factor on Channel Loyalty)

  • 이지은
    • 경영과정보연구
    • /
    • 제33권2호
    • /
    • pp.281-299
    • /
    • 2014
  • 소비의 득실에 따라 구매를 결정하는 구매자성향을 고려하여 본 연구는 채널충성도를 설명하기 위해서 거래비용이론의 불확실성을 검토하고 적용하였으며 거래빈도와 신뢰를 통하여 채널과 소비자와의 관계를 입증함으로써 유통채널구조에 대한 폭넓은 이해를 제공하고자 하였다. 채널충성도를 검증함에 있어서 거래비용접근방법(transaction cost approach) 요인을 고려하여 입증하였다. 채널충성도를 설명하기 위해서 거래비용접근방법 요인 중 불확실성을 검토하고 적용하였으며 거래빈도와 신뢰를 통하여 유통채널과 소비자와의 관계를 입증함으로써 유통채널구조에 대한 폭넓은 이해를 제공하고자 하였다. 연구결과를 바탕으로 유통채널상에서 채널관리전략을 수립하는 기업들에게 실무적 시사점을 제공하고자 한다.

  • PDF

D-정책을 갖는 이산시간 BMAP/G/1 대기행렬의 대기시간 분석 (Waiting Time Analysis of Discrete-Time BMAP/G/1 Queue Under D-policy)

  • 이세원
    • 한국산업정보학회논문지
    • /
    • 제23권1호
    • /
    • pp.53-63
    • /
    • 2018
  • 본 논문에서는 D-정책을 갖는 이산시간 BMAP/G/1 대기행렬시스템의 대기시간을 분석한다. 고객(또는 패킷)들은 마코비안 도착과정을 따라 집단으로 시스템에 도착하며, 유휴한 서버는 시스템에 도착한 고객집단의 서비스시간의 총합이 이미 정해놓은 임계값 D를 초과하면 시스템에 더 이상 서비스할 고객이 없을 때까지 서비스를 제공한다. 시스템의 안정상태 대기시간 분포를 변환 형태로 구하고 성능척도로서 평균값을 유도하였다. 시뮬레이션을 통하여 이론값들의 타당성을 검증하고 간단한 수치예제를 보였다.

IMPROVING THE ESP ACCURACY WITH COMBINATION OF PROBABILISTIC FORECASTS

  • Yu, Seung-Oh;Kim, Young-Oh
    • Water Engineering Research
    • /
    • 제5권2호
    • /
    • pp.101-109
    • /
    • 2004
  • Aggregating information by combining forecasts from two or more forecasting methods is an alternative to using forecasts from just a single method to improve forecast accuracy. This paper describes the development and use of a monthly inflow forecast model based on an optimal linear combination (OLC) of forecasts derived from naive, persistence, and Ensemble Streamflow Prediction (ESP) forecasts. Using the cross-validation technique, the OLC model made 1-month ahead probabilistic forecasts for the Chungju multi-purpose dam inflows for 15 years. For most of the verification months, the skill associated with the OLC forecast was superior to those drawn from the individual forecast techniques. Therefore this study demonstrates that OLC can improve the accuracy of the ESP forecast, especially during the dry season. This study also examined the value of the OLC forecasts in reservoir operations. Stochastic Dynamic Programming (SDP) derived the optimal operating policy for the Chungju multi-purpose dam operation and the derived policy was simulated using the 15-year observed inflows. The simulation results showed the SDP model that updated its probability from the new OLC forecast provided more efficient operation decisions than the conventional SDP model.

  • PDF

초등학생을 위한 유한상태 오토마타 교육자료 개발 (Development of Finite State Automata Learning Materials for Elementary School Students)

  • 고형철;김종우
    • 정보교육학회논문지
    • /
    • 제20권4호
    • /
    • pp.401-408
    • /
    • 2016
  • 언플러그드교육은 초등학교에서 실시하려는 SW교육의 주된 요소로 제시되고 있다. 이 자료는 Timbell 외 2가 제작한 컴퓨터과학에 대한 여러 가지 주제별로 자료를 제시하고 있다. 이들 중에 유한상태 오토마타 교육은 우리의 실정에 적합한 교수법과 교육자료의 개발이 필요하다. 본 연구에서는 이 주제와 관련된 선행 연구를 바탕으로 초등 고학년의 발달단계에 적합한 자료를 개발하였다. 학습모형은 학습자의 자기주도적 활동중심학습으로 구성하였으며, 제시된 교육자료와 교수법은 전문가 집단의 검증과 실험집단의 분석을 통해 적절하다는 결론을 얻었다.

발사환경시험을 이용한 통신방송위성 Ku대역 중계기 패널의 모델 검증 (Model Validation for the CBS Ku-Band Transponder Panel Using Launch Environmental Test)

  • 서현석;최장섭;박종흥;우형제
    • 대한기계학회논문집A
    • /
    • 제29권3호
    • /
    • pp.387-394
    • /
    • 2005
  • Accurate predictions and simulations of the behavior of space structures based on analytical models become more important. In order to perform analysis to support the design of Ku-band transponder panel for the Communications and Broadcasting Satellite(CBS), mathematical models of the panel were generated in the form of finite element models. Test verification of these models is required before the transponder panel can be certified for launch environments. A modal identification was performed to obtain modal parameters which can be compared with the test results using correlation techniques. This paper approaches the sensor placement from the standpoint of the structural dynamicist who uses the modal parameter obtained during launch environmental test. The models were validated by performing a test-analysis correlation and updating analysis. It was proved that the Ku-band transponder panel satisfies the environmental test requirements.

비접촉 전압위상 검출 기술을 이용한 무정전 절연저항 측정 방법에 관한 연구 (A Study on Measurement Technique of Insulation Resistance for Non-interrupting Inspection Using Non-contact Voltage Phase Detection Technology)

  • 이기연;문현욱;김동우;임용배;최동환;김용혁
    • 전기학회논문지
    • /
    • 제67권8호
    • /
    • pp.1106-1112
    • /
    • 2018
  • In this paper, measurement techniques are presented to test the performance of insulation without interruption if it is difficult to measure insulation resistance. Especially, non-contact voltage phase detection techniques have been developed that can be applied in environments where it is difficult to find voltage measurement locations such as component receptors. The performance verification of the non-interrupting insulation resistance measuring devices has been tested against existing products using standard calibration equipment and test jigs. The validation confirmed performance within 2 % for direct contact type and within 10 % for non-contact type. In addition, the procedure to make continuous insulation test using the equipment was proposed.

비행시험 데이터를 통한 추진제탱크 가압가스 요구량 예측 프로그램 검증 (Verification of Required Pressurant Mass Prediction Program for Propellant Tank through Flight Test Data)

  • 권오성;한상엽;조인현;고영성
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.723-725
    • /
    • 2010
  • 추진제탱크의 가압에 소요되는 가압가스 요구량을 예측하기 위해 개발된 프로그램을 비행시험 데이터를 통해 검증하였다. 개발된 예측 프로그램은 이미 지상에서의 시험데이터를 통해 검증되었으나, 프로그램의 신뢰성을 높이기 위하여 2002년 발사된 3단형과학로켓(KSR-III)의 비행시험 데이터와 비교하였다. 비행시험에서는 추진제탱크로 유입되는 가압가스의 온도를 측정하지 않았으므로 데이터 분석을 통하여 적절한 온도를 가정하였다. 수치해석 프로그램과 비행시험 데이터 비교 결과 가압가스 요구량에 있어 약 6%의 오차를 보여줌으로써 예측 프로그램의 유효성을 입증하였다.

  • PDF

지뢰지대 밀도별 접촉확률 산정 모델링 방안 (Modeling Scheme for Calculating Encounter Probability Versus Minefleld Density)

  • 백두현;이상헌
    • 한국국방경영분석학회지
    • /
    • 제35권2호
    • /
    • pp.77-86
    • /
    • 2009
  • 접촉확률그래프는 한 대의 차량이 지뢰지대를 임의로 통과할 때 한 발의 지뢰가 폭발될 수 있는 확률을 측정한 그래프이다. 이 지뢰지대 밀도별 접촉확률 그래프는 한국 및 미(美) 육군의 야전교범에 제시되어 있으나 실 기동에 의한 데이터인지 워게임에 의한 결과치 인지 근거가 없는 실정이다. 본 논문에서는 신뢰할 만한 자료로서 근거가 없는 접촉확률 그래프를 컴퓨터 프로그램으로 절차식 모델을 구축하여 증명한다. 구축한 프로그램으로 산출된 결과치는 접촉확률그래프에 제시된 값과 거의 유사하게 나타낸다. 따라서 본 연구에서 제시한 절차식 모델은 모델링이 요구하는 타당성 및 모델자체의 검증에 있어 충분한 조건을 갖추었으며 다수 차량의 접촉확률을 계산하는데 있어서 매우 유용하다.

국내 전파자원 수요예측 모형 (A Model for the Forecasting Methodology of Radio Spectrum Demand)

  • 장희선;신현철;김한주
    • 한국컴퓨터정보학회논문지
    • /
    • 제7권1호
    • /
    • pp.94-102
    • /
    • 2002
  • 본 논문에서는 국내 전파자원 관리를 위한 전파자원의 중장기 수요예측 방법론 개발의 전 단계로서 전파자원, 즉 주파수의 수요예측 방법론을 제시한다. 특히, 기존 공급자 위주의 하향식(Top-down) 개념의 수요예측 방법론이 아니라 무선자원을 실질적으로 소비하는 사용자를 중심으로 하는 상향식(Bottom-up) 개념의 주파수 수요예측 모형을 제시한다. 이는 크게 서비스 정의, 서비스 특성 분류, 서비스별 대표 속성 도출, 서비스 수요예측, 전파자원과의 매핑 검증 및 주파수 수요예측의 7단계로 이루어지며 각 단계에서 수행하여야 할 주요 업무를 설명한다. 아울러 PCS개인통신환경에서의 주파수 소요량 산출 예를 제시함으로서 개발된 모형의 타당성을 입증한다.

  • PDF