• 한국군사과학기술학회지
• /
• 제26권3호
• /
• pp.214-226
• /
• 2023

A transfer alignment is used to initialize, align, and calibrate a SINS(Slave INS) using a MINS(Master INS) in motion. This paper presents an airborne transfer alignment with velocity and azimuth matching to estimate inertial sensor biases under the wing flexure influence. This study also considers the lever arm, time delay and relative orientation between MINS and SINS. The traditional transfer alignment only uses velocity matching. In contrast, this paper utilizes the azimuth matching to prevent divergence of the azimuth when the aircraft is stationary or quasi-stationary since the azimuth is less affected by the wing flexibility. The performance of the proposed Kalman filter is analyzed using two factors; one is the estimation performance of gyroscope and accelerometer bias and the other is comparing aircraft dynamics and attitude covariance. The performance of the proposed filter is verified using a long term flight test. The test results show that the proposed scheme can be effectively applied to various platforms that require airborne transfer alignment.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.238-243
• /
• 1997

A new transfer alignment algorithm using the velocity and the quaternion partial matching methods is proposed to reduce the effect of a ship's Y-axis flexure on the performance of azimuth error estimation of Kalman filter. The simulation results show that it can significantly reduce the effect of Y-axis flexure on error estimation by the transfer alignment algorithm. As its results, azimuth transfer alignment error is reached up to 3 mrad under proper roll and pitch attitude motion of the ship.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.369-373
• /
• 2001

This paper is concerned with a transfer alignment of SDINS under ship motions. To reduce alignment errors induced by the ship body flexure, an error compensation method is suggested based on velocity and DCM partial matching, and by interpreting the simulation results and comparing with the conventional velocity and quaternion partial matching, it is shown that the proposed method is effective enough to improve the azimuth alignment performance.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.225-233
• /
• 2001

This paper deals with the transfer alignment problem of SDINS(StrapDown Inertial Navigation System) subjected to roll and pitch motions of the ship. Specifically, to reduce alignment errors induced by measurement time-delay and ship body flexure, an error compensation method is suggested based on delay state augmentation and DCM(Direction Cosine Matrix) partial matching. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then DCM partial matching is properly combined to reduce effects of a ship's Y axis flexure. The simulation results show that the suggested method is effective enough resulting in considerably less azimuth alignment errors.

• 제어로봇시스템학회논문지
• /
• 제8권2호
• /
• pp.178-184
• /
• 2002

This paper deals with the transfer alignment problem of SDINS(StrapDown Inertial Navigation System) subjected to roll and pitch motions of the ship. In order to reduce alignment errors induced by ship body flexure, a linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to the dominant y axis component and defining the flexure state of random constant type. And then a robust state estimation scheme is introduced to account for modeling uncertainty of the flexure. By interpreting the simulation results and comparing with the velocity and DCM(Direction Cosine Matrix) partial matching method, it is shown that the proposed method is effective enough to improve the azimuth alignment performance.

• 한국항행학회논문지
• /
• 제19권5호
• /
• pp.389-394
• /
• 2015

본 논문에서는 관성항법시스템의 전달정렬 기법인 속도정합에 대하여 지렛대 거리 오차와 속도 측정치의 시간 지연을 고려하였고, 시스템 레벨에서 성능을 향상시키기 위한 방법을 제안하였다. 먼저 확장형 칼만필터의 공정잡음과 측정잡음의 공분산 값에 따른 추정 성능을 분석하였다. 그리고 가관측성 분석을 통하여 방위각 자세 오차의 추정 성능을 향상시키기 위한 항체의 운항 조건을 제시하였고 시뮬레이션을 통하여 성능을 분석하였다. 방위각 자세 오차를 추정하기 위한 항체의 운항 조건을 분석하였는데 항체가 순항을 하는 경우에는 방위각 자세 오차를 추정하지 못하며 북측 혹은 동측 가속도가 있어야만 추정이 됨을 알 수 있었다.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.708-715
• /
• 2010

In Strapdown Inertial Navigation System, alignment accuracy is the most important factor to determine the performance of navigation. However by an existing self-alignment method, it takes a long time to acquire the alignment accuracy that we want. So, to attain the desired alignment accuracy in as little as $\bigcirc$ minutes, we have developed the precise multi-position alignment method. In this paper, it is proposed a inertial measurement matching transfer alignment method among alignment methods to minimize the alignment error in a short time. It is based on a mixed velocity-DCM matching method be suitable to the operating environment of vertical launching system. The compensation methods to reduce misalign error, especially azimuth angle error incurred by measurement time-delay error and body flexure error are analyzed and evaluated with simulation. This simulation results are finally confirmed by experimentations using FMS(Flight Motion Simulator) in Lab and the integration test to follow the fire control mission.