A seismic strengthening method using Velcro is proposed to improve the seismic performance of columns in RC frame structures. The proposed method was evaluated experimentally using three fabricated RC specimens. Velcro was wrapped around the columns of the RC-frame specimen to prevent concrete spall falling. The reinforcing performance of the Velcro was determined from comparison of results on seismic performance (i.e., strength, displacement, failure mode, displacement ductility capacity and amount of dissipated energy). As the displacement of the reinforced specimens was increased, the amount of dissipated energy increased drastically, and the displacement-ductility-capacity of the reinforced specimens also increased. The final failure mode of RC frame structure was changed. As a result, it was concluded that the proposed seismic strengthening method using Velcro could be used to increase the displacement ductility of RC columns, and could be used to change the final failure mode of RC-frame structures.
최근 전 세계적으로 지진이 빈번하게 발생하면서 지진으로부터 철근콘크리트 시설물의 내진설계 및 내진보강에 대한 연구가 활발히 진행되고 있다. 특히 철근콘크리트 구조물의 압축부재인 기둥은 지진에 의한 횡력에 취약하여, 적절한 내진보강공법이 필요하다. 따라서 본 연구에서는 시공이 빠르고 간편한 벨크로 내진보강재를 개발하고자 하였다. 벨크로 내진보강재 개발을 위해 기존 공업용 벨크로의 부착성능과 인장력을 증가시켰으며, 공업용 벨크로와 개발된 벨크로 내진보강재의 인장성능을 비교하기 위해 직접인장실험을 수행하였다. 또한 공업용 벨크로와 벨크로 보강재로 보강된 RC 기둥의 내진성능을 예측하기 위한 해석연구를 수행하였다. 해석결과를 바탕으로 비내진 RC 기둥의 벨크로 보강재의 보강에 따른 강도와 연성능력에 대하여 검토하였다. 해석결과 공업용 벨크로와 벨크로 보강재로 보강된 비내진 RC기둥의 강도와 연성능력이 모두 증가함을 확인하였으며, 개발된 벨크로 내진보강재의 내진 성능이 공업용 벨크로 보다 크게 나타남을 확인하였다.
다층 구조물의 경우 1층이 연약한 경우 지진 시 1층에 변형이 집중되어 기둥 부재에 심각한 손상이 발생하거나 파괴되어 구조물이 붕괴하는 사례가 발생하게 된다. 국내의 경우 포항지진 당시 필로티 구조물의 손상사례를 예로 들 수 있다. 2016년 국립재난 안전연구원의 "국내 비내진 건축물의 내진보강공법 조사 및 소요비용 분석 연구"에 따르면 민간 철근콘크리트조 건축물 중 주택의 내진화 비율은 38.3 %고, 그 중 2층 구조물 7.1 %에서 6층 96.3 % 그 외 99.4 %로 2~5층 구조물의 경우 내진비율이 50 %이하로 저조한 것으로 보고하였다. 이에 정부는 지원사업을 통해서 내진화율을 개선코자 하고있으나, 종래의 보강법은 여전히 시공비용이 고가이고 긴급시공이 어려운 단점이 있다. 따라서 본 연구에서는 2014년 국토교통부의 연구사업을 통해서 개발된 저렴하고 긴급시공이 가능한 벨크로를 사용한 내진보강법의 성능을 개선하고자 벨크로와 콘크리트 기둥 사이에 고발포의 경질 우레탄 내부 충진을 통해서 벨크로의 초기긴장력을 도입하고, 이를 통해서 콘크리트 구속효과에 따른 벨크로의 연성보강성능 개선을 목표로 이를 평가하기 위한 실험을 수행하였다. 시험체의 최대 연성도를 통한 평가에서 벨크로 내진 보강재의 최대 연성도 증진 효과를 재확인할 수 있었다. 에너지 소산 능력을 통한 평가에서는 VELCRO1 대비 VELCRO2 눈에 띄는 개선을 보인 반면, VELCRO1와 VELCRO2 시험체의 최대 연성도는 큰 차이를 보이지 않았다. 결과적으로 충진재가 사용된 VELCRO2 시험체에서 에너지 소산 능력은 크게 증진되었으나, 최대 연성도 평가에서 최대변위(∆max)의 증가가 크지 않은 것을 확인하였다. 따라서 내부 충진재 재료의 개선과 균일한 충진재 시공을 개선의 필요성이 확인되었다.
From middle of 90's, SCM had emphasized the importance of connection of all companies which participate to a market, and outsourcing has emphasizes the slim structure of companies for pursing cost reduction and service improvement. But outsourcing as '2-1=1' and integration as '1+1=2' not adapt to the advanced market but return to the former state. Besides, it is impossible of subcontractors and logistics companies to execute these strategies which are win-win strategy and outsourcing. So many logistics companies have sharp competition in price recently. Therefore logistics companies have increased the need for a profitable business model and strategy. This paper researches the limitations of logistics market and redefines the role of logistics through the evolution of logistics. Also this paper proposes new role(Logister) and structure(Velcro structure) for not maker-oriented logistics but market-oriented logistics. The introductory case study will help to understand 2 terms(logister and velcro structure).
본 논문에서는 FRP 보강재의 부착방식에 따른 RC보의 휨보강 성능평가에 대하여 연구하였다. 기존의 FRP 휨보강공법은 보강재의 형태에 따라 크게 FRP 쉬트 보강공법과 FRP 플레이트 보강공법으로 분류될 수 있으며, 각 공법은 에폭시의 양생기간동안 쉬트의 들뜸이 발생하지 않도록 주의해야하거나, 앵커설치 등 시공이 복잡하며, 인력이 많이 소요되는 단점이 있다. 이러한 문제점을 개선하기 위하여 본 논문에서는 Velcro형 고정재를 사용하여 FRP 플레이트를 임시 고정하는 보강공법을 제안하였고, 이에 대한 휨보강 성능평가 실험을 실시하였다. 실험은 FRP보강재의 부착방식을 변수로 하여 총 4개 실험체에 대하여 수행하였다. 실험결과 벨크로형 FRP판 보강공법은 타 공법에 비하여 우수한 시공성을 가짐과 동시에 휨내력이나 연성도 면에서도 우수한 보강성능을 확보하고 있는 것으로 나타났다.
손목 보조기(Wrist brace)는 손목 외상 환자들에게 사용이 되고 있다. 최근 맞춤형 손목 보조기를 3D 프린팅 기술을 활용하여 제작하는 많은 연구가 진행되고 있다. 이러한 3D 프린팅 맞춤형 보조기는 개인마다 다른 형태 반영, 통기성 확보 등의 다양한 요소를 반영할 수 있는 장점이 있다. 본 논문에서는 3D 프린팅 맞춤형 손목 보조기 제작 시 고려되어야 하는 벨크로 밴드 숫자와 위치가 보조기에 미치는 스트레스를 분석하였다. 맞춤형 보조기를 위해 CT 영상 기반으로 자동설계 소프트웨어(Reconeasy 3D, Seeann Solution)를 사용하여 뼈, 피부 영역 3D 모델링을 수행하였다. 3D 피부 영역을 기반으로, 각 치료 목적에 맞도록 손목 보조기 디자인을 적용하였다. 그리고, 보조기의 탄성을 위해 TPU 소재를 사용하여 FDM 방식 3D 프린터로 손목 보조기를 제작하였다. 맞춤형 3D 프린팅 손목 보조기의 벨크로 밴드의 숫자와 위치에 따른 효용성 평가를 위해 보조기의 스트레스 분포를 유한요소법(FEM)으로 분석하였다. 본 연구에서 수행한 손목 보조기 유한요소 해석을 통해 보조기의 스트레스 분포를 확인하였고 보조기 제작과 벨크로 밴드의 숫자와 위치를 확인할 수 있었다. 이러한 실험 결과는 환자에게 양질의 치료를 제공하는데 도움이 될 것이다.
Shear properties of geosynthetic/geosynthetic and geosynthetic/soil were evaluated from direct shear tests. The type of geosynthetic is Velcro which is effective for geosynthetic interface and make up for the weakness of sandbag. In this study, the cohesion and the angle of internal friction of each interface was estimated. The test results showed that the cohesion and the angle of internal friction of the geosynthetics depended on the amount of normal stress, the type of the geosynthetics used, and combinations of the geosynthetics and soils. Finally, by comparing the apparent cohesion and the friction angle of the geosynthetics, the applicability to design was identified.
This study is to understand the actual condition of design and material of peanut-shaped diaper with looking at the types and characteristics of baby cloth diapers and domestic peanut-shaped diapers registered in the Patent Office. Furthermore, it is to suggest the basic data for designing more functional and comfortable cloth diapers. Here are the research result on the actual condition of design and material of baby cloth diapers. Firstly, 11 cloth diapers registered in the Patent Office can be divided into panty-shaped and straight line-shaped diapers. There are 7 kinds of panty-shaped cloth diapers which satisfy both the convenience of a disposable diaper and sanitation of a cloth diaper, and 4 kinds of straight line-shaped cloth diapers that minimize the weaknesses of existing cloth diapers. Secondly, domestic peanut-shaped cloth diapers can be divided into peanut-shaped, inserted, winged, velcro-attached diapers. Among 23 kinds of peanut-shaped cloth diapers from 16 companies, there are 12 kinds of peanut-shaped diapers which consist of layers of cloth to make peanut shape. There are 6 kinds of inserted diapers that insert extra diapers or handkerchiefs in between two sheets of cloth diapers and 3 kinds of winged diapers designed to shorten drying time with sawing only one side of several layered sheets. Also, there are 2 kinds of velcro-attached diapers that are removable according to the amount of excreta. Commonly used materials are cotton woven of diamond jacquard and knit of diamond Hole Stitch or Plain Stitch. And for handing the edge of diaper, the method of wrapping up the edge with cotton woven or knit bias is used.
흙채움 마대는 현장의 재료를 사용하여 간편하게 사면 및 제방의 복구나 보강에 사용되고 있다. 이런 흙채움 마대의 전단저항력을 증가시키기 위해 흙채움 마대 상 하면에 벨크로(Velcro)를 부착한 흙채움 마대가 개발되었으며, 벨크로를 부착한 흙채움 마대의 역학적 특성을 분석하기 위해 대형직접전단실험과 원호파괴를 가정한 실내모형실험이 수행되었다. 실제 벨크로가 부착된 마대를 이용해 사면을 설계하기 위해 흙-토목섬유 요소실험을 실시하여 강도정수를 파악하였다. 그리고 사면형성 시 벨크로와 흙채움 마대가 혼재하고 있기 때문에 정확한 파괴면을 알 수 없다. 따라서 실내모형실험을 통해 내적파괴에 대한 거동을 분석하고, 역해석을 통해 설계강도정수를 제안하였다. 흙-토목섬유의 요소실험결과, 벨크로의 부착으로 인해 흙채움 마대 상호간의 전단저항 정수인 내부마찰각과 점착력의 증가가 나타났으며, 특히 내부마찰각보다는 점착력의 뚜렷한 증가가 나타난 것으로 분석되었다. 또한, 실내모형실험 결과, 지지력이 20%이상 증가해 대형장비의 주행성 증가와 시공속도의 증대를 가져올 것으로 판단된다.
This study was aimed to obtain the available information for the clothing constru- ction according to the traits of the cerebral palsied. For this purpose, their abilities of eleven methods seven of fastening performance and seven finger functions were tested and their correlationships were clarified. The results are as follows : 1. The length of time needed to perform each fastening method in descending order is as follows : small button > small snap > culumn button > large button > middle button > large snap > separating zipper > velcro. As the spastic has better function than the athetoid in the performance of all fastening methods, there was a significant difference between the types of handicap and between the handi- capped and the normal, except for velcro fastening style in which there was no significant differ- ence between the types of handicap. 2. In finger functions of the cerebral palsied, according to the types of handicap there was no significant difference among grip, palm fixation and hands coordination, howefer there were significant differences among pulp pinching, lateral pinching, finger rolling and lifting control. As to the correlation between the ability of fastening performance and finger function, there was a high significant correlation between the length of time needed to perform each fastenting and finger function of hands co ordination, and that of finger rolling; and there was a significant correlation between the length of time and pulp pinching, and laternal pinching.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.