• 한국항행학회논문지
• /
• 제15권1호
• /
• pp.130-139
• /
• 2011

본 논문에서는 HIS 칼라모델에서 색상변환을 이용한 자동차 추적 알고리즘을 제안 하였다. 제안된 알고리즘은 도로위에 두 개의 수평가상 데이터 샘플라인을 설치해 놓는다. 차영상은 프레임과 프레임 사이에서 검출하였다. 검출된 자동차의 차영상에서 색상 분포를 이용해서 자동차 동일성 판별과 차선 변경을 검출하였다. 제안된 알고리즘의 효능성을 검토하기 위하여 도로에 주행하는 자동차를 대상으로 두 가상 샘플라인을 통과하는 자동차의 동일성 판별과 차선 변경을 검출하고, 자동차의 속도 측정기와 제안된 방법을 비교한 결과 0.4% 이내임을 보였다.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.15-25
• /
• 2020

This paper presents a longitudinal control algorithm for ensuring takeover time of autonomous vehicle using V2V communication. In the autonomous driving of more than level 3, autonomous systems should control the vehicles by itself partially. However if the driver's intervention is required for functional safety, the driver should take over the control reasonably. Autonomous driving system has to be designed so that drivers can take over the control from autonomous vehicle reasonably for driving safety. In this study, control algorithm considering takeover time has been developed based on computation method of takeover time. Takeover time is analysed by conditions of longitudinal velocity of preceding vehicle in time-velocity plane. In addition, desired clearance is derived based on takeover time. The performance evaluation of the proposed algorithm in this study was conducted using 3D vehicle model with actual driving data in Matlab/Simulink environment. The results of the performance evaluation show that the longitudinal control algorithm can control while securing takeover time reasonably.

• Advances in nano research
• /
• 제13권5호
• /
• pp.465-474
• /
• 2022

Based on the nonlocal strain gradient (NSG) theory and considering the influence of moment of inertia, the governing equations of motion of porous functionally graded (FG) nanoplates with four edges clamped are established; The Galerkin method is applied to eliminate the spatial variables of the partial differential equation, and the partial differential governing equation is transformed into an ordinary differential equation with time variables. By satisfying the boundary conditions and solving the characteristic equation, the dispersion relations of the porous FG strain gradient nanoplates with four edges fixed are obtained. It is found that when the wave number is very small, the influences of nonlocal parameters and strain gradient parameters on the dispersion relation is very small. However, when the wave number is large, it has a great influence on the group velocity and phase velocity. The nonlocal parameter represents the effect of stiffness softening, and the strain gradient parameter represents the effect of stiffness strengthening. In addition, we also study the influence of power law index parameter and porosity on guided wave propagation.

• 한국안전학회지
• /
• 제23권2호
• /
• pp.72-80
• /
• 2008

In a case of an automobile collision, vehicle damage and injury of the driver and the passenger occur. The scale of the collision which is effected by the extent of vehicle damage and the injury of the passenger, depends on the delta-V. Based on the photograph interpretation o the actual case of accidents in the Seoul and the Incheon area, this study measured the depth of crush and calculated the delta-V. Through verifying the correlation of the depth of crush and the change of velocity, relative equation was evaluated and compared with the prior study results to prove that they are almost identical. Thus, the depth of crush can be used as an index of the degree of impact, which can be utilized as the change of velocity to evaluate the level of injury done to the passengers. However, the period of hospitalization and diagnostics claimed by the injured proves to have no correlation with the delta-V and the extent of vehicle damage, this is due to the non-objective way of diagnosis and the anamnesis of the injured. This study established the absolute limit harmlessness and the choosing limit harmlessness, allowing the appraisal for Yes or No of the injury or the harmlessness based on the prior studies. Moreover, utilizing the relative equation formed between the depth of crush and the delta-V, each case of collision was compared and evaluated in comparison to the limit harmlessness to prove that the 90.4% of the so-called 'claiming-to-be-injured' were exaggerating or fabricating.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.106-111
• /
• 2012

Recently the usage of bicycle has increased steeply in Korea owing to traffic culture of well- being. In a car to bicycle accident investigation, the throw distance of bicycle is very important factor for reconstructing of the accident. The variables that influence on the throw distance of bicycle can be classified into the factors of vehicle and bicycle. Simulations and collision tests in actual car to bicycle accident were executed for obtaining throw distance of bicycle. The simulations were done by PC-$CRASH^{TM}$ and for actual crash tests sand bags were used for the behavior of bicyclist instead of dummy. Factors considered were vehicle velocity and the moving angles of bicycle, also the types of bicycle and vehicle were fairy cycle and automobile, respectively. From the results, the throw distances of a head-on tire collision of $0^{\circ}$ direction was longer than that of tire crash test of $45^{\circ}$ direction, and the throw distances of a head -on frame crash test of $90^{\circ}$ direction was longer than that of frame crash test of $45^{\circ}$ direction. In addition restitution coefficient between vehicle and bicycle was estimated as about 0.1 with based on actual crash tests. Finally the increaser vehicle velocity the longer the throw distances of bicycle, and the results of simulation were relatively good agreement to the experimental results.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.773-778
• /
• 2012

A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 16 piezoelectric cantilevers. We fabricated prototypes using a vehicle load transfer mechanism. Applying a vehicle load transfer mechanism rather than directly installing energy harvesters under roads decreases the area of road construction and allows more energy harvesters to be installed on the side of the road. The power generation amount with respect to the vehicular velocity change was assessed by installing the vehicle load transfer mechanism form and underground form. The energy harvester installed in the underground form generated power of 4.52 mJ at the vehicular velocity of 50 km/h. Also, power generation of the energy harvester installed in the vehicle load transfer mechanism form was 48.65 mJ at the vehicular velocity of 50 km/h.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.93-101
• /
• 2013

PURPOSES : The rumble strip installed at the highway near the tollgate has the purpose to reduce the vehicle velocity or prevent sleepiness by awakening people to the danger. These rumble strip has different vibration decibel from the rumble strip shapes, resulting in some fatigue damage to human because a driver suffers from a lot of stress and displeasure. In this connection, the objective of this paper is to analyze the vibration decibel perceived by a driver in the vehicle under some conditions. METHODS : The vibration decibel conveyed from the tire can be analyzed. The frequency analysis methods were used according to DFT (Discrete Fourier Transform) analysis, FFT (Fast Fourier Transform) analysis, CPB (Constant Percentage Bandwidth) analysis. But the frequency analysis method in this paper is the 1/24 OCT(Octave) band analysis because of the convenience of the analysis and the overall vibration amplitude along the frequency. RESULTS : By using the results of the vibration decibel after analyzing the 1/24 OCT band analysis, these results can be compared from some conditions (e.g., rumble strip shape, uniform velocity of a vehicle, road condition, mass of a vehicle). As a result, the numerical values of decibel are not directly proportional to the vehicle velocity. CONCLUSIONS : At the condition that a vehicle is passing by the rumble strip, the value of a vibration decibel at the rumble strip of the cylinder shape is smaller than the rumble strip of rectangular shape regardless of the rumble strip depth and width. At the mass condition, the more a vehicle is massive, the more the vibration decibel increases. At the road condition, the vibration decibel at the wet road is smaller than the value at dry road condition.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.155-163
• /
• 2000

This paper presents a path planning method of the sensor based intelligent vehicle using fuzzy logic controller for avoidance of moving obstacles in unknown environments. Generally it is too difficult and complicated to control intelligent vehicle properly by recognizing unknown terrain with sensors because the great amount of imprecise and ambiguous information has to be considered. In this respect a fuzzy logic can manage such the enormous information in a quite efficient manner. Furthermore it is necessary to use the relative velocity to consider the mobility of obstacles, In order to avoid moving obstacles we must deliberate not only vehicle's relative speed toward obstacles but also self-determined acceleration and steering for the satisfaction of avoidance efficiency. In this study all the primary factors mentioned before are used as the input elements of fuzzy controllers and output signals to control velocity and steering angle of the vehicle. The main purpose of this study is to develop fuzzy controllers for avoiding collision with moving obstacles when they approach the vehicle travelling with straight line and for returning to original trajectory. The ability are and effectiveness of the proposed algorithm are demonstrated by simulations and experiments.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.513-520
• /
• 2011

This paper presents the motion planning of robotic vehicles for the path tracking and the obstacle avoidance. To follow the given path, the vehicle moves through the turning radius obtained through the pure pursuit method, which is a geometric path tracking method. In this paper, we assume that the vehicle is equipped with a 2D laser scanner, allowing it to avoid obstacles within its sensing range. The turning radius for avoiding the obstacle, which is inversely proportional to the virtual force, is then calculated. Therefore, these two kinds of the turning radius are used to generate the steering angle for the front wheel of the vehicle. And the vehicle reduces the velocity when it meets the obstacle or the large steering angle using the potentials of obstacle points and the steering angle. Thus the motion planning of the vehicle is done by planning the steering angle for the front wheels and the velocity. Finally, the performance of the proposed method is tested through simulation.

• 조명전기설비학회논문지
• /
• 제14권2호
• /
• pp.31-35
• /
• 2000

본 논문에서는 차량의 추종 주행 제어기를 비선형 상태관측자를 이용하여 설계한다. i 번째 차량(추종차량}과 i-1 번째 차량(선행차량) 간의 거리(상대거리)만을 측정하여 아는 것으로 간주 한다. 선행차량의 속도 및 가속도를 추정하기 위한 비션형 상태관측자를 설계하여 추종차량의 추종 주행 제어기에 이용할 수 있도록 한다. 본 논문에서 제안하는 방법이 차간 통신이 필요 없음을 수학적으로 증명한다. 또한 비선형 상태관측자를 이용하여 추정한 선행 차량간의 상대속도 및 상대가속도 오차가 '0' 으로 수렴함을 증명한다. 제안한 방법의 타당성은 수학적인 증명과 더불어 컴퓨터 시뮬레이션을 통하여 검증한다.