• 제목/요약/키워드: Vehicle domain

검색결과 233건 처리시간 0.021초

삼원 촉매의 열적 내구 성능 평가 (A Estimation of Thermal Fatigue Performance in Three-way Catalyst)

  • 이성룡;조석수
    • 한국산학기술학회논문지
    • /
    • 제14권1호
    • /
    • pp.13-19
    • /
    • 2013
  • 국내 승용차용 삼원촉매의 경우 열적 내구성을 만족시키지 못하고 조기 파손되는 사례가 증가하고 있다. 이것은 차량의 배기가스 정화장치의 신뢰성에 치명적 손상을 유발시키므로 삼원촉매의 내구성 평가 모델을 파악할 필요가 있다. 따라서 본 연구에서는 세라믹 모노리스 담체에서 발생되는 열응력을 구한 뒤 강도저하계수모델과 파손확률을 기초로 삼원촉매의 열적 내구성을 평가하였다.

Low-frequency modes in the fluid-structure interaction of a U-tube model for the steam generator in a PWR

  • Zhang, Hao;Chang, Se-Myong;Kang, Soong-Hyun
    • Nuclear Engineering and Technology
    • /
    • 제51권4호
    • /
    • pp.1008-1016
    • /
    • 2019
  • In the SG (steam generator) of PWR (pressurized water reactor) for a nuclear plant, hundreds of U-shaped tubes are used for the heat exchanger system. They interact with primary pressurized cooling water flow, generating flow-induced vibration in the secondary flow region. A simplified U-tube model is proposed in this study to apply for experiment and its counterpart computation. Using the commercial code, ANSYS-CFX, we first verified the Moody chart, comparing the straight pipe theory with the results derived from CFD (computational fluid dynamics) analysis. Considering the virtual mass of fluid, we computed the major modes with the low natural frequencies through the comparison with impact hammer test, and then investigated the effect of pump flow in the frequency domain using FFT (fast Fourier transform) analysis of the experimental data. Using two-way fluid-structure interaction module in the CFD code, we studied the influence on mean flow rate to generate the displacement data. A feasible CFD method has been setup in this research that could be applied potentially in the field of nuclear thermal-hydraulics.

Real-time comprehensive image processing system for detecting concrete bridges crack

  • Lin, Weiguo;Sun, Yichao;Yang, Qiaoning;Lin, Yaru
    • Computers and Concrete
    • /
    • 제23권6호
    • /
    • pp.445-457
    • /
    • 2019
  • Cracks are an important distress of concrete bridges, and may reduce the life and safety of bridges. However, the traditional manual crack detection means highly depend on the experience of inspectors. Furthermore, it is time-consuming, expensive, and often unsafe when inaccessible position of bridge is to be assessed, such as viaduct pier. To solve this question, the real-time automatic crack detecting system with unmanned aerial vehicle (UAV) become a choice. This paper designs a new automatic detection system based on real-time comprehensive image processing for bridge crack. It has small size, light weight, low power consumption and can be carried on a small UAV for real-time data acquisition and processing. The real-time comprehensive image processing algorithm used in this detection system combines the advantage of connected domain area, shape extremum, morphology and support vector data description (SVDD). The performance and validity of the proposed algorithm and system are verified. Compared with other detection method, the proposed system can effectively detect cracks with high detection accuracy and high speed. The designed system in this paper is suitable for practical engineering applications.

Spatial Multilevel Optical Flow Architecture-based Dynamic Motion Estimation in Vehicular Traffic Scenarios

  • Fuentes, Alvaro;Yoon, Sook;Park, Dong Sun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권12호
    • /
    • pp.5978-5999
    • /
    • 2018
  • Pedestrian detection is a challenging area in the intelligent vehicles domain. During the last years, many works have been proposed to efficiently detect motion in images. However, the problem becomes more complex when it comes to detecting moving areas while the vehicle is also moving. This paper presents a variational optical flow-based method for motion estimation in vehicular traffic scenarios. We introduce a framework for detecting motion areas with small and large displacements by computing optical flow using a multilevel architecture. The flow field is estimated at the shortest level and then successively computed until the largest level. We include a filtering parameter and a warping process using bicubic interpolation to combine the intermediate flow fields computed at each level during optimization to gain better performance. Furthermore, we find that by including a penalization function, our system is able to effectively reduce the presence of outliers and deal with all expected circumstances in real scenes. Experimental results are performed on various image sequences from Daimler Pedestrian Dataset that includes urban traffic scenarios. Our evaluation demonstrates that despite the complexity of the evaluated scenes, the motion areas with both moving and static camera can be effectively identified.

Orthogonal variable spreading factor encoded unmanned aerial vehicle-assisted nonorthogonal multiple access system with hybrid physical layer security

  • Omor Faruk;Joarder Jafor Sadiqu;Kanapathippillai Cumanan;Shaikh Enayet Ullah
    • ETRI Journal
    • /
    • 제45권2호
    • /
    • pp.213-225
    • /
    • 2023
  • Physical layer security (PLS) can improve the security of both terrestrial and nonterrestrial wireless communication networks. This study proposes a simplified framework for nonterrestrial cyclic prefixed orthogonal variable spreading factor (OVSF)-encoded multiple-input and multiple-output nonorthogonal multiple access (NOMA) systems to ensure complete network security. Various useful methods are implemented, where both improved sine map and multiple parameter-weighted-type fractional Fourier transform encryption schemes are combined to investigate the effects of hybrid PLS. In addition, OVSF coding with power domain NOMA for multi-user interference reduction and peak-toaverage power ratio (PAPR) reduction is introduced. The performance of $\frac{1}{2}$-rated convolutional, turbo, and repeat and accumulate channel coding with regularized zero-forcing signal detection for forward error correction and improved bit error rate (BER) are also investigated. Simulation results ratify the pertinence of the proposed system in terms of PLS and BER performance improvement with reasonable PAPR.

Real time instruction classification system

  • Sang-Hoon Lee;Dong-Jin Kwon
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제16권3호
    • /
    • pp.212-220
    • /
    • 2024
  • A recently the advancement of society, AI technology has made significant strides, especially in the fields of computer vision and voice recognition. This study introduces a system that leverages these technologies to recognize users through a camera and relay commands within a vehicle based on voice commands. The system uses the YOLO (You Only Look Once) machine learning algorithm, widely used for object and entity recognition, to identify specific users. For voice command recognition, a machine learning model based on spectrogram voice analysis is employed to identify specific commands. This design aims to enhance security and convenience by preventing unauthorized access to vehicles and IoT devices by anyone other than registered users. We converts camera input data into YOLO system inputs to determine if it is a person, Additionally, it collects voice data through a microphone embedded in the device or computer, converting it into time-domain spectrogram data to be used as input for the voice recognition machine learning system. The input camera image data and voice data undergo inference tasks through pre-trained models, enabling the recognition of simple commands within a limited space based on the inference results. This study demonstrates the feasibility of constructing a device management system within a confined space that enhances security and user convenience through a simple real-time system model. Finally our work aims to provide practical solutions in various application fields, such as smart homes and autonomous vehicles.

센서기반 FPMIPv6 네트워크에서 멀티캐스팅 기반의 도메인간 이동성관리 기법 (mSFP: Multicasting-based Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks)

  • 장하나;정종필
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제2권1호
    • /
    • pp.15-26
    • /
    • 2013
  • IP기반 무선 센서 네트워크(IP-WSN)는 의료, 주택 자동화, 환경 모니터링, 산업용 제어, 차량 텔레매틱스 및 농업 모니터링 등 광범위하게 적용되고 있다. 이러한 적용은 에너지 효율과 함께 센서의 이동성이 중요한 문제로 다루어진다. 에너지 비효율로 인해 네트워크 기반의 이동성관리 프로토콜은 IP-WSN에서 지원될 수 있다. 본 논문에서는 IP-WSN 프로토콜을 지원하는 멀티캐스팅 기반의 빠른 이동성관리 기법(mSFP)을 제안한다. 네트워크 구조와 시그널링 비용, 이동성 비용 등을 고려한 성능분석을 수행하였고[8,20], 분석 결과 PMIPv6와 SPMIPv6에 비하여 mSFP의 시그널링 비용, 전체 시그널링 비용, 이동성 비용이 모두 감소되었다. IP-WSN 노드의 수 측면에서 mSFP의 시그널링 비용은 7%, 전체 시그널링 비용은 3% 더 감소되었다. 홉의 수 측면에서 mSFP의 시그널링 비용은 6.9%, 전체 시그널링 비용은 2.5% 더 감소되었다. IP-WSN 노드의 수 측면에서 이동성 비용은 1.6%, 홉의 수 측면에서 이동성 비용은 1.5% 더 감소되었다.

자동차 환경에서 TDOA를 이용한 화자위치추정 방법 (On the speaker's position estimation using TDOA algorithm in vehicle environments)

  • 이상헌;최홍섭
    • 디지털콘텐츠학회 논문지
    • /
    • 제17권2호
    • /
    • pp.71-79
    • /
    • 2016
  • 본 논문에서는 차량 내부 환경에서 음성인식 성능을 향상시켜 안정적인 차량 제어를 위한 방법으로 사용하는 음원 위치추정방법의 성능 비교와 개선 방법을 제안하였다. 일반적으로 음원 위치추정에는 TDOA알고리즘을 사용하는데 여기에는 시간영역에서 상호상관함수를 이용하는 방법과, 주파수 영역에서 계산하는 GCC-PHAT 방법이 있다. 이중 GCC-PHAT 방법은 상호상관함수보다 반향과 잡음에 강한 특성을 보인다고 알려져 있다. 본 연구에서는 반향과 잡음이 많은 차량 환경에서 위 두 방법의 성능을 비교하고 추가로 미디언 필터 사용을 제안하여 음원위치 추정 성능과 시스템의 안정성을 나타내는 지표로 사용하는 분산값이 모두 향상됨을 확인하였다. 실험결과에서 음성을 사용한 실험에서는 두 방법의 성능 차이가 거의 없지만, 노래신호를 사용한 음원위치 추정에서는 GCC-PHAT 방법이 상호상관함수에 비해 인식률이 10% 우수함을 확인하였다. 또한 미디언 필터를 추가한 경우에는 상호상관함수 방법의 인식률을 최고 11%까지 향상시킬 수 있었고 분산값에서도 두 방법 모두 안정적인 성능을 보여주었다.

도시부 자율주행셔틀 실증을 위한 운행설계영역 분석: 안양시를 중심으로 (Operational Design Domain for Testing of Autonomous Shuttle on Arterial Road)

  • 김형주;임경일;김재환;손웅비
    • 한국ITS학회 논문지
    • /
    • 제19권2호
    • /
    • pp.135-148
    • /
    • 2020
  • 현재 진행되고 있는 자율주행 관련 기술 발전은 실제 도로를 사용한 자율주행 테스트 시 다양한 안전사고가 발생할 가능성이 존재한다. 특히 자율주행자동차법 시행으로 실제 도로에서의 자율주행 실증은 증가할 것이며, 안전사고 예방을 위해 국내 도로환경에 적합한 운행설계영역에 대한 연구가 요구된다. 따라서 본 연구는 도심부 자율주행셔틀 실증을 위한 운행설계영역을 정의하고, 안양시 도심부도로를 중심으로 자율주행 운행 가능여부 등의 운행설계영역 평가를 실시한다. 본 연구의 자율주행 운행설계영역은 국내의 도로환경과 안전을 우선적으로 고려하였으며, 기하구조적 요인, 운영적 요인, 환경적 요인을 포함한다. 분석결과 노드기준에서는 노드유형 및 신호-통신 여부를 통해서 30개 노드에서 자율주행셔틀 실증이 가능한 것으로 분석되었다. 링크기준에서는 오전첨두(8-9시) 42개, 비첨두(12-13시) 39개, 그리고 오후첨두(18-19시) 40개 방향별 링크구간에서 자율주행 제한으로 분석되었다. 본 연구결과는 향후 자율주행 실증테스트가 이루어지는 도심부도로에서 사전 안전성 평가의 수범사례로 활용될 가치가 있다.

차량 궤적 추적을 위한 불확실성 처리기 구현 (Implementation of Uncertainty Processor for Tracking Vehicle Trajectory)

  • 김진석;김동호;류근호
    • 정보처리학회논문지D
    • /
    • 제11D권5호
    • /
    • pp.1167-1176
    • /
    • 2004
  • 인터넷 기술의 발달로 다양한 응용분야의 컴퓨팅 환경은 상당한 변화를 겪어 왔다. 특히 지난 3년여 동안 물류분야에서는 물류 회사간 인터넷 기반의 가상 비즈니스 활동 또는 서비스 아키텍처를 의미하는 e-로지스틱스라는 새로운 개념에 대한 활발한 연구가 진행되었다. 효과적인 e-로지스틱스 프레임워크 구축을 위해서 GIS, GPS 및 시공간 데이터베이스를 포함하는 이동체 기술 개발이 진행 중에 있다. 이동체 기술은 자동차, 비행기, 선박 등과 같이 시간에 따라 공간상의 위치를 변경하는 시공간 객체에 대한 효율적인 데이터 관리를 의미한다. 그러나 기존의 관련 시스템은 여러 가지 이유로 이동체에 대하여 오직 가장 최근에 검출된 위치정보만을 관리하기 때문에, 과거 및 미래의 불확실한 위치 추정방법에 대한 구체적인 제시는 미약한 상태에 있다. 따라서 이 논문에서는 이동체에 대한 이력정보 관리와 이를 이용한 과거의 위치 추정이 가능한 시스템을 제안한다. 이를 위해 물류 운송차량 위치 추적을 위한 모델링과 데이터베이스 및 시스템 구조를 제시한다. 아울러 제안 시스템을 e-로지스틱스 분야의 주요 응용인 택배 차량에 대한 위치정보 불확실성 처리 시나리오에 적용하는 예를 가지고 설명한다.