• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.179-187
• /
• 2014

사고기록장치는 사고 전 후의 차량의 상태 및 운동 정보를 기록하는 장치로 객관적인 사고분석과 실사고 데이터를 이용한 자동차 안전장비의 개발을 위해 교통사고 조사기관과 부품개발사에서 많은 관심을 보이고 있다. 본 연구는 사고기록장치의 출력데이터를 이용한 교통사고재현을 통해 객관적, 과학적 사고분석에 목적을 두고, 더블레인 체인지 테스트 6회 슬라롬 테스트 1회의 실차 주행시험 및 시뮬레이션을 진행하였다. 실차시험을 통하여 취득한 차량의 속도, 종 횡방향 가속도, 조향각, 주행경로 등의 정보를 이용하여 교통사고 재현 및 분석 프로그램인 PC-Crash로 시뮬레이션을 진행하였다. 시뮬레이션은 가속도-조향각 입력방법과 가속도-주행경로 입력방법으로 2회 진행하였으며, 실차시험 결과와 2가지 시뮬레이션의 결과를 비교하여 최적의 경로 재현성을 갖는 분석방법을 도출하였다.

• 대한교통학회지
• /
• 제26권2호
• /
• pp.7-15
• /
• 2008

자동차 안전도평가제도는 제작사가 보다 안전한 자동차를 제작하도록 유도하기 위해 충돌시험 등을 통하여 자동차의 안전성을 평가하고, 그 결과를 소비자에게 공개하고 있다. 이것은 자동차 사고로 인한 사회적 손실을 감소시킬 수 있는 효과적인 자동차 안전정책 중의 하나로써, 우리나라는 1999년부터 건설교통부 주관으로 신차평가를 실시하고 있다. 현재 안전도평가 대상차종이 크게 증가하여 안전도평가 대상 차종의 확대가 필요한 시점임에도 불구하고, 현실은 그렇지 못한 실정인데, 그 이유로는 평가인력, 시설 및 비용 등 여러 가지가 있겠으나, 가장 근본적인 이유는 자동차 안전도평가제도의 효과를 정확하게 파악하지 못하기 때문인 것으로 판단된다. 이에 본 연구에서는 자동차 안전도평가제도를 통해 자동차제작사가 자동차의 안전도를 향상시킴으로써 교통사고 발생시 사고의 심각도를 얼마나 줄여줄 수 있는지를 정량적으로 분석함으로써 자동차 안전도평가제도의 효과를 측정해 보고자 하였다. 안전도평가 항목 중 이용가능한 자료가 있는 정면충돌만을 대상으로 정면충돌로인한 사상자 수를 추정하고 안전도가 향상된 차종의 판매대수를 이용하여 자동차 안전도평가제도의 효과를 측정할 수 있는 방법을 개발하였다. 2005년도 자료를 이용하여 정면충돌사고 시 사상자 감소분을 추정해 본 결과, 자동차 안전도평가제도를 시행함으로써 자동차 안전도가 향상되어 2005년 1년 동안 교통사고로 인한 사망자는 약 1.51명, 부상자는 약 446명 감소한 것으로 나타났다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.243-251
• /
• 1993

With the recent issuance of a dynamic side impact test regulation in the Federal Motor Vehicle Safety Standard in the United States of America, many aspects of occupant protection in side impact crashes have been under investigation. Many investigations of real world accidents, crash test results and simulation studies have established that in side impact crashes of passenger cars, thoracic and pelvic injuries of occupant are, large part, caused by occupants' impact against the interior side of the vehicle, primarily the door. This paper is concerned with the development of a lumped mass computer model, which simulates the interaction of a struck car door and an adjacent seated occupant in side impacr, based CTP code which has been successfully used in vehicle and occupant simulation. New model developments include elimination of influence of vehicle side structure stiffness in the occupant injury responses. The model was used to investigated the effect of various door padding characteristics on occupant responses to improve vehicle safety performance. The evaluation of different crush properties of door padding have also focused to understand of behavior of impacted occupant. Results from simulations, The effects of both material coefficients $C_{f}$ and p were illustrated in terms of occupant injury criteria TTI and pelvis.

• 자동차안전학회지
• /
• 제9권3호
• /
• pp.13-18
• /
• 2017

Since 2015, Euro-NCAP and C-NCAP have enhanced regulation on submarine of rear female passenger. This submarine regulation is a big obstacle to achieve the highest level crash performance. So the objective of this study is to develop new technical way to protect rear female passenger against submarine. In this study, we figured out how design factors of seatbelt affect submarine of rear female passenger by sled test. And we verified that rear passenger submarine can be improved by increasing intersection angle of seatbelt anchor and rotation amount of seatbelt buckle. Based on these results, this paper proposes a new invention of seatbelt buckle and anchor that can improve rear passenger submarine. One is seatbelt buckle that can be detached from stopper to prevent rotation and the other is seatbelt anchor that can be changed the structure so as to incline forward during crash. Finally we proved that submarine of rear female passenger can be improved by the effectiveness of new inventions.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.60-64
• /
• 2022

In the automotive industry, the development of automobiles to meet safety requirements is becoming increasingly complex. This is because quality evaluation agencies in each country are continually strengthening new safety standards for vehicles. Among these various requirements, collision safety must be satisfied by controlling airbags, seat belts, etc., and can be defined as post-crash safety. Apart from this safety system, the Advanced Driver Assistance Systems (ADAS) use advanced detection sensors, GPS, communication, and video equipment to detect the hazard and notify driver before the collision. However, research to improve passenger safety in case of an accident by using the sensor of active safety represented by ADAS in the existing passive safety is limited to the level that utilizes the sudden braking level of the FCA (Forward Collision-avoidance Assist) system. Therefore, this study aims to develop logic that can improve passenger protection in case of an accident by using ADAS information and driving information secured before a collision. The proposed logic was constructed based on LSTM deep learning techniques and trained using crash test data.

• 소성∙가공
• /
• 제15권8호
• /
• pp.556-561
• /
• 2006

Most of auto-body members are composed of stamping parts. These parts have the non-uniform thickness and plastic work hardening distribution during the forming process. This paper is concerned with the side impact analysis of the ULSAB-AVC model according to the US-SINCAP in order to compare the crashworthiness between the model with and without considering the forming effect. The forming effect is ca]ciliated by one-step forming analysis for several members. The crashworthiness is investigated by comparing the deformed shape of the cabin room the energy absorption characteristics and the intrusion velocity of a car. The result of the crash analysis demonstrates that the crash mode, the load-carrying capacity and energy absorption can be affected by the forming effect. It is noted that the design of an autobody should be carried out considering the forming effect for accurate assessment of crashworthiness.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.622-625
• /
• 2016

우리나라는 삼면이 바다로 구성되어 있고 산악지형이 65% 이상이며 강수량이 높은 편이다. 따라서 차량 전복 및 추락 사고가 빈번히 일어나고 있어 이에 대비한 인명구조시스템 개발이 시급히 요구되고 있다. 본 논문에서는 차량 전복 및 추락사고 대처용 인명구조 시스템을 설계 및 구현하고 시험을 통해 기능을 검증하였다.

• 자동차안전학회지
• /
• 제9권3호
• /
• pp.31-38
• /
• 2017

For years, Q1.5 (anthropomorphic test device for 1.5 years old infant) and Q3 (anthropomorphic test device for 3 years old infant) dummy protection has been improved considerably by the effort of EuroNCAP. ISOFIX strength of vehicle structure has increased and many child occupant protection tests have made child restraint system (hereafter CRS) optimized for child safety. However, from 2016, EuroNCAP changed the dummy which is used for the child occupant protection from Q1.5/Q3 to Q6/Q10 and these were also adopted in KNCAP from 2017. Therefore, a new method is required to secure the safety for older children In this research, child dummies were tested by using adult safety systems, and the different results from each adult restraint system were compared. Finally, dummies were tested with the CRS harness belt commonly used for infants, which has yielded significant result. In this research, mid-sized sedan and small SUV were used for the test. The researchers of this paper performed sled tests to correlate between the different adult safety belt system and child injury. Following the sled test, an actual vehicle test was conducted to gather the injury data of Q-dummy with the CRS harness belts. This paper will show the advantages of applying a pre-tensioner in the second row for child protection and the necessity of CRS which has its own harness belts to improve safety for older children.

• 한국ITS학회 논문지
• /
• 제18권2호
• /
• pp.114-128
• /
• 2019

최근 전 세계적으로 자율주행자동차의 관심이 높이지고 있으며, 이에 따라 자율주행자동차의 안전성도 중요한 화두로 대두되고 있다. 국내에서도 자율주행자동차 실험도시인 K-City 구축 등 자율주행자동차 개발이 활발해짐에 따라, 자율주행자동차의 안전성을 평가할 수 있는 시나리오 개발이 필요한 시점이다. 본 연구에서는 경찰청 교통사고 데이터와 텍스트 마이닝 기법을 이용하여 K-City 커뮤니티부 도로 자율주행자동차 실험 시나리오를 개발하였다. 개발 결과, K-City 커뮤니티부 도로에서 자율주행자동차 실험을 위한 총 24개의 시나리오가 개발되었다. 또한, 페가수스 5-레이어 모형을 적용한 Logical 및 Concrete 혼합 시나리오 양식을 최종적으로 도출하였다.