• 제목/요약/키워드: Vehicle Steering

검색결과 671건 처리시간 0.03초

자기궤도 자율주행시스템 기본설계를 위한 자계특성분석 (Analysis Magnetic Field for Basic Design of Autonomous System by Magnetic Guidance)

  • 임대영;유영재;김의선;목재균
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 춘계학술대회 논문집
    • /
    • pp.181-186
    • /
    • 2005
  • In this paper, an estimation system of vehicle position and orientation on magnetic lane, which is a parameter of the steering controller for automated lane follwing is described. To verify that the magnetic dipole model could be applied to a magnetic unit paved in roadway, the analysis of the the data 3-axis magnetic field measured experimentally.

  • PDF

UTV용 C-EPS 시스템 설계 (Design of C-EPS System for Utility Type Vehicle)

  • 안진일;손영대
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.95-96
    • /
    • 2015
  • EPS(Electrical Power Steering) 시스템은 전동기의 설치 위치에 따라 C-EPS(Column-EPS), R-EPS(Rack-EPS), P-EPS(Pinion-EPS)로 나눌 수 있다. 본 논문에서는 농업용 UTV 차량에 적용할 수 있는 C-EPS 시스템의 이론적 모델링과 실험시스템의 설계 및 제작, 그리고 시작품의 실험을 통하여 조향제어 성능을 검증하였다.

  • PDF

메카트로닉 열차 연구동향 (Mechatronic Train for Next Generation)

  • 곽재호;유원희
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 논문집
    • /
    • pp.35-42
    • /
    • 2006
  • This paper presents a brief overview of the concepts, achievements and challenges relating to the use of electronic and computer control for railway vehicles in the aspect of mechatronic design. It can provides the rail vehicles of tomorrow must be more cost effective, energy efficient, and dynamic performance. The main emphasis in this paper will be upon the use of active control for suspension and steering for new approaches of incorporation of sensors, controllers, and actuators. They can make vehicle designers to take advantages optimizing mechanics and electronics jointly which are not possible with a purely mechanical approach.

  • PDF

AGV 시스템의 운영기술 개발 (Development of Operating Technology for AGV System)

  • 송준엽;이승우;이현용
    • 연구논문집
    • /
    • 통권22호
    • /
    • pp.27-38
    • /
    • 1992
  • We deals with stationary layout control system of AGV. It is a intelligent control system to he wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steering, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR(JnfraRed) modem. Especially it is possible to easily network to use not an exclusive controller of AGV but personal computer(PC) when communicate and interface a different kind of controller.

  • PDF

시뮬레이션을 이용한 충돌 전후 차량 진행궤적 분석 (Analysis of vehicle progress before and after a collision using simulation)

  • 한창평
    • 한국산학기술학회논문지
    • /
    • 제22권1호
    • /
    • pp.402-408
    • /
    • 2021
  • 기계 설계를 기반으로 제작한 자동차에 의한 사고 발생 시 차량 공학적인 분석은 심도 있게 조사하지 않고 조사자의 주관적인 경험 지식을 토대로 분석하는 경우가 있다. 본 연구는 실제 발생한 중앙선 침범 사고 자료를 토대로 캐드(CAD) 프로그램을 이용하여 현장 상황을 도면화하고, 도면화 한 자료를 시뮬레이션 프로그램(PC-Crash)에 적용하여 250번의 충돌 상황을 반복적으로 수행하여 최종 정지 위치 및 최종 정지 자세와 부합하는 충돌 속도, 진행 자세, 조향 작동 여부 및 제동 여부 등의 상관 관계를 분석했다. 충돌 속도가 낮을수록 이탈각의 영향을 크게 받지 않고 속도가 높은 차량의 속도에 영향을 크게 받고 충돌 이후에는 유효 충돌 속도와 같이 속도가 낮은 차량은 높아지고, 속도가 높은 차량은 낮아진다. 본 연구의 시뮬레이션 결과는 마이티가 중앙선을 넘은 자세로 오르막 좌커브 구간을 진행하다가 마주오던 포터를 인지하고 자기 진행 차로로 복귀하는 과정과 포터의 전면 좌측면이 충돌하여 포터가 우대각선 방향으로 밀려나 전면이 약 11시 방향을 향해 최종 정지하는 것을 규명하였다.

열차의 곡선주행능 해석에 관한 연구 (A Study on the Analysis of Curving Performance of Railway Vehicle)

  • 김도중;박삼진
    • 한국기계연구소 소보
    • /
    • 통권14호
    • /
    • pp.101-110
    • /
    • 1985
  • Kyung-p-1 main line is characterized by its curves radii of which are considerably small. It is essential for running time reduction of train to improve capabilities of curve negotiation. This improvement can be achieved by designing a bogie with flexible suspension system. The effect of the improvement is mainly concerned in the primary yaw stiffness of bogie suspension. This paper gives a linear analysis for the motion of railway vehicle on curved track and gives also computer simulation results for Semaul Train. The results introduce a conclusion that the primary yaw stiffness of Semaul train is too rigid to be self-steering on Kyung-pu main line curves.

  • PDF

두 개의 광류센서를 이용한 소형무인로봇의 위치 추정 기술 (Localization with Two Optical Flow Sensors for Small Unmanned Ground Vehicles)

  • 허진욱;강신천;현동준
    • 한국군사과학기술학회지
    • /
    • 제16권2호
    • /
    • pp.95-100
    • /
    • 2013
  • Localization is very important for the autonomous navigation of Unmanned Ground Vehicles; however, it is difficult that they have a precise Inertial Navigation System(INS) sensor, especially Small Unmanned Ground Vehicle(SUGV). Moreover, there are some condition such as denial of global position system(GPS), GPS/INS integrated system is not robust. This paper proposes the estimation algorithm with optical flow sensor and INS. Being compared with previous researches, the proposed algorithm is suitable for skid steering vehicles. We revised the measurement model of previous research for the accuracy of side direction position. Experimental results were performed to verify the algorithm, and the result showed an excellent performance.

만타형 UUV의 제어기 설계에 관한 연구 (A Study of the Control System for the Manta-type UUV)

  • 김형동;이승건;김준영;김시홍
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2010년도 추계학술대회
    • /
    • pp.42-43
    • /
    • 2010
  • 본 연구에서는 만타 형상 무인잠수정(Manta-type unmanned underwater test vehicle)의 제어 성능 평가를 하였다. PID제어, Fuzzy 제어가 적용되었으며, 6자유도 운동을 사용하여 Matlab Simulink로 시뮬레이션 프로그램을 구성하였다. 설계된 제어기로 수심 및 방위제어에 사용되었으며 조류의 외란 하에서의 제어 성능을 평가하였다.

  • PDF

조종안정성 평가를 위한 경로제어모델 (A Path Control Model to Evaluation Handling Characteristic of Vehicles)

  • 탁태오;최재민
    • 한국자동차공학회논문집
    • /
    • 제9권1호
    • /
    • pp.139-147
    • /
    • 2001
  • In this study a path control scheme of simulation models of various vehicles to evaluate their handling characteristic is developed. Based on the forward target method, path deviation error is estimated and the required steering effort to reduce the error is computed by Ziegler-Nichols PID control rule. Velocity control model is also included in the proposed path control scheme to achieve the desired velocity. The path control scheme is implemented on a full vehicle model to perform ISO test procedures, such as steady state cornering, lane change, and sinusoidal input, etc. Through the simulations of ISO test procedures and comparison with actual tests, effectiveness and validity of the path control model is demonstrated.

  • PDF