• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1421-1426
• /
• 2012

차량 선회 시 조종안정성과 주행 승차감을 향상시키기 위하여 능동적으로 차체의 롤(roll)을 줄이기 위한 연구가 진행되고 있다. 전동식 능동 롤 제어(ARC) 시스템은 전후 스테빌라이저바 중앙에 위치한 전동 모터 방식의 구동기에 의해 차량의 차체 롤을 제어한다. 본 연구에서는 이러한 전동식 ARC 시스템의 제어 성능 및 차량 동역학적 특성을 평가하고 검증하기 위한 해석, 벤치 시험, 실차 시험의 3단계 절차와 방법을 제안하였다. ARC 제어로직의 성능 및 타당성 평가를 위한 Matlab/Simulink와 CarSim 간의 연동-해석 방법을 제안하였고, ARC 구동기 및 시스템의 성능을 평가하기 위한 벤치 시험 방법과 실차 시험 방법을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.15-25
• /
• 2018

Post-construction subgrade settlement especially differential settlement, has become a key issue in construction and operation of non-ballasted track on high-speed railway soil subgrade, which may also affect the dynamic performance of passing trains. To estimate the effect of differential subgrade settlement on the mechanical behaviors of the vehicle-slab track system, a detailed model considering nonlinear subgrade support and initial track state due to track self-weight is developed. Accordingly, analysis aiming at a typical high-speed vehicle coupled with a deteriorated slab track owing to differential subgrade settlement is carried out, in terms of two aspects: (i) determination of an initial mapping relationship between subgrade settlement and track deflections as well as contact state between track and subgrade based on a semi-analytical method; (ii) simulation of dynamic performance of the coupled system by employing a time integration approach. The investigation indicates that subgrade settlement results in additional track irregularity, and locally, the contact between the concrete track and the soil subgrade is prone to failure. Moreover, wheel-rail interaction is significantly exacerbated by the track degradation and abnormal responses occur as a result of the unsupported areas. Distributions of interlaminar contact forces in track system vary dramatically due to the combined effect of track deterioration and dynamic load. These may not only intensify the dynamic responses of the coupled system, but also have impacts on the long-term behavior of the track components.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.342-348
• /
• 2014

차륜과 레일의 접촉은 크리프를 유발한다. 크리프 증가에 따라 크리프력이 선형적으로 증가한다고 가정하는 선형 크리프 이론은 철도차량의 진동이 무한히 발산하는 주행속도인 임계속도를 결정한다. 그러나 실제 크리프력은 일정값에 수렴하며 철도차량의 횡진동은 무한히 증가되지도 않는다. 본 연구에서는 비선형 크리프 이론인 Vermeulen이론, Polach이론, 실제 차륜과 레일의 형상을 고려하여 계산된 줄이론 등을 6 자유도 대차모델에 적용하여 철도차량의 동특성을 검토하였다. 그 결과 철도차량의 진동은 특정 주행속도 이상에서 한계사이클을 만들었으며, 크리프 곡선의 기울기가 클수록 한계사이클이 발생하는 주행속도는 낮아졌다. 또한 한계사이클은 플랜지 접촉으로 인해 그 크기가 제한되는 헌팅현상이 발생됨을 알았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1055-1058
• /
• 2003

The robustness and reliability of vision algorithms is the key issue in robotic research and industrial applications. In this paper robust real time visual tracking in complex scene is considered. A common approach to increase robustness of a tracking system is the use of different model (CAD model etc.) known a priori. Also fusion or multiple features facilitates robust detection and tracking of objects in scenes of realistic complexity. Voting-based fusion of cues is adapted. In voting. a very simple or no model is used for fusion. The approach for this algorithm is tested in a 3D Cartesian robot which tracks a toy vehicle moving along 3D rail, and the Kalman filter is used to estimate the motion parameters. namely the system state vector of moving object with unknown dynamics. Experimental results show that fusion of cues and motion estimation in a tracking system has a robust performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.818-821
• /
• 1999

Helicopter system is regarded as a challenging example in multivariable robust control application since the dynamics of helicopter is highly coupled and nonlinear. In this paper, Dynamic equations for model helicopter at hover are derived. Various system properties are stated with respect to control of the attitude of the vehicle. A linearized model is used to analyse the system stability and to design the attitude controller. The simulation results of LQG controller are presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.848-872
• /
• 2015

Hydrodynamic derivatives or coefficients are required to predict the maneuvering characteristics of a marine vehicle. These derivatives are obtained numerically for a DTMB 5512 model ship by virtual simulating of captive model tests in a CFD environment. The computed coefficients are applied to predict the turning circle and zig-zag maneuvers of the model ship. The comparison of the simulated results with the available experimental data shows a very good agreement among them. The simulations show that the CFD is precise and affordable tool at the preliminary design stage to obtain maneuverability performance of a marine vehicles.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.340-346
• /
• 2008

An unmanned surveillance robot consists of a machine gun, a laser receiver, a thermal imager, a color CCD camera, and a laser illuminator. It has two axis control systems for elevation and azimuth. Because the current robot system is mounded at a fixed post to take care of surveillance tasks, it is necessary to modify such a surveillance robot to be installed on an UGV (Unmanned Ground Vehicle) system in order to watch blind areas. Thus, it is required to have a stabilization system to compensate the disturbance from the UGV. In this paper, a simulation based design scheme has been adopted to develop a mobile surveillance robot. The 3D CAD geometry model has first been produced by using Pro-Engineer. The required pan and tilt motor capacities have been analyzed using ADAMS inverse dynamics analysis. A target tracking and stabilization control algorithm of the mobile surveillance robot has been developed in order to compensate the motion of the vehicle which will experience the rough terrain. To test the performance of the stabilization control system of the robot, ADAMS/simulink co-simulations has been carried out.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.240-249
• /
• 2013

This paper discusses the maneuvering control algorithm based on all-wheel independent driving and steering control techniques for special purpose 6WD/WS vehicles. The maneuvering control algorithms considering superior dynamic characteristics of high power in-wheel motors and independent steering system are designed to perform driving, steering, vehicle stability, and fault tolerant control. The maneuvering controller applies sliding and optimal control theories considering optimal torque distribution and friction circle related to the vertical tire force. The fault tolerant control algorithm is applied to obtain the similar maneuverability to that of the non-faulty vehicle. The simulations using the Matlab/Simulink dynamics model and experiments using HIL simulator mounting the real controllers with the designed control algorithms prove the improved performances in terms of vehicle stability and maneuverability.

• Wind and Structures
• /
• 제17권2호
• /
• pp.203-225
• /
• 2013

An analysis framework for vehicle-bridge dynamic interaction system under turbulent wind is proposed based on the relevant theory of wind engineering and dynamics. Considering the fluctuating properties of wind field, the stochastic wind velocity time history is simulated by the Auto-Regressive method in terms of power spectral density function of wind field. The bridge is represented by three-dimensional finite element model and the vehicle by a multi-rigid-body system connected by springs and dashpots. The detailed calculation formulas of unsteady aerodynamic forces on bridge and vehicle are derived. In addition, the form selection of wind barriers, which are applied as the windbreak measures of newly-built railways in northwest China, is studied based on the suggested evaluation index, and the suitable values about height and porosity rate of wind barriers are studied. By taking a multi-span simply-supported box-girder bridge as a case study, the dynamic response of the bridge and the running safety indices of the train traveling on the bridge with and without wind barriers are calculated. The limit values of train speed with respect to different wind velocities are proposed according to the allowance values in the design code.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1503-1510
• /
• 2012

본 논문은 종/횡방향 충돌 회피 시스템의 통합을 통한 통합 위험 관리 시스템 (IRMS) 에 대하여 기술하였다. 이를 위하여 종/횡방향 충돌 위험을 나타낼 수 있는 지표가 개발되었으며, 이를 통하여 통합 제어 전략을 구성하였다. 충돌 회피 제어를 위하여 운전자-제어기-차량 시스템에 대한 선형 모델을 구성, 이를 바탕으로 운전자-제어기간 협력을 통한 충돌 회피 제어 알고리듬을 개발하였다. 개발된 통합 위험 관리 시스템은 차량 동역학 모의 시험 프로그램인 CARSIM 과 MATLAB/Simulink 를 연동, 모의시험을 통하여 성능을 확인하였다.