• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.91-100
• /
• 2013

This paper introduces an indoor sensor fusion wireless communication device which provides the Location Based Service (LBS) using fire prevention facility. The proposed system can provide information in real time by optimizing the hardware of Wi-Fi technology. The proposed system can be applied to a fire prevention facility (i.e., emergency exit) and provide information such as escape way, emergency exit location, and accident alarm to smart phone users, dedicated terminal holders, or other related organizations including guardians, which makes them respond instantly with lifesaving, emergency mobilization, etc. Also, the proposed system can be used as a composite fire detection sensor node with additional fire and motion detect sensors.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.413-420
• /
• 2016

The permanent magnet synchronous motor has high efficiency driving performance and high power density output characteristics compared with other motors. In addition, it has good regenerative operation characteristics during braking and deceleration driving condition. For this reason, permanent magnet synchronous motor is generally applied as a power train motor for electrical vehicle. In permanent magnet synchronous motor, the most probable causes of fault are demagnetization of rotor's permanent magnet and short of stator winding turn. Therefore, the demagnetization fault of permanent magnet and turn fault of stator winding should be detected quickly to reduce the risk of accident and to prevent the progress of breakdown of power train system. In this paper, the fault diagnosis method using high frequency low voltage injection was suggested to diagnose the demagnetization fault of rotor permanent magnet and the turn fault of stator winding. The proposed fault diagnosis method can be used to check the faults of permanent magnet synchronous motor during system check-up process at vehicle starting and idling stop mode. The feasibility and usefulness of the proposed method were verified by the finite element analysis.

• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.236-247
• /
• 2009

In Korea, the driving system restriction criteria is strictly applied(gross weight 400kN, axial load 100kN). Especially after the Seoungsu Bridge accident, safety factor has been strictly applied. The Safety factor is applied to the cumulative results for each steps like design, construction, maintenance of the Bridge. Because of it, the bridge is undervalued compared to its capacity. So, this generates loss for both private and military sector(eg. logistical delays, structural damage, etc.). But analyzing data from many existing researches we have confirmed that the military heavy vehicle may pass through the first class bridges. In consequence, this study have focused on determining whether HETS vehicles can pass over the first class bridge, without safety issues, using MIDAS structural analysis program. The results have confirmed that the military heavy vehicle may pass over the bridge.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.34-39
• /
• 2001

The median barrier is one of the roadside hardware to prevent severe human and property damage from highway traffic accidents. The foreign standard of concrete median barrier was introduced and implemented without modification fitting to domestic vehicle and highway condition. In a car accident, median barrier doesn't protect vehicle effectively, especially for heavy vehicle such as bus and heavy truck. The purpose of this study is to develop the optimal performance design of concrete median barrier using the design of experiment with crash simulation analysis which is done by Pam-Crash that is one of the commercial crash simulation software. As a result of this study, an optimal design of concrete median barrier is obtained considering von Mises stress, volume and COG acceleration of truck.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1817-1823
• /
• 2007

In this study, we have studied rail infrastructure related to emergency action to manage the risk when emergency caused by faults of facility or rail vehicle during operation happens. Especially we have compared the effect of emergency action with examining the structure of vehicle, tunnel, bridge and access road, etc which are related to emergency action. Also, we have tried to analyze effects of radio and communication equipment, lifesaving and refuge which could be used for rolling stock, station, control room, tunnel, bridge and etc, and we have presented the way of reporting the emergency to the train driver or crew, control room, outside networks which could be used by passengers in vehicle, station, railroad line. Based on these, we have analyzed the conduct of emergency action in length of time when emergency happens in railway and high-speed railway, and studied the method of which passengers could be guided safely and escape from the scene of the accident.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.169-173
• /
• 2011

Crash box is introduced to vehicle design to improve the impact performance and reduce the damage of vehicle body at impact speed. The crash box behind bumper can absorb impact energy effectively to improve vehicle safety. Repair cost at collision accident can be cut down by use of this box. The configuration of car body must be designed by considering the characteristic of material due to the deformation of car body happened at impact. Many papers have been published about material of crash box all over the world. The study of crash box with tube expansion type has been going on Korea. This study is done by the simulation analysis about front collisions against 5 kinds of aluminum crash boxes with the basic structure of square section.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.9-15
• /
• 2011

This study analyzed contributing factors affecting leg injury severity in pedestrian-vehicle crashes. A Binary Logistic Regression (BLR) method was used to identify the factors. Independent variables include characteristics for pedestrian, vehicle, road, and environmental conditions. The leg injury severity is classified into two classes, which are dependent variables in this study, such as 'severe' and 'minor' injuries. Pedestrian age, collision speed, and the height of vehicle were identified as significant factors for the leg injury. The probabilistic outcome of predicting leg injury severity can be effectively used in not only deriving pedestrian-related safety policies but also developing advanced vehicular technologies for pedestrian protection.

• 자동차안전학회지
• /
• 제7권1호
• /
• pp.40-44
• /
• 2015

In recent years, WorldSID dummy has been continuously developed and investigated to be a better represent biolfidelic ATD as well as a device for replacement of the current existing EuroSID-2. In Korea, the side impact accident is one of the major severe accidents in terms of numbers of accidents and fatality. Since 2003, 50kph 90degree side crash test has been initiated as a safety standard with EuroSID-1 at the first stage and also same time 55kph impact speed test has been conducted as a part of KNCAP program. Currently only EuroSID-2 is accepted as a regulatory tool for vehicle certification and KNCAP. In order to make use of WorldSID of KNCAP in the distant futuer the tests with WorldSID is conducted experimentally.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1235-1242
• /
• 2009

The Emergency Exit System is evacuation equipment that operated by crew or passenger when emergency state such as fire, accident, etc in the rolling stock. Generally front emergency exit is installed in the drivers area and it is isolated to passenger area, so its design is little big easy. But front emergency exit that is installed in driverless vehicle have to consider not only anti-vandalism and failure but also its design because it is installed in the passenger area. Therefore, we survey the characteristic, function and needed condition the emergency front exit of driverless vehicle and present the developing system that can be a help to make design.

• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.12-18
• /
• 2000

This paper addresses the experimental study on the nonlinear critical speed and the validity of simple prediction formulation. The experiment on nonlinear critical speed is carried out using roller rigs, which has been impossible on track because of a possibility of an accident. In addition, experiment for a bogie is performed to check the difference in modeling a full railway vehicle and a bogie. It is found that nonlinear critical speed proves to be an inherent phenomenon of a railway vehicle itself and the difference of test results between a full railway vehicle and a bogie is comparatively negligible. Finally. the accuracy of simple prediction formulation for outbreak velocity and response frequency in hunting is investigated.