• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3475-3496
• /
• 2018

Most of current watermarking algorithms for GIS vector data embed copyright information by means of modifying the coordinate values, which will do harm to its quality and accuracy. To preserve the fidelity of vector line data and protect its copyright at the same time, a lossless watermarking algorithm is proposed based on storage feature in this paper. Firstly, the superiority of embedding watermark based on storage feature is demonstrated theoretically and technically. Then, the basic concepts and operations on storage feature have been defined including length and angle of the polyline feature. In the process of embedding watermark, the watermark information is embedded into directions of polyline feature by the quantitative mechanism, while the positions of embedding watermark are determined by the feature length. Hence, the watermark can be extracted by the same geometric features without original data or watermark. Finally, experiments have been conducted to show that coordinate values remain unchanged after embedding watermark. Moreover, experimental results are presented to illustrate the effectiveness of the method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.966-973
• /
• 2011

Power distribution onboard vessel is typically configured as ungrounded system due to the ability to continuously supply electric power even when an earth fault occurs. The impedance connections between 3 phase power lines and hull cause the line-to-hull voltages to become unstable and increased in case the impedances are unbalanced, bringing the situation susceptible to electric shock and deterioration of insulation material. Also the line-to-hull voltage can reach to a certain maximum value in the steady state depending on the distributed capacitances and grounding resistances between lines and hull. This study suggests how to find and calculate the maximum line-to-hull voltage in view of magnitude and phase angle based on the vector diagram.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.298-301
• /
• 2008

벡터 그래픽스는 수학적 정보를 이용하여 이미지를 표현하기 때문에 이미지 손상 없이 쉽게 확대 축소가 가능하며, 비트맵 방식으로 표현되는 이미지보다 더 작은 파일 크기를 가진다. 본 논문에서 제안하는 벡터 그래픽 래스터라이저는 개선된 스캔라인 엣지 플래그 방식을 사용하여 설계되었으며 클리핑과 슈퍼샘플링 과정을 같이 수행한다. OpenVG 2D 벡터 이미지를 사용하여 검증되었다. 본 논문에서 제안하는 가속기는 Tiger image의 랜더링에 초당 5 프레임의 성능을 가진다.

• 전력전자학회논문지
• /
• 제5권1호
• /
• pp.88-94
• /
• 2000

본 논문에서는 벡터제어용 유도전동기에 대한 파라미터 추정기법을 제시하였다. 이 제어기법은 실제 운전시의 상태와 동일한 조건하에 추정하므로 고성능의 토크제어가 요구되는 연속공정라인과 같은 산업현장에 용이하게 적용할 수 있다. 또한 출력전압의 추정에 의해 전압센서와 측정장치 같은 부가적인 하드웨어가 필요치 않으며, 추정오차에 대한 고정자 전압의 변동을 관찰함으로써 정확하고 매우 안정적인 추정값을 얻는다. 제안된 기법의 타당성 및 유용성은 모의시험장치와 실제 현장라인의 적용을 통하여 입증하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권1호
• /
• pp.66-66
• /
• 2004

Observability of two spacecraft system is considered with relative line-of-sight vector measurements between two spacecraft system for autonomous navigation using the linear observability analysis. First, the dynamical equations and measurement models are introduced, and the basic assumption of attitude knowledge for one of two spacecrafts is explained. Then, we introduce a pair of nominal orbits of two spacecraft system, and the observability analysis for the nominal orbits is presented with the available measurements (for the numerical observability analysis). (omitted)

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.346-352
• /
• 1998

본 논문에서는 새로운 신경 회로망 유도 전동기 속도 추정 방법을 제안하고, 추정된 속도를 이용하여 속도 센서리스 벡터 제어를 구현한다. 제안된 신경 회로망 속도 추정 방법은 정상 상태뿐 아니라 과도 상태에서도 정확한 속도를 추정한다. 또한 off-line에 의해 사전 학습을 필요로 하지 않고, 유도 전동기의 구동과 동시에 on-line 학습을 통하여 속도를 실시간으로 추정함으로써 구현이 용이하다. 디지털 시뮬레이션과 2.2kW 유도 전동기 시스템을 이용한 실험을 통하여 제안된 알고리즘의 효용성과 성능을 입증한다.

• ETRI Journal
• /
• 제30권5호
• /
• pp.738-740
• /
• 2008

In this paper, block constrained trellis coded vector quantization (BC-TCVQ) is presented for quantizing the line spectrum frequency parameters of the wideband speech codec. Both a predictive structure and a safety-net concept are combined into BC-TCVQ to develop the predictive BC-TCVQ. The performance of this quantization is compared with that of the linear predictive coding vector quantizer used in the AMRWB codec, demonstrating reductions in spectral distortion.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.465-471
• /
• 2007

The one step type pole and two step type pole are used in KEPCO's distribution system. The neutral current increases in three-phase four-wire distribution system due to unbalanced load. Usually, power line and communication line are installed at contiguity by effect of topography in Korea. To this end, the damages such as electrostatic induction, electromagnetic induction and harmonic induction generated by induced voltage and current are occured in power line and communication line. This paper calculates the neutral current in KEPCO's distribution system using EMTP by composing various simulated conditions. Also, these results are verified by vector analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5078-5094
• /
• 2019

In recent years, the development of drone technologies has promoted the widespread commercial application of drones. However, the ability of drone to carry explosives and other destructive materials may bring serious threats to public safety. In order to reduce these threats from illegal drones, acoustic feature extraction and classification technologies are introduced for drone sound identification. In this paper, we introduce the acoustic feature vector extraction method of harmonic line association (HLA), and subband power feature extraction based on wavelet packet transform (WPT). We propose a feature vector extraction method based on combined HLA and WPT to extract more sophisticated characteristics of sound. Moreover, to identify drone sounds, support vector machine (SVM) classification with the optimized parameter by genetic algorithm (GA) is employed based on the extracted feature vector. Four drones' sounds and other kinds of sounds existing in outdoor environment are used to evaluate the performance of the proposed method. The experimental results show that with the proposed method, identification probability can achieve up to 100 % in trials, and robustness against noise is also significantly improved.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2258-2271
• /
• 2016

In this paper, some crucial performance characteristics related to the operational reliability of the post-fault Pulse Width Modulated (PWM) rectifiers, such as line current harmonic distortion, Common Mode Voltage (CMV), and current stress on the capacitors, are fully investigated. The aforementioned performance characteristics of post-fault rectifiers are highly dependent on the utilized space vector modulation (SVM) schemes, which are also examined. Detailed analyses of the three most commonly used SVM schemes for post-fault PWM rectifiers are provided, revealing the major differences in terms of the zero vector synthesis approaches. To compare the performances of the three SVM schemes, the operating principles of a post-fault rectifier are presented with various SVM schemes. Using analytical and numerical methods in the time domain, the performances of the line current distortion, common mode voltage and capacitor current are evaluated and compared for each SVM scheme. The proposed analysis demonstrates that the zero vector synthesis approaches of the considered methods have significant impacts on the performance characteristics of rectifiers. In addition, the advantages and disadvantages of the proposed SVM schemes are discussed. The experimental results verify the effectiveness and validity of the proposed analysis.