• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1126-1129
• /
• 2000

The equivalent transformation of a brushless DC motor into an separately exited DC motor has been possible with the vector control technique. Vector control is an effective technique for controlling variable speed drives of brushless DC motors. Conventional vector controllers, however, suffer from electrical machine parameter variations because these controllers depend on the parameters. This paper presents the vector control of brushless DC motor using a neural network. In the proposed method, a neural network is employed as on-line estimator of the nonlinear dynamic equations of brushless DC motor. The neural network based vector controller has the advantage of robustness against machine parameter variations as compared with conventional vector controller The simulation results using Matlab/Simulink verify the useful of the proposed method.

• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.3-10
• /
• 2003

Application of matrix converter to vector control of induction motor using simplified Venturini algorithm which is capable of achieving the maximum output voltage is developed. This algorithm simplifies the control algorithm and therefor reduces the digital implementation time. Matrix converter is used as voltage-referenced voltage fed vector controlled induction motor drive. This paper describes the performance of vector controlled induction motor with four quadrant capability employing a matrix converter power circuit. The advantage of this system over the conventional rectifier-inverter arrangement are capability for regeneration into the utility, sinusoidal supply currents and minimum passive components. The steady-state and transient performance of the induction motor drive under the vector control technique is demonstrate with simulation and experiment results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.156-160
• /
• 1997

This paper proposed the vector controller of induction motors using one chip microprocessor. For developing a small and cheep speed control system, we use the one chip microprocessor 80C196MC. By using the one chip microprocessor we can make an inexpensive and small-sized vector controller for induction motors. We apply indirect vector control method and space vector modulation method to this system. The experimental results show that the proposed inverter has high performance features.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.807-811
• /
• 2003

In this paper, the speed control system of induction motor was proposed using vector control algorithm and space voltage vector PWM method to improve the dynamic performance of Induction motor. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM technique. The high-speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor and IGBT module. The proposed scheme is verified through digital simulations and experiments for 3.7[kw] induction motor and shows good dynamic performance.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.86-93
• /
• 2013

This paper proposes the used of genetic algorithm for optimizing PI controller and describes the dynamic modeling simulation for the permanent magnet synchronous motor driven by simplified vector control with the aid of MATLAB-Simulink environment. Furthermore, three kinds of error criterion minimization, integral absolute error, integral square error, and integral time absolute error, are used as objective function in the genetic algorithm. The modeling procedures and simulation results are described and presented in this paper. Computer simulation results indicate that the genetic algorithm was able to optimize the PI controller and gives good control performance of the system. Moreover, simplified vector control on permanent magnet synchronous motor does not need to regulate the direct axis component current. This makes simplified vector control of the permanent magnet synchronous motor very useful for some special applications that need simple control structure and low cost performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.644-646
• /
• 2000

An induction motor can be controlled like a separately excited do motor by field oriented control(or vector control). In vector control, Because the transformation of the stator's 3-phase current into two orthogonal current is required. the control scheme is complicated. But, Yamamura proposed a field acceleration method(FAM) without the phase transformation. FAM simplify an implementation control scheme for induction motors. In this paper, the analysis of transient phenomena of a squirrel-cage induction motor was achieved by the spiral vector method and the phase segregation method. It simplified control schemes more than those of vector control.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.288-295
• /
• 1999

This paper presents an application of vector control strategy for 1.2MVA IGBT traction drive for electric railway vehicle. The vector control requires the control of the phase and amplitude of output voltage vector[5]. But in case of traction system far railway vehicle, the one-pulse mode is used in order to utilize the link voltage fully[8]. So it is impossible to control the flux axis current and the torque axis current instantaneously and independently. So this paper proposes the vector control strategy with slip-frequency control at one-pulse mode. And precise switching technique between the two different control structures has been proposed. And the strategy was verified by experimental result with 1.2MVA IGBT inverter with four 210㎾ induction motors.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.1006-1008
• /
• 2013

A novel recombinant baculovirus vector system containing coding genes for polyhedron promoter, vesicular stomatitis virus G (VSVG), polyA, cytomegalovirus (CMV) promoter, enhanced green fluorescent protein (EGFP), and protein transduction domain (PTD) was constructed. We applied this recombinant baculovirus vector into cells and murine tissues and compared efficacy of gene transfer and expression of this recombinant baculovirus vector system with control vector system. From this result, we confirmed that this novel recombinant baculovirus vector system was very effective than control vector system.

• Parasites, Hosts and Diseases
• /
• 제59권4호
• /
• pp.377-392
• /
• 2021

This paper is to illustrate the infestation and related ecological characteristics of chigger mites on the Asian house rat (Rattus tanezumi). A total of 17,221 chigger mites were collected from 2,761 R. tanezumi rats, and then identified as 131 species and 19 genera in 2 families. Leptotrombidium deliense, the most powerful vector of scrub typhus in China, was the first major dominant species on R. tanezumi. All the dominant mite species were of an aggregated distribution among different individuals of R. tanezumi. The species composition and infestations of chiggers on R. tanezumi varied along different geographical regions, habitats and altitudes. The species-abundance distribution of the chigger mite community was successfully fitted and the theoretical curve equation was ${\hat{S}}(R)={37e^{-(0.28R)}}^2$. The total chigger species on R. tanezumi were estimated to be 199 species or 234 species, and this further suggested that R. tanezumi has a great potential to harbor abundant species of chigger mites. The results of the species-plot relationship indicated that the chig-ger mite community on R. tanezumi in Yunnan was an uneven community with very high heterogeneity. Wide geographi-cal regions with large host samples are recommended in the investigations of chigger mites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2777-2781
• /
• 2001

This paper presents an algorithm of the watermark insertion and extraction on the vector image. Most parts of the vector image consist of the array of the coordinate values. The vector watermarking method by Sakamoto et al [1] uses the mask within which all the coordinate values of all the vertices are changed depending on the value of the watermark. The proposed algorithm is the change of the vector image file instead of the change of the coordinate values on the vector image. We use the Drawing Exchange Format (DXF) files since the DXF file is one of the general files in the field of the vector image.