• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1065-1066
• /
• 2006

The aging behavior of sintered Al composites with various ceramic contents was investigated. 2xxx series blended powder was used as the starting powder. Ceramic contents were 0wt.% and 5wt.%. The blended powders were compacted at 250MPa. The sintering process was performed at $620^{\circ}C$ for 60min in a $N_2$ atmosphere. Each part was solution-treated at $518^{\circ}C$ for 60min and aged at $180^{\circ}C$. The Rockwell hardness at the peak aging time increased with ceramic contents. However, the peak aging time at maximum hardness was reduced with increased ceramic contents.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.311-322
• /
• 2013

High-Cr martensitic steel HT-9 is one of the candidate materials for advanced nuclear energy systems. Thanks to its excellent thermal conductivity and irradiation resistance, ferritic/martensitic steels such as HT-9 are considered for in-core applications of advanced nuclear reactors. The harsh neutron irradiation environments at the reactor core region pose a unique challenge for structural and cladding materials. Microstructural and microchemical changes resulting from displacement damage are anticipated for structural materials after prolonged neutron exposure. Consequently, various irradiation effects on the service performance of in-core materials need to be understood. In this work, the fundamentals of radiation damage and irradiation effects of the HT-9 martensitic steel are reviewed. The objective of this paper is to provide a background introduction of displacement damage, microstructural evolution, and subsequent effects on mechanical properties of the HT-9 martensitic steel under neutron irradiations. Mechanical test results of the irradiated HT-9 steel obtained from previous fast reactor and fusion programs are summarized along with the information of irradiated microstructure. This review can serve as a starting point for additional investigations on the in-core applications of ferritic/martensitic steels in advanced nuclear reactors.

• 공업화학
• /
• 제8권2호
• /
• pp.292-300
• /
• 1997

본 연구에서는 출발물질을 변화시켜 입방체의 PZT(Lead Zirconate Titanate) 분말을 수열합성법으로 제조하였으며 합성된 분말을 이용하여 소결특성을 조사하였다. 출발물질에 관계없이 입방체 형태를 갖는 PZT 결정분말이 형성되었으나 $Pb(NO_3)_2$, $Ti(OC_4H_9)_4$와 $Zr(OC_4H_9)_4$을 출발물질로 사용한 경우 다른 여러 출발물질을 사용한 경우보다 상대적으로 작은 입자가 생성되었다. 수열합성시 교반을 시키면서 합성한 경우 교반없이 반응시킨 경우에 비해 핵생성을 위한 수열 반응온도가 낮아졌으며 상대적으로 입경이 큰 입자들의 수가 늘어났다. Zr대Ti의 조성비를 변화시켜 수열합성한 반응물을 XRD 분석한 결과, 조성비가 40대60인 경우 정방정상이 주상(major phase)으로 형성되었으며 조성비가 60대40인 경우에는 주상의 결정형이 능면체정상으로 바뀌었다. 여러 조건에서 합성된 PZT 분말을 PbO 분위기에서 소결시키면서 소결온도 및 소결시간 변화에 따른 소결밀도의 변화를 분컥하였으며, $1150^{\circ}C$에서 2시간 소결시켰을 때 최적의 소결밀도, $7.6g/cm^3$을 갖는 소결체가 제조되었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.97-98
• /
• 2006

After general introduction for hyperbranched polymers, hyperbranched polysiloxysilanes (HBPS) were introduced as new functional polymers. Vinyl terminated HBPS was synthesized starting from AB2 type monomer by hydrosilylation reaction. Vinyl group can be converted various functional groups such as carboxylic acid and alcohol. HBPS had strong interaction to inorganic surface. As an example of this phenomenon, silica gel bead for HPLC was modified with thermo sensitive polymers. The resulting bead was successfully applied to Green Chronatography.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.153-159
• /
• 1991

Polymeric alumina sol and polymeric silica sol were synthesized from aluminum sec-butoxide and tetraethyl orthosilicate, respectively as starting materials. A clear mullite sol was obtained by mixing these sols. When the mullite sol had a proper viscosity which was dependent on drying time, the fibers were fabricated by spinning. The optimum viscosity for fabrication of mullite fibers was 103-104 cps, and the fibers with various sizeswere made using the sols. The mullite was a major phase of the calcined fibers and the diameters of the fibers were about 50$\mu\textrm{m}$.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.795-801
• /
• 1989

The polycrystalline mullite fiber was synthesized from various combination of starting materials including metal alkoxides and colloidal sol by the sol-gel process. The best spinnability was observed in the sol which showed shear thinning and hysteresis (i.e., thixotropic flow), indicating that the network structure was broken down as the shear rate increased. The mullite fiber was polycrystalline after firing and characterized by thermal analysis, XRD, FT-IR spectroscopy, rheological measurements, and SEM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.481-483
• /
• 1998

The problem of production of new materials based on polyheteroarylenes and other polymers combining good mechanical and dielectric properties. radiation and chemical stability with heat- and thermal stability is related with the development of efficient synthesis technique of starting low-molecular compounds. Alicyclic dianhydrides are believed to be the promising monomers to synthesize various polymers.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.755-760
• /
• 1996

Sol-gel processing was used to prepare PZT fibers. Titanium isopropoxide Zirconium n-butoxide and lead acetate trihydrate were used as starting materials and TEA(triethanolamine) was added to form stabilized Pb-Ti-Zr complex alkoxide, Effects of catalysts and various solvents on the state of precursor sol gelation reaction fiber spinnability pyrolysis and crystallization were also investiated.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.288-295
• /
• 2015

The present work addresses crevice and galvanic corrosion processes occurring at the cylinder head gasket/cylinder head interface and cylinder head gasket/cylinder liner interface of four-stroke medium-speed diesel engines for marine applications. The contact between these systems and the marine environment can promote formation of demanding corrosion conditions, therefore influencing the lifetime of the engine components. The electrochemical behavior of various metals and alloys used as head gasket materials (both ferrous alloys and copper alloys) was investigated. The efficacy of corrosion inhibitors was determined by comparing electrochemical behavior with and without inhibitors. In particular, crevice corrosion has been investigated by electrochemical tests using an experimental set-up developed starting from the requirements of the ASTM G-192-08, with adaptation of the test to the conditions peculiar to this application. In addition to the crevice corrosion resistance, the possible problems of galvanic coupling, as well as corrosive reactivity, were evaluated using electrochemical tests, such as potentiodynamic measurements. It was possible to quantify, in several cases, the corrosion resistance of the various coupled materials, and in particular the resistance to crevice corrosion, providing a basis for the selection of materials for this specific application.

• East Asian mathematical journal
• /
• 제37권4호
• /
• pp.443-460
• /
• 2021

This study analyzes the characteristics of elementary math gifted classes through the development and application of teaching and learning materials. We used the guided reinvention methods including quasi-experiential perspectives. To this end, the applicability of Lakatos' quasi-empirical mathematical philosophy in elementary mathematics was examined, and the criteria for the development of teaching and learning materials for gifted students were presented, and then this study was conducted in this theoretical background. The subjects of the study were 21 elementary students at P University's Institute of Science and Gifted Education, and non-face-to-face real-time classes were conducted. Classes were divided into introduction, deployment1, deployment2, organization stages, and in each stage, small group cooperative learning was conducted based on group activities, and in this process, the characteristics of elementary mathematics gifted were analyzed. As a result of the study, elementary mathematics gifted students did not clearly present the essence of justification in the addition algorithm of fractions, but presented various interpretations of 'wrong' mathematics. They also showed their ingenuity in the process of spontaneously developing 'wrong' mathematics. On the other hand, by taking interest in new mathematics starting from 'wrong' mathematics, negative perceptions about it could be improved positively. It is expected that the development of teaching and learning materials dealing with various and original topics for the gifted students in elementary school will proceed through follow-up research.