• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.69-75
• /
• 2009

The effects of welding speed were investigated on penetration characteristics, defects and mechanical properties including formability test in Nd:YAG laser welded 1000MPa grade DP steels. A shielding gas was not used and bead-on-plate welding was performed with various welding speeds at 3.5kW laser power. Defects of surface and inner beads were not observed in all welding speeds. As the welding speed increased, the weld cross-section varied from the trapezoid having wider bottom bead, through X type, finally to V type in partial penetration range of welding speeds. The characteristic of hardness distribution was also investigated. The center of HAZ had maximum hardness, followed by a slight decrease of hardness as approaching to FZ. Significant softening occurred at the HAZ near BM. Regardless of the welding speed, the weld showed approximately the same hardness distribution. In the perpendicular tensile test with respect to the weld direction, all specimens were fractured at the softening zone. In the parallel tensile test to the weld direction, the first crack occurred at weld center and then propagated into the weld. Good formability over 80% was taken for all welding conditions.

• 대한전자공학회논문지TC
• /
• 제43권10호
• /
• pp.69-78
• /
• 2006

채널환경에 따라 변조방식이 가변되는 적응변조에 의해 높은 대역효율을 얻을 수 있다. 그러므로 시간에 따라 채널이 바뀌는 이동통신 채널에는 특히 적응변조가 적합하다. 이동체의 속도에 따라 적절하게 변조방법을 바꾸기 위해서는 신호대 잡음비의 최적 문턱값을 결정하여야 한다. 따라서 본 논문에서는 특정 이동체의 속도에 대하여 터보부호를 사용할 경우 요구 비트오율 $10^{-6}$을 얻을 수 있는 최적 문턱값을 결정한다. 이를 바탕으로 보간법에 의해서 이동체의 연속적인 속도에 대한 최적 문턱값을 제안한다. 그리고 다양한 이동체의 속도와 채널환경에 대해 그 오류성능 및 대역효율을 분석한다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• 대한공간정보학회지
• /
• 제20권3호
• /
• pp.19-27
• /
• 2012

바람은 기상, 기후, 신재생 에너지 등 다양한 분야에서 널리 활용되는 매우 중요한 요소 중 하나이다. 이 연구에서는 우선, 중규모 기상모델 WRF를 이용하여 우리나라의 전역에 대하여 2006년도를 대상으로 수치 시뮬레이션을 수행하여, 시공간적 상세 바람정보를 생산하였다. 수치모의 된 풍속은 관측풍속과 비교하여 공간적 및 계절적 특징을 비교적 잘 나타내었으나, 전반적으로 다소 과대 모의되는 경향을 보였다. 이러한 예측오차를 줄이기 위하여, 위성원격탐사로부터 생산된 지표특성 변수인 LST와 NDWI를 사용한 예측풍속의 통계적 보정 알고리즘을 개발하고, 다중회귀분석에 의하여 보정식의 토지피복별 상수와 계수를 도출하였다. 제안된 보정 알고리즘에 의하여 최종적으로 보정된 풍속은 관측풍속과 비교하여 높은 상관관계, 0.4 m/s 미만의 RMSE, 0에 가까운 BIAS로 매우 높은 일치성을 보였다. 따라서, 이 연구에서 제안한 위성원격탐사자료를 활용한 통계적 보정 알고리즘은 중규모 수치모의에 의한 예측오차를 개선하고 보다 정확한 한반도 바람정보를 생산하는데 있어서 간략하고 유용한 수단이 될 수 있으리라 기대된다.

• KSBB Journal
• /
• 제21권2호
• /
• pp.123-128
• /
• 2006

황기의 형질전환된 모상근으로부터 약리물질인 astragalosides I, II, 그리고 III을 효율적으로 생산하기 위하여 다양한 물리화학적 조건들 즉, 배지, 초기 당농도, 교반속도, 초기 접종농도, 광조사, 그리고 chitosan 처리에 한 elicitation 효과를 조사 하였다. 선발된 AG-04 clone의 성장과 astragalosides의 함량은 4종의 배지들 중 SH배지에서 가장 좋았으며, 배지에 첨가하는 초기 당 농도는 3%와 6%에서 각기 건물중과 astragalosides의 함량이 가장 높게 나타났다. 또한, 초기 접종량은 50 ml 배지에 500 mg(FRW)씩을 주입하는게 가장 효과적이었으며, 18시간 광조사가 되는 Shaking incubator에서 90 rpm과 120으로 교반시켰을 때 모상근의 성장과 astargalosides의 함량이 높게 나타났다. 배양 2주 후 chitosan의 처리는 모상근의 성장에는 크게 영향을 미치지 않았으나, 100 mg/L 처리구에서 대조구의 약 2.1배의 astragalosides 함량 증가를 가져왔다. 이와같은 연구결과는 황기의 대량배양을 통한 saponins 생산 연구에 효율적으로 활용될 수 있을 것으로 본다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.189-195
• /
• 2007

The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

• Earthquakes and Structures
• /
• 제26권1호
• /
• pp.31-48
• /
• 2024

In order to get a better understanding of seismic performance of exterior beam-column joint, reciprocating loading tests with variable loading speeds or axial forces were carried out. The main findings indicate that only few cracks exist on the surface of the joint core area, while the plastic hinge region at the beam end is seriously damaged. The damage of the specimen is more serious with the increase of the upper limit of variable axial force. The deflection ductility coefficient of specimen decreases to various degrees after the upper limit of variable axial force increases. In addition, the higher the loading speed is, the lower the deflection ductility coefficient of the specimen is. The stiffness of the specimen decreases as the upper limit of variable axial force or the loading speed increase. Compared to the influence of variable axial force, the influence of the loading speed on the stiffness degradation of the specimen is more obvious. The cumulative energy dissipation and the equivalent viscous damping coefficient of specimen decrease with the increase of loading speed. The influence of variable axial force on the energy dissipation of specimen varies under different loading speeds. Based on the truss model, the biaxial stress criterion, the Rankine criterion, the Kent-Scott-Park model, the equivalent theorem of shearing stress, the softened strut-and-tie model, the controlled slip theory and the proposed equations, a calculation method for the shear capacity is proposed with satisfactory prediction results.

• 한국국방경영분석학회지
• /
• 제7권1호
• /
• pp.81-117
• /
• 1981

Mathematical models for hit probabilities of small arms are developed in order to estimate the expected hits on an aircraft for certain altitudes and air speeds. A model for the firing lead angle is developed for cases when the distribution of hits is normal and the firing angle is from 20 degrees to 160 degrees. probabilities of hit for single and multiple shots at various altitudes are calculated. Tables are given showing the probability of hits and kill for targets flying at high speed above 500 feet from ground level.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.650-653
• /
• 2002

The increaseing speeds are accompanied by decreases in pulse rise and fall time in VLSI circuits. These accenturate the high frequency spectral contents of the signals and cause the frequency dependent loss of the conductors which interconnect the various sub-circuits composing of VLSI circuit. The lossy effect is approximated by the square root of frequency dependence of the per unit length resistance. In the practical applications, several problems may arise along with this approximation, so we extend our investigation of the lossy effect by numerical Laplace inversion method.