• Title/Summary/Keyword: Variation Rate of C.G.

Search Result 146, Processing Time 0.033 seconds

Effects of nitrogen doping on mechanical and tribological properties of thick tetrahedral amorphous carbon (ta-C) coatings (질소 첨가된 ta-C 후막코팅의 기계 및 트라이볼로지적 특성연구)

  • Gang, Yong-Jin;Jang, Yeong-Jun;Kim, Jong-Guk
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2016.11a
    • /
    • pp.156-156
    • /
    • 2016
  • The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

  • PDF

Relationship of the Clearance Rate and Nonylphenol Uptake Rate of Three Bivalve Species with Different Size Classes and Temperatures (이매패류 3종의 크기 및 수온에 따른 여수율과 노닐페놀 흡수율의 관계)

  • Yang, Songyi;Lee, Jong Hyeon;Lee, Byeong Gweon
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.18 no.2
    • /
    • pp.80-88
    • /
    • 2013
  • The present study was conducted to evaluate relationship between nonylphenol uptake rate and clearance rate of Ruditapes philippinarum, Corbicula japonica and Mytilus edulis. Variation of the temperature and body size of the bivalves was used to modulate clearance rate and nonylphenol uptake rate in this experiment. Clearance rate and nonylphenol uptake rate experiments were determined for two different size classes of the bivalves (R. philippinarum: 0.35, 0.73 g, C. japonica : 0.047, 0.1000g, M. edulis: 0.30, 0.37 g; mean flesh dry weight) and three different temperature regime (5, 13 and $18^{\circ}C$). Weight-specific clearance rate in all animal size and temperature ranges increased in the order of R. philippinarum, C. japonica and M. edulis. The weight-specific nonylphenol uptake rate did not show specific trend among species. The clearance rate and nonylphenol uptake rate generally decreased with animal size and increased with water temperature. For all three species nonylphenol uptake rate had a strong relationship with clearance rate. For a given clearance rate ranges, the nonylphenol uptake rate was in the order of R. philippinarum > C. japonica > M. edulis. The results suggest that water ventilation capacity of filter-feeding organisms is an important physiological factor controlling uptake rate of dissolved nonylphenol.

Stability Analysis of Three-Loop Autopilot with respect to IMU Position and C.G Variation Rate in Guided Missiles (IMU 탑재 위치 및 유도탄 무게 중심 변화율에 따른 Three-Loop 조종 알고리듬 안정성 분석)

  • Kwon, Hyuck-Hoon;Kim, Yoon-Hwan;Park, Bong-Gyun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.6
    • /
    • pp.492-501
    • /
    • 2016
  • Three-Loop autopilot is generally used for the acceleration control of guided missiles. Because the acceleration command to the three-loop autopilot is given as values at the center of gravity, feedback information of IMU should be obtained at the same position. However, the position of IMU might not be located at the center of gravity due to the sub-system assignment. This paper presents the stability analysis of three-loop autopilot with respect to the arbitrary position of IMU and variation rate of center of gravity. Gain and phase margins are calculated for several trim points for general anti-tank missiles.

Electrical Properties of ZnO Varistors with Variation of Co3O4 (Co3O4 첨가량 변화에 따른 ZnO Varistor의 전기적 특성)

  • Cho, Hyun-Moo;Lee, Sung-Gap
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.11
    • /
    • pp.1186-1191
    • /
    • 2004
  • ZnO varistor ceramics which were fabricated with variation of added of 0.5~1.0 mol% Co$_3$O$_4$, were sintered at 1150 $^{\circ}C$. In the specimen added 0.7 mol% Co$_3$O$_4$, sintered density was 6.03 g/㎤ and electrical properties were superior to any other compositions. The nonlinear coefficient a and clamping voltage ratio were 83 and 1.35, respectively. But, endurance surge current in the specimen added 0.5 mol% Co$_3$O$_4$ was 7000 A/$\textrm{cm}^2$, and deviation of varistor voltage was Δ-3.23 %. As P.C.T and T.C.T environmental test were succeed in all specimens, and deviation of varistor voltage in the specimen added 0.6 mol% Co$_3$O$_4$ was Δ-0.81 %. All specimens showed good leakage current property on the High Temperature Continuous Load Test(HTCLT) for 1000 hr at 85 $^{\circ}C$ and variation rate of the varistor voltage below Δ-2.0 %.

Interspecific Variation in the Protoplast Formation of the Genus Cellulomonas (Cellulomonas속 종간의 원형질체 형성조건의 차이에 대하여)

  • Lee, Eun-Ju;Bae, Moo
    • Korean Journal of Microbiology
    • /
    • v.24 no.2
    • /
    • pp.154-160
    • /
    • 1986
  • In order to develope interspecific fusion of the genus Cellulomonas capable of assimilation cellulose, the optimun conditions for the protoplast formation was investigated to examine the susceptibility of cell wall, between different species of the same genus using scanning electron microscope. The variation in the susceptibilities of Cellulomonas sp. CS 1-1 and C. flavigena to lysozyme treatment were considerably remarkable, although they belong to the same genus. The rate of protoplast formation of CS1-1 was 99.9% being treated with lysozyme $(100{\mu}g/ml)$ for 30 minute and that of C. flavigena was about 80% being treated at the concentration of $600{\mu}g/ml$ of lysozyme for 6 hours. The susceptibility of cell wall to the lysozyme treatment on protoplast formation of the strain, CS1-1 seems not to be depend on the cultural periods of cells. On the contrary, that of C. flavigena was considerably depend on the periods. Cells of C. flavigena at mid exponential phase could be more efficiently converted to protoplast cells than those at late exponential phase be done. The rate of the protoplast formation was 95%, when cells of C. flavigena at mid exponential phase were treated with lysozyme $600{\mu}g/ml$ for 6 hours and observed by SEM. In the evalution of protoplast formation of the CS1-1 results of counting method in plate after osmotic shock treatment were similar to the results of the direct observation method by means of SEM. But in the case of C. flavigena the latter method was much more reliable than the former, because the differences between the number of spheroplasts and protoplasts were not able to figure out on conuting the number of protoplast after osmotic shock tretment.

  • PDF

Electrical Properties of ZnO Varistors with variation of $Nb_2O_5$ ($Nb_2O_5$ 첨가에 따른 바리스터의 전기적 특성)

  • Cho, Hyun-Moo;Lee, Sung-Gap
    • Proceedings of the KIEE Conference
    • /
    • 2004.11a
    • /
    • pp.67-69
    • /
    • 2004
  • ZnO varistor ceramics which were fabricated with variation of added of 0.01, 0.02, 0.03, 0.05, 0.1mol% $Nb_2O_5$ sintered at $1150^{\circ}C$. In the specimen added 0.05mol% $Nb_2O_5$, sintered density was $5.87g/cm^3$ and electrical properties were superior to any other components. The nonlinear coefficient was 75, and clamping voltage ratio was 1.40. And, endurance surge current in the specimen added 0.05mol% $Nb_2O_5$ was $6500A/cm^2$, and deviation of varistor voltage was -1.7%. As P.C.T and T.C.T environment test were succeed in all specimens, and deviation of varistor voltage in the specimen added 0.3mol% $Nb_2O_5$ was -0.81%. All specimens showed a good leakage current property in the High Temperature Continuous Load Test for 1000hr, at $85^{\circ}C$, and variation rate of the varistor voltage was -1.71%.

  • PDF

The Performance Evaluation of Plate Type STR Reactor with Variation of S/C Ratio and Fuel Supply (연료 공급 및 S/C비에 따른 평판형 STR 반응기 성능 평가)

  • Kim, Hun-Ju;Heo, Su-Bin;Park, Jae-Min;Yoon, Bong-Seok;Lee, Do-Hyung
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.22 no.2
    • /
    • pp.191-198
    • /
    • 2011
  • According to the propagation of fuel cell system, the importance of that system efficiency is being magnified. Thus, the efficiency improvement of reformer which is the important factor of fuel cell system will be required. This study has been experimentally performed to evaluated the performance of plate type STR reactor. At first, we changed fuel flow rate (2, 3 and 4 l/min) in burner, and then we measured a proportion of hydrogen in produced gas through the STR reactor by G.C for evaluating the performance of plate type STR reactor in various fuel supply conditions. And we changed S/C ratio (2 and 4) and measured a proportion of hydrogen in produced gas through the STR reactor. As a results, condition at fuel flow rate 2 and 3 l/min could not be supplied amount of heat for STR sufficiently. Condition at fuel flow rate 4 l/min could supplied a heat excessively. And condition at S/C ratio 2, reaction occurred insufficiency. But condition at S/C ratio 4 was excess. From above, we found the optimum conditions that were fuel rate 3.5 l/min and S/C ratio 3.

Effects of Temperature, Food Concentration, and Shell Size on Filtering Rate and Pseudofeces Production of Unio douglasiae on Microcystis aeruginosa (수온, 먹이농도, 패각 크기가 Microcystis aeruginosa에 대한 말조개의 여과율 및 배설물 생산에 미치는 영향)

  • Lee, Yeon-Ju;Kim, Baik-Ho;Kim, Nan-Young;Um, Han-Yong;Hwang, Soon-Jin
    • Korean Journal of Ecology and Environment
    • /
    • v.41 no.spc
    • /
    • pp.61-67
    • /
    • 2008
  • This study was conducted to evaluate filtering rate (FR) and pseudofeces production (PFP) of a freshwater filter-feeding bivalve, Unio douglasiae, on a toxic cyanobacterium (Microcystis aeruginosa). The experiments were conducted under the various conditions of water temperature $(5{\sim}35^{\circ}C)$, mussel size $(5.6{\sim}13.3cm)$ and food con centrations $(49{\sim}491{\mu}g\;Chl-{\alpha}L^{-1})$. Among the applied temperature, the maximum FR $(0.41L\;gAFDW^{-1}hr^{-1})$ and PFP (0.47mg $gAFDW^{-1}hr^{-1}$) were observed at 15 and $25^{\circ}C$, respectively. Both weight-based FR and PFP were not correlated with the mussel size, and the values lied in a limited range with some degree of variation. Likewise, no significant relations between FR and PFP was observed in the mussel size. The FR values were negatively correlated with food concentration, while PFP showed positive correlation. Among the applied food concentrations, the maximum FR (0.34L $gAFDW^{-1}hr^{-1}$) and PFP (0.06mg $gAFDW^{-1}hr^{-1}$) appeared in $113{\mu}g\;Chl-{\alpha}L^{-1}$ and $491{\mu}g\;Chl-{\alpha}L^{-1}$, respectively. These results indicate that the grazing of Unio douglasiae are affected by various parameters, and it may be applied as an effective biofilter to inhibit Microcystis bloom under appropriate application. However, further studies on the fate of excreted pseudofeces are needed to understand their possibility of stimulating nuisant algal growth.

Variation of Activation of Inactivated Granular Microorganisms in the UASB Process (UASB 공정에서 불활성화된 입상미생물의 활성변화)

  • LEE Heon-Mo;YANG Byung-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.27 no.1
    • /
    • pp.89-96
    • /
    • 1994
  • The recovery posibility of granular sludge inactivated due to high organic loading at stawrt-up stage of UASB reactors was examined at various storage periods while kept at a constant temperature of $35^{\circ}C$. It was noticed that the inactivated sludge kept without feeding recovered microbial activity much faster than that kept with continuous feeding. The activity of the sludge gradually recovered to the point where the organic removal rate of 0.15g of 0.15g COD/g VSS-day at the inactivated stage had changed to 0.36g COD/g VSS-day after 60 days of storage without feeding, which was similar to the active granular sludge activity of 0.38g COD/g VSS-day. There was no significant different in the characteristics of activity recovery between granular sludge and smashed sludge.

  • PDF

An Analysis on the Container Terminal Operation by Considering the Key Factors for Fluctuating Container Traffic Volume (물동량 변동요인이 터미널 운영에 미치는 영향력 분석에 관한 연구)

  • Jung, Hyun-Jae;Yeo, Gi-Tae
    • Journal of Korea Port Economic Association
    • /
    • v.27 no.1
    • /
    • pp.95-109
    • /
    • 2011
  • The aim of this study is to analyze the container terminal operation by considering the key factors that fluctuates the container traffic volume using the System Dynamics (SD) method. The target area of this study is the 'A' container terminal which is located in the Port of Incheon and the simulation period is from 2004 to 2020. As evaluation indexes for container terminal operation, three factors such as 'total sales', 'operating ratio of C/Y' and 'operating ratio of G/C' are selected, and as for the key factors of fluctuating container traffic volume, 'variation ratio of world trade', 'variation ratio of trade among three countries in North-East Asia' and 'variation ratio of won-dollar rate are used. As of 2020, the result of this study is that import-export container traffic volume increases almost 880,000TEU and total sales and operating ratio of G/C each reach 7.1 bilion won and 65 percent. No changes however in loadage and operating ratio of C/Y in 'A' container terminal are indicated. The reason is that capability of C/Y is exceeded. Therefore this study suggest that decision-makers of 'A' container terminal realize the importance of additional space of C/Y.