• 음성과학
• /
• 제14권2호
• /
• pp.23-33
• /
• 2007

This study examined the aerodynamic functions (mean airflow rate MFR, subglottal pressure Psub) and closed quotients (CQs) in the fixed pitch (C3, E3, G3, C4) with the variable loudness (70 and 80 dB) as well as in the fixed loudness at 70 dB and 80 dB with the variable pitch (C3, E3, G3, C4) in five classic male singers (Baritone). Results showed that MFR significantly increased at C3, E3, and G3 and Psub significantly increased at C4 when the loudness increased from 70 to 80 dB. At 70 dB, MFR and Psub significantly increased and CQ significantly decreased when the pitch increased from C3 to C4. At 80 dB, MFR significantly decreased when the pitch increased from C3 to G3. However, Psub showed the significant decrease with the pitch increased at 80 dB. In conclusion, as the loudness increases, the aerodynamic loss is getting higher and vocal efficiency becomes lower at low pitch than at higher pitch. At a low loudness level, the main mechanism to control loudness is the amount of medial compression of the vocal folds rather than the aerodynamic function. In addition, the aerodynamic function and medial compression of the vocal folds have a significant role in increasing the loudness level.

• Journal of Pharmaceutical Investigation
• /
• 제33권2호
• /
• pp.79-84
• /
• 2003

The effects of various pressure sensitive adhesives (PSA) and enhancers on the percutaneous absorption of tulobuterol were investigated. The permeation rate of tulobuterol through hairless mouse skin from various adhesives was evaluated using a flow-through diffusion cell system at $37^{\circ}C$. The permeability of tulobuterol was variable depending on the physicochemical property of the PSA. The permeation rate of tulobuterol from polyethylene oxide grafted acrylic adhesive matrix was higher than that from other PSA matrices. The flux of tulobuterol was $4.37{\pm}0.34\;{\mu}g/hr/cm^2$ from polyethylene oxide grafted acrylic adhesive matrix. When the effects of various enhancers on the percutaneous absorption of tulobuterol from grafted acrylic adhesive were evaluated, Plurol $oleique^{\circledR}$ showed higher flux than all other enhancers tested.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.3-11
• /
• 2004

A finite volume model is developed to simulate the surface irrigation at a paddy field. The model's capabilities are validated through comparison with the simulafed results and the observed data obtained by various experimental tests, and the simulated results are in good agreement with the observed pending depth. The result of surface irrigation simulation shows that the longer the paddy field's the length of long-sided becomes, the longer the advance and storage time is taken. To analyze surface irrigation performance with variable inflow rate, three patterns of flow variation-constant rate, initially high then low, and initially low then high-were studied. The results show that at the pattern with initially high followed by low during the latter half of the irrigation the advance time is shortest, but the pending depth of irrigation completion and irrigation effiency are the little difference between irrigation patterns.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.138-139
• /
• 2007

This research provides machine designers with some intuition to consider both, magnetic and heat transfer effects. A topological multi-objective function includes magnetic energy and heat inflow rate to the system, which equals to the total heat dissipation by conduction and convection. For the thermal field regarding the heat inflow, introduced as a reaction force, topology design sensitivity is derived by employing discrete equations. The adjoint variable method is used to avoid numerous sensitivity evaluations. As a numerical example, a C-core design excited by winding current demonstrates the strength of the multi-physical approach.

• 디지털융복합연구
• /
• 제11권2호
• /
• pp.175-182
• /
• 2013

본 연구에서는 주택 수요와 공급의 상호영향관계 메커니즘을 이용하여 가격 시뮬레이션 모형을 개발하였다. 가격 시뮬레이션 모형의 핵심 알고리즘은 피드백 제어 이론을 이용한 시스템 다이나믹스 기반의 스톡 플로우 변수이며, 이러한 원리를 이용하여 서울지역 아파트 가격변화 행태를 모델링하였다. 가격 행태를 결정하는 피드백 메커니즘은 중장기 경기변동 시나리오 하에 대출 이자율을 정책변수로 아파트 매매 수요자와 공급자 규모를 스톡 변수로 설정하고, 이들 간의 상호 영향관계를 검증하였다. 본 논문을 통하여 향후 아파트 가격 추이는 아파트 매매 수요자와 공급자 규모의 행태 변화와 수요자와 공급자가 갖는 가격에 대한 반응 매개변수간의 영향관계로 구성된다. 또한 향후 경기 전망 및 대출이자율 등 거시경제의 상황에 따라 아파트 매매가격은 변화함을 알 수 있었다. 제시된 아파트 매매 가격 시뮬레이션 계량모델은 양도세 및 취득세 감면 등 비 금융 관련 부동산정책변수와 대출이자 조정 등 금융 관련 정책변수의 보다 정확하고 충분한 데이터를 적용하면 실무 적용과 정부 주택정책입안에 활용 할 수 있을 것으로 판단된다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2171-2180
• /
• 1991

본 연구에서는 구심터어빈의 설계시 많이 사용되고 있는 NASA의 안내깃 및 회 전익 손실모델들을 이용하여 PR과 K를 실험에 의존하지 않고 구하는 방법을 제시하고 자 한다. 그리고 이 방법을 가변 안내깃이 존재하거나 없는 가상의 구심터빈에 대하 여 탈설계 성능해석을 하여, 본 방법이 기존에 알려진 실험 현상과 유사한 경향을 보 이는지를 알아보기로 한다. 또한 안내깃이 있는 경우에 대하여 기존의 알려진 탈설 계 성능 예측용 프로그램과의 비교를 통하여 본 연구의 해석방법을 간접적으로 검증하 기로 한다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1674-1685
• /
• 2022

The ball valve is an important device in the pipeline transportation system of nuclear power plants. Its operational stability and safety directly affect the normal working of nuclear power plants. In this study, the transient numerical simulation of the opening and closing process of a ball valve was conducted on the basis of the flow interruption capability experiment of the ball valve by using the moving mesh method and inlet and outlet variable boundary conditions. The flow rate and pressure difference with time of the opening and closing process of the ball valve were studied. The internal flow characteristics of the ball valve under different relative openings were analyzed in conjunction with the typical back-step flow structure. Results show that the transient numerical results agree well with the experimental results. The internal flow characteristics of the ball valve are similar at the same opening during opening and closing process. At small opening, the spool and outlet channels easily form a back-step flow structure. The disappearance and generation of backflow vortices during opening and closing occur at 85% opening and 75% opening, respectively. With the decrease in opening degree, the difference in vortex core area in the flow channel of the ball valve spool in the opening and closing process gradually appears. The research results provide some reference value for the design and optimization of ball valves.

• 한국유체기계학회 논문집
• /
• 제18권1호
• /
• pp.29-36
• /
• 2015

Recently, Stirling engines are emerging as a key device for power conversion of renewable energy or waste energy. This study develops a LTDSE(Low Temperature Differential Stirling Engine) using a water spray for higher heat transfer and performs load performance tests for various flow rates and temperatures of hot water spray for variable engine loads emulated by a mechanical friction device. Internal temperature and pressure, working frequency and inlet and outlet temperature of the supply water are measured. As a result, the increases in flow rate and temperature of hot water respectively enhance the power output, efficiency and the working frequency, while the increasing engine load leads to decreases in working frequency but increases in the pressure amplitude. Eventually, it is revealed there exists a maximum shaft power of the test engine.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.352-359
• /
• 2010

In recent years, the market has shown increasing interest in pump-turbines. The prompt availability of pumped storage plants and the benefits to the power system achieved by peak lopping, providing reserve capacity, and rapid response in frequency control are providing a growing advantage. In this context, there is a need to develop pumpturbines that can reliably withstand dynamic operation modes, fast changes of discharge rate by adjusting the variable diffuser vanes, as well as fast changes from pumping to turbine operation. In the first part of the present study, various flow patterns linked to operation of a pump-turbine system are discussed. In this context, pump and turbine modes are presented separately and different load cases are shown in each operating mode. In order to create modern, competitive pump-turbine designs, this study further explains what design challenges should be considered in defining the geometry of a pump-turbine impeller. The second part of the paper describes an innovative, staggered approach to impeller development, applied to a low head pump-turbine project. The first level of the process consists of optimization strategies based on evolutionary algorithms together with 3D in-viscid flow analysis. In the next stage, the hydraulic behavior of both pump mode and turbine mode is evaluated by solving the full 3D Navier-Stokes equations in combination with a robust turbulence model. Finally, the progress in hydraulic design is demonstrated by model test results that show a significant improvement in hydraulic performance compared to an existing reference design.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.266-272
• /
• 2000

The importance of variable displacement piston pump is recently increasing in industrial applications, as it is widely used for raising the energy level of the fluid in hydraulic system. The regulator is the device that controls the pump output flow depending on the machine load and engine speed, and that regulates the discharge flow of the piston pump by controlling the swivel angel. This work deals with constant power control of a regulator system in bent-axis type piston pump. In order to use engine power effectively, it is important to keep the horsepower from the engine to the pump constant. Therefore, optimum power usage is obtained by accurately following the power hyperbola. First, the governing equations of the regulator are derived, and analysis is performed by numerical simulation in which significant parameters of regulator are identified. Also, we designed and manufactured the prototype of the constant power control regulator for experiments. The experimental results show the responsibility and pressure-flowrate characteristics and these are compared with the theoretical analysis. As the result, it is confirmed that the characteristics of the designed regulator correspond to the numerical simulation.