• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.178-183
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloys for variable load within tensile load range condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratio is R=0.3 and variable load are R=0.65, 0.46. Crack length, stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc. are inspected with fracture mechanics estimate.

• 무역상무연구
• /
• 제49권
• /
• pp.139-164
• /
• 2011

Traditionally courts have been adopted over the years two standards of dealing with compliance of documents such as strict compliance and substantial compliance and the substantial compliance, which was somewhat less demanding than the strict compliance. However the new guidelines of ICC's international standard banking practice for the examination of documents under documentary credits set up how the UCP is to be applied in practice. The payment obligations of an issuing bank to a beneficiary are independence of the performance or the nonperformance of any contract underlying the letter of credit. However, strictly applying the principle of independence and abstraction could produce unfair results by operating unjustly enrich an unscrupulous beneficiary in case of fraud. Accordingly, when a beneficiary presents complying documents, the issuing bank is bound to honour the presentation unless the fraud rule applies on the facts of the case such as forged or material fraud. If it does, the issuing bank(issuer) needs not pay despite the complying presentation of documents by the beneficiary under the Uniform Commercial Code Article 5-109 and case law in America. However the fraud rule was not addressed in UCP 600. In conclusion, view in terms of legal principle and the court cases is variable and difficult to honour or dishonour the presentation in case of application of the independence principle and fraud rule such as the problems on burden of proof timely, possibility of granting injunction in order to protect against victim for bona fide applicant.

• Journal of Information Technology Applications and Management
• /
• 제22권2호
• /
• pp.171-199
• /
• 2015

This study proposes the practical information security measures that help IT personnel of banks comply the information security policy. The research model of the study is composed of independent variables (clarity and comprehensiveness of policy, penalty, dedicated security organization, audit, training and education program, and top management support), a dependent variable (information security policy compliance intention), and moderating variables (age and gender). Analyses results show that the information security measures except 'clarity of policy' and 'training and education program' are proven to affect the 'information security policy compliance intention.' In case of moderating variables, age moderated the relationship between top management support and compliance intention, but gender does not show any moderating effect at all. This study analyzes information security measures based solely on the perception of the respondents. Future study may introduce more objective measurement methods such as systematically analyzing the contents of the information security measures instead of asking the respondents' perception. In addition, this study analyzes intention of employees rather than the actual behavior. Future research may analyze the relationship between intention and actual behavior and the factors affecting the relationship.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2001년도 학술발표회 논문집(I)
• /
• pp.465-470
• /
• 2001

No Abstract (See Full-text)

• Journal of Preventive Medicine and Public Health
• /
• 제54권4호
• /
• pp.230-237
• /
• 2021

Objectives: This study explored changes in individuals' behavior in response to social distancing (SD) levels and the "no gatherings of more than 5 people" (NGM5) rule in Korea during the coronavirus disease 2019 (COVID-19) pandemic. Methods: Using survey data from the COVID-19 Behavior Tracker, exploratory factor analysis extracted 3 preventive factors: maintenance of personal hygiene, avoiding going out, and avoiding meeting people. Each factor was used as a dependent variable. The chisquare test was used to compare differences in distributions between categorical variables, while binary logistic regression was performed to identify factors associated with high compliance with measures to prevent transmission. Results: In men, all 3 factors were significantly associated with lower compliance. Younger age groups were associated with lower compliance with maintenance of personal hygiene and avoiding meeting people. Employment status was significantly associated with avoiding going out and avoiding meeting people. Residence in the capital area was significantly associated with higher compliance with personal hygiene and avoiding venturing out. Increasing SD levels were associated with personal hygiene, avoiding going out, and avoiding meeting people. The NGM5 policy was not significantly associated with compliance. Conclusions: SD levels, gender, age, employment status, and region had explanatory power for compliance with non-pharmaceutical interventions (NPIs). Strengthening social campaigns to inspire voluntary compliance with NPIs, especially focused on men, younger people, full-time workers, and residents of the capital area is recommended. Simultaneously, efforts need to be made to segment SD measures into substrategies with detailed guidance at each level.

• 한국ITS학회 논문지
• /
• 제16권2호
• /
• pp.116-127
• /
• 2017

도로 상의 안개는 교통류에 영향을 미치는 요인으로 알려져 있다. 이를 해소하기 위한 방안으로 최근 실시간 도로 및 기상조건에 따라 적절한 제한속도를 제공하는 가변제한속도시스템 VSL(Variable Speed Limit)을 도입하여 운영하고 있다. 하지만, VSL은 운전자가 제한속도를 준수하지 않을 경우 차량 간 속도 편차가 증가하여 오히려 교통사고의 위험도를 가중시킬 수 있다. 따라서, 본 연구는 기상조건별 VSL 유 무에 따른 운전자의 가변속도제한의 순응 경향 및 교통특성 분석을 목적으로 한다. 차량 시뮬레이터를 이용한 주행 환경을 구현하여 실험을 수행하였으며 기상조건은 크게 맑음, 안개로 나누었다. 분석 결과, 피험자의 평균 속도는 대부분 제한속도를 순응하였지만 전체적으로 속도 편차는 가변제한속도를 적용할 경우에 감소하는 것으로 분석되었고 특히, 안개가 발생할 경우 더욱 뚜렷하게 감소하는 것으로 나타났다. 기상조건이 운전자의 전방 시거에 영향을 미치면 VSL에 대한 운전자의 순응도는 높아지고, 속도 편차가 감소하여 교통안전성 향상에 도움을 주는 것으로 나타났다. 이는 향후 가변속도제한 운영속도를 산정하는데 기초자료로 사용할 수 있을 것으로 기대된다.

• 산업기술연구
• /
• 제19권
• /
• pp.43-50
• /
• 1999

Vehicle suspensions can be regarded as interconnection of rigid bodies with kinematic joints and compliance elements such as springs, bushings, and stabilizers. Design of a suspension system requires detailed specification of the interconnection point (or so called hard points) and characteristic values of compliance elements. During the design process, these design variables are determined to meet some prescribed performance targets expressed in terms of SDFs (Static Design Factors), such as toe, camber, compliance steer, etc. This paper elaborates on a systematic approach to achieve optimum design of suspension systems.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.168-177
• /
• 2007

In a number of fields, robots are being used for two purposes: efficiency and safety. Most robots, however, have single-actuator mechanism for each joint, where the tasks are performed with high stiffness. High stiffness causes undesired problems to the environment and robots. This study proposes redundant actuator mechanism as an alternative idea to cope with these problems. In this paper, Double-Actuator Unit (DAU) is implemented at each joint for applications of multi-link manipulators. The DAU is composed of two motors: the positioning actuator and the stiffness modulator, which enables independent control of positioning and compliance. A three-link manipulator with DAUs enables adaptive control of RCC. By modulating the joint stiffness of the manipulator and controlling the position of RCC, we can significantly reduce contact force during assembly tasks and surgical procedures.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.98-103
• /
• 2004

This paper presents modeling and simulation of the bump foil bearings with consideration of the elastic behavior of the foil and gas compressibility. Heshmat had originally introduced the simple compliance model to estimate the EHL(elasto-hydrodynamic lubrication) performance. But this approach can not consider the deflection of top foil at the edge of bearing, so model is insufficient to analyze in case that the eccentricity ratio is greater than I. So the top foil is considered as a simple beam model supported by linear spring elements, and the bump foil deflection can be simple compliance model. The EHL calculations are performed for convention rigid type, classical foil type, variable pitch type and double bump type toil bearings. This paper presents that 2nd or 3rd generation bearings have excellent performance in every speeds.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.143-150
• /
• 1994

Wall shear rate or stress is believed to be a major hemodynamic variable influencing atherosclerosis and artery-graft anastomic intimal hyperplasia. The purpose of this study is to verify the effects of radial wall motion, artery-graft compliance and diameter mismatch, and impedance phase angle on the wall shear rate distribution near an end-to-end artery-graft anastomosis model. The results show that radial wall motion of the elastic artery model lowers the mean wall shear rates under pulsatile flow condition by 15 to 20 % comparing to those under steady flow condition at the same mean flow rate. Impedance phase angle seems to have small effects on the mean and amplitude of the wall shear rate distribution. In order to study the effects of compliance and diameter mismatch on the wall shear rates, two models are studied-Model I has 6% and Model I has 6% and Model II has 11% smaller graft diameter. Divergent geometry caused by diameter mismatch near the distal sites reduces the mean wall shear rates significantly, and this low shear region is believed to be prone to intimal hyperplasia.