• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.526-531
• /
• 1998

A hydride vapor phase epitaxy (HVPE) method was performed to grow the $10~240\mu{m}$ thick GaN films on (111) spinel $MgAl_2O_4$ substrate. The GaN films on $MgAl_2O_4$ substrate revealed a photoluminescence (PL) characteristics of the impurity doped GaN by the out-diffusion and auto-doping of Mg from $MgAl_2O_4$ substrate during GaN growth. The PL spectrum measured at 10K consists of free and bound excitons related recombination transitions and impurity-related donor-acceptor pair recombination and its phonon replicas. However, the deep-level related yellow band emission was not observed. The peak energy of neutral donor bound excitonic emission and the frequency of Raman $E_2$ mode were exponentially decreased with increasing the GaN thicknesses. and the frequency of E, Raman mode was shifted with the relation of $\Delta$$\omega$=3.93$\sigma$($cm^{-1}$/GPa), where l1 (GPa) is the residual strain in the GaN epilayers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.99-99
• /
• 2008

To grow the large diameter GaN with high structure and optical quality has been obtained by hydride vapor phase epitaxy(HVPE) method. In addition to the nitridation of $Al_2O_3$ substrate, we also developed a "step-growth process" to reduce or to eliminate the bowing of the GaN substrate caused by thermal mismatch during cool down after growth. The as-grown 380um thickness and 75mm diameter GaN layer was separated from the sapphire substrate by laser-induced lift-off process at $600^{\circ}C$. A problem with the free-standing wafer is the typically large bowing of such a wafer, due to the built in the defect concentration near GaN-sapphire interface. A polished G-surface of the GaN substrate were characterized by room temperature Double crystal X-ray diffraction (DCXRD), photoluminescence(PL) measurement, giving rise to the full-width at half maximum(FWHM) of the rocking curve of about 107 arcsec and dislocation density of $6.2\times10^6/cm^2$.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.201-206
• /
• 2005

In this work, we tried to improve the fabrication process in HVPE (Hydride Vapor Phase Epitaxy) system by using Si(111) substrate with pre-deposited Al layer. PL measurements was done for samples with and without pre-deposited Al on Si and it was also examined the dependence of the optical characteristic properties on AlN buffer thickness for GaN/AIN/Al/Si. A sample with thin Al nucleation layer on Si substrate reveals a better optical property than the other. And it suggests that the thickness for AlN buffer layer with thin Al nucleation layer on Si(111) substrate is most proper about $260{\AA}$ to grow GaN in HVPE system. The surface morphology of GaN clearly shows the hexagonal crystallization. The XRD pattern showed strong peak at GaN{0001} direction.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.25-29
• /
• 2021

This paper demonstrates the utility of the Ni-Pd and carbon-nanotube (Ni-Pd-CNT)-based nanoalloy to improve the α-Ga₂O₃ crystal quality using the halide-vapor-phase epitaxy (HVPE) method. As result, the overall thickness of the α-Ga₂O₃ epitaxial layer increased from a Ni electroless plating time of 40 s to 11 ㎛ after growth. In addition, the surface morphologies of the α-Ga₂O₃ epilayers remained flat and crack-free. The full-width half-maximum results of the X-ray diffraction analysis revealed that the ($10{\bar{1}}4$) diffraction patterns decreased with increasing nominal thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.37-39
• /
• 1996

A hydride vapor phase epitaxy (HVPE) method was performed to prepare the GaN thick-films on c-plane sapphire substrates. The full-width at half maximum of double crystal X-ray rocking curve from 350${\mu}{\textrm}{m}$ thick GaN was 576 arcsecond. The photo- luminescence spectrum measured (at room temperature) show the narrow bound exciton(I$_2$) line and weak donor-acceptor pair recombination peak, however, there was not observed deep donor-acceptor pare recombination indicate the GaN crystals prepared in this study are of high purity and high crystalline quality.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.398-402
• /
• 2010

The liquid phase epitaxy(LPE) method was widely used to growth of mercury cadmium telluride(MCT) thin films. However, this method lead to Hg-vacancies in MCT thin film, because Hg has high vapor pressure at this temperature range. This is a well known defect in HgCdTe grown by LPE method. In this study, we report the development of techniques for improving the crystalline quality and controlling the composite uniformity of HgCdTe thin films using high- pressure Hg-ambient annealing method. As a result, we achieved the improvement of the composite uniformity of HgCdTe thin films. It was observed by the high angle annular dark field scanning TEM(HAADF-STEM) analysis. Moreover, new HgTe phase and a shrinking of lattice fringe were observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.387-387
• /
• 1998

This paper reports on a thermodynamic analysis for the GaN thick film growth by vapor phaseepitaxy method. The thermodynamic calculation was performed using a chemical stoichiometric algorism. Thesimulation variables include the growth temperature in a range 400~1500 K, the gas ratios $(GaCl_3)/(GaCl_3+NH_3)$and $(N_2)/(GaCl_3+NH_3)$. The theoretical calculation predicts that the growth temperature of GaN be in thelower range of 450~750 K than the experimental results. The difference in the growth temperature betweenthe simulation and the experiments indicates that the vapor phase epitaxy of GaN is kinetically limited,presumably, due to the high activation energy of thin film growth.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.457-461
• /
• 1996

HVPE(hydride vapor phase epitaxy)법을 이용하여 C(0001)면의 사파이어 기판위에 GaN 박막을 성장하였다. 110$0^{\circ}C$의 온도에서 박막의 성장률은 120$\mu\textrm{m}$/hr이었고, 사파이어 기판과 GaN사이의 격자상수와 열팽창계수차로 인하여 많은 크랙이 존재하였다. 두께가 20$\mu\textrm{m}$인 GaN의 (0002)면에 대한 X-선 회절피크의 반치폭은 576초 이었다. 10K의 온도에서 측정된 광루미네센스 스펙트럼에서는 강한 강도의 속박여기자에 의한 피크(I2)와 약한 강도의 도너-억셉터 쌍 사이의 재결합에 의한 피크가 나타났으며, 깊은 준위로부터의 발광은 검출되지 않았다. GaN 박막의 전기전도형은 n형 이었고, 전자이동도와 캐리어농도는 각각 72$\textrm{cm}^2$/V-sec와 6x1018cm-3이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.194-197
• /
• 1997

A hydride vapor phase epitaxy (HVPE) method was performed to prepare the thick-fi lm GaN on AIN/Si substrates. We obtained substrate-free GaN. The foul t-width at half maximum of double crystal X-ray rocking curve from 350 ${\mu}{\textrm}{m}$ thick substrate-free GaN was ~1000 arcsec. The photoluminescence spectrum (at 20 K) shows the narrow bound exiton (I$_2$) line and wealth donor-acceptor pair recombination however. there was not observed deep donor-accepter pair recombination indicate the substrate-free GaN crystal prepared in this study are of high purity and high crystalline quality.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc1
• /
• pp.93-95
• /
• 2012

We report on the growth and characterization of the nano- and micro scale GaN structures selectively grown on the vertex of GaN stripes using the metal organic vapor phase epitaxy method and conventional photolithography technique. The triangular shaped nano- and micro GaN structures which have semi-polar {11-22} facets were formed only on the vertex of the lower GaN stripes. Crystalline defects reduction was observed by transmission electron microscopy for upper GaN stripes. We also have grown the InGaN/GaN multi-quantum well structures on the semi-polar facets of the upper GaN stripes. Cathodoluminescence images were taken at 366, 412 and 555 nm related to GaN band edge, InGaN/GaN layer and defects, respectively.