• 한국수산과학회지
• /
• 제32권5호
• /
• pp.582-586
• /
• 1999

생분해성으로서 가식성인 alginate 필름을 가공하기 위한 기초자료로써 $3\%$ $Na_2CO_3$ 추출시간 5시간으로 추출한 alginate로 만든 alginate 필름의 수증기 투과율과 장력성에 영향을 미치는 alginate농도와 가소제의 종류별 첨가량에 관한 조건을 측정한 결과는 다음과 같다. Alginate의 농도가 증가할수록 인장강도는 증가하였으나 수증기 투과율과 신장도는 감소하였다. 반면에 가소제의 첨가량이 증가할수록 수증기 투과율과 신장도는 증가하였으나 인장강도는 감소하였다. 가소제의 종류별에 따른 수증기 투과율은 glycerol, polyethylene glycol 및 sorbitol 첨가 필름 순으로 높게 나타났으며, 인장강도는 polyethylene glycol, sorbitol, glycerol 첨가 필름 순서이었으나 신장도는 그 반대되는 결과였다. 가소제의 종류와 필름의 색은 sorbitol 첨가 필름의 색이 가장 자았고, 황색도는 glycerol 첨가 필름이 가장 높았고, 적색도는 polyethylene glycol 첨가 필름이 가장 높았다. 그리고 전체적인 색의 차이에서는 polyethylene glycol 첨가 필름이 가장 높았다.

• 산업식품공학
• /
• 제15권4호
• /
• pp.305-310
• /
• 2011

본 연구에서는 DSM을 이용하여 단백질 추출이나 정제없이 식품에 적용 가능성이 있는 가식성 필름을 개발하였다. HPH 처리는 표면이 매끄럽고 균일한 형태의 필름을 형성시켰고, 필름의 WVP값을 감소시켜 수분 방벽 효과를 높였다. 필름 내 글리세롤 농도 증가는 WVP값을 전반적으로 높였다. 농산물 가공 부산물인 DSM으로 제작된 가식성 필름은 새로운 식품 소재로서 상업적 적용 가능성을 보여주었다.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• 한국식품과학회지
• /
• 제26권2호
• /
• pp.138-140
• /
• 1994

Zein과 gluten을 이용하여 시험제조한 분해성 포장지의 기능성을 조사하였다. Zein과 gluten 포장지의 인장강도는 각각 $30.1{\sim}138.5\;MPa$, $37.1{\sim}98.6\;MPa$ 범위를 나타냈으며 제조된 포장지의 두께가 두꺼워질수록 인장강도는 증가하였다. 용해도는 zein 포장지가 1.3%로서 gluten 포장지 및 셀룰로오스 포장지의 용해도에 비하여 상대적으로 낮게 나타났다. 한편, 수증기투과도는 zein 포장지의 경우 $0.0711{\sim}0.01778\;g\;mm/m^2\;hr\;mmHg$, gluten 포장지의 경우 $0.2134{\sim}0.2972\;g\;mm/m^{2}\;hr\;mmHg$였으며 인장강도와 마찬가지로 제조된 포장지의 두께가 두꺼워질수록 증가하였다.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.81-91
• /
• 1988

The purpose of this study is to investigate the physiolosical responses and subjective wear sensation to the clothes with different cellulose composition. The experimental garments were four types of cellulosic fabrics, respectively composed of $100\%$-cotton, $100\%$-Rayon, cotton/Flax 85/15, and rayon/Flax 85/15 (weft blended), were sewn in blouses with half-length sleeves. Four healthy women were chosen for this experiment. The condition of the experimental room were in two environments: Temp., $25{\pm}1^{\circ}C$, R.H. $60{\pm}3\%$ and Temp., $30{\pm}1^{\circ}C$, R.H. $70{\pm}3\%$, and air velocity was maintained at 0.25 m/sec. The results are as follows. 1) At $25^{\circ}C$, rayon blouse showed the pleasantest feeling because of its excellent humidity sensation and tactile sensation. At $30^{\circ}C$, rayon and flax blended blouse showed most comportable sensation. In both environments, blouse of $100\%$ cotton showed the least pleasant because of high vapor pressure inside the blouse and bad tactile sensation. 2) Vapor pressure inside the blouse and tactile sensation play the most impotant role in comfort. Consequantly the blouse made of $100\%$-cotton which bring low air permeability, moisture regain and water vapor permearbility showed more unpleastness than rayon blouse because it raises temperature, relative humidity and vapor pressure inside the blouse under the hot circumstances In the conditions with much sweat, rayon and flax blended blouse with high stiffness increases comfort better than $100\%$ rayon because the former prevents sticking to the skin.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.27-33
• /
• 2016

군수품은 방한복을 중심으로 투습방수성 소재 적용이 확대되고 있다. 특히 혹한기에는 장병의 생존성 확보를 위해 피복의 투습방수 기능이 더욱 중요한데, 체온의 손실을 예방하기 위해 땀은 외부로 빨리 발산하고 외부의 수분은 인체로 침투되지 않도록 해야 하기 때문이다. 한편, 한국군은 투습방수 소재의 성능을 내수도와 투습도로 평가하고 있다. 투습도는 규정된 온도 및 습도 하에서 직물을 통과하는 수증기의 증발 양을 측정하는 것으로, 이 중 아세트산포타슘을 이용한 방법(KS K 0594)이 주로 적용되고 있다. 그러나 이 방법은 시약의 준비 절차가 간략히 제시되어 공인시험기관별로 시험에 대한 준비과정 등이 상이하게 적용되고 있으며 이로 인해 결과의 편차가 크게 발생되고 있다. 따라서 본 연구에서는 공인시험기관별로 아세트산포타슘을 이용한 투습도 시험의 절차를 비교하고, 결과에 영향을 미치는 인자를 분석하여 투습도의 차이를 없애기 위한 개선안을 도출한다. 개선안에 대해 공인시험기관별 투습도에 대한 결과의 차이를 분석하기 위해 유의수준(0.05)을 바탕으로 일원배치법으로 분석한 결과 투습도의 편차가 감소한 것을 확인하였다.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.122-129
• /
• 2012

To develop a waterproof breathable material, we fabricated three kinds of nanofiber web laminates using a massproduced electrospun nanofiber web with different substrates and layer structures. The waterproofness and breathability of nanofiber web laminates were evaluated after repeated launderings and compared with those of conventional waterproof breathable fabrics currently in use, including densely woven fabric, microporous membrane laminated fabric, and coated fabric. The durability of nanofiber web laminates, including adhesion strength, abrasion resistance, tensile strength, and tearing strength, was also assessed and compared with those of conventional waterproof breathable fabrics. The water vapor transmission of nanofiber web laminates increased slightly after repeated launderings, whereas the air permeability somewhat decreased after launderings but still maintained an acceptable level of air permeability. Laundering reduced the resistance to water penetration of nanofiber web laminates, which implies that laminating techniques or substrate materials that could support waterproofness of the laminated structure should be explored. The adhesion strength, abrasion resistance, tensile strength, and tearing strength of nanofiber web laminates were in a range comparable to conventional waterproof breathable materials.

• 한국건축시공학회지
• /
• 제2권1호
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.71-90
• /
• 1999

This study was conducted to examine the comfortability of wearing pantyhose in summer. To satisfy this purpose. 4 types of pantyhose were chosen from the market: a Mono type(M), a Wooly type(W), and two Support types(Sl, S2), were chosen. After the performances of samples were measured, these were worn by 8 healthy adult women. Under the summer field environment, psychological comfort ability was examined through the 5 steps of SD method. Physiological comfort ability was examined by measuring the body reactions(clothing pressure, skin temperature, total body weight loss, rectal temperature, pulse rates, and blood pressure), under the artificial environment($28.5{\pm}0.5^{\circ}C$, $82{\pm}3%$). The results of this examination were as follows : The order of comfortability which people felt in the field was W>M>S1>S2. The number of items which showed the highest correlation with comfort ability decreased and the correlation was lowered on the whole as time went by. There was positive high correlation between the performances of samples and comfort ability in compressibility, air permeability, water vapor permeability, while a negative high correlation in thickness, weight, compressional resiliency, strain (course) and moisture regain. The mean skin temperature was in the comfort zone, and rectal temperature, pulse rates, blood pressure were mostly in the normal range. Also it was showed that the correlation between the performance of samples and body reactions, except total body weight loss, was low.

• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.153-159
• /
• 2014

This study evaluates the changes of the subjective hand, preference, comfort and mechanical properties of tricot based artificial suede made from sea-island type micro fibers according to raising condition. The subjective hand and the preference of raised suede for jacket were rated by the 20's and 30's women experts according to raising cycles. Comfort properties were evaluated by air permeability, water vapor transmission, and thermal transmission. Mechanical properties were measured by the KES-FB system. The subjective hand of artificial suede was categorized into three hand factors: smoothness, warmness and thickness. Smoothness, warmness and thickness perception increased with raising cycles which affected hand preference and luxuriousness perception. The thickness and wale density of suede increased with the number of raising. Suede became more compact and less pliable and less stretchable due to increased fabric thickness; in addition, the surface of suede became smoother and compressive since the surface evenness of suede improved with smaller fiber fineness and an increased amount of naps covered the base fabric. Furthermore, water vapor transmission decreased and thermal insulation increased. The best raising conditions for artificial suede was four cycles in which artificial suede was preferred without changes in physical properties.