• 제목/요약/키워드: Vapor absorption

검색결과 324건 처리시간 0.025초

THE EXTRACTION OF THE THERMAL RADIATION ASSOCIATED WITH GREENHOUSE GASES FROM AIRS MEASUREMENTS

  • Kwon, Eun-Han;Kim, Yong-Seung;Lee, Sun-Gu
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
    • /
    • pp.301-304
    • /
    • 2006
  • For the purpose of investigating the contributions of various gases to climate change, the thermal radiation associated with greenhouse gases are extracted from AIRS (Atmospheric Infrared Sounder) infrared radiances over the tropical pacific region. AIRS instrument which was launched on the EOS-Aqua satellite in May 2002 covers the spectral range from 650 cm-1 to 2700 cm-1 with a spectral resolution of between 0.4 cm-1 and 1 cm-1. In order to extract the thermal radiation absorbed by individual gases, the interfering background radiances at the top of the atmosphere are simulated using the radiative transfer code MODTRAN (MODerate spectral resolution atmospheric TRANsmittance). The simulations incorporated the temperature and water vapor profiles taken from NCEP (National Centers for Environmental Prediction) reanalyses. The differences between the simulated background radiance and AIRS-measured radiance result in the absorption of upward longwave radiation by atmospheric gases (i.e. greenhouse effect). The extracted absorption bands of individual gases will allow us to quantify the radiative forcing of individual greenhouse gases and thus those data will be useful for climate change studies and for the validation of radiative transfer codes used in general circulation models.

  • PDF

전자 패키징 소재의 수착 특성화를 통한 신뢰성 평가 (Reliability Evaluation Through Moisture Sorption Characterization of Electronic Packaging Materials)

  • 박희진
    • 대한기계학회논문집A
    • /
    • 제37권9호
    • /
    • pp.1151-1158
    • /
    • 2013
  • 습기 수착 물성은 전자 패키징 장치의 신뢰성에 있어서 층간의 수증기 압력에 의해 공정과정 동안 발생되는 박리 불량의 고장 분석 및 최적의 재료 개발에 있어서 필수적이다. 본 논문에서는 온습도 모델에 따른 전자 패키징 재료의 온도 의존적인 흡습 및 탈습 물성을 변수화 하였고 이에 대한 온도 및 습도의 영향에 대해 고찰하였다. 변수화된 확산성에서 얻어진 확산 활성화 에너지는 등가의 습기 수착 수준을 위한 가속 수명 비율을 결정하고 신뢰 수명 평가에 요구되는 등가의 소요 시험 시간에 미치는 습기 확산성의 영향을 예측할 수 있게 한다. 신뢰성 시험 표준에서 평가된 유연 전자 모듈의 가속 수명비율을 예시하였다.

Room Temperature Ferromagnetism on Co and Fe Doped Multi-wall Carbon Nano-tube

  • Chae, K.H.;Gautam, S.;Yu, B.Y.;Song, J.H.;Augustine, S.;Kang, J.K.;Asokan, K.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.171-171
    • /
    • 2011
  • Co and Fe doped multi-wall carbon nano-tubes (MWCNTs) synthesized by microwave plasma enhanced chemical vapor deposition (PECVD) technique are investigated with synchrotron radiations at Pohang Light Source (PAL) and European Synchrotron Radiation Facility (ESRF). Near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K, Co $L_{3,2}$ and Fe $L_{3,2}$-edges, and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$-edges have been carried at 7B1 XAS KIST and 2A MS beamline, respectively, to understand the electronic structure and responsible magnetic interactions at room temperature. X-ray absorption spectroscopy (XAS) at C K-edge shows significant p-bonding and Co and Fe L-edges proves the presence of $Co^{2+}$ and $Fe^{2+}$ in octahedral symmetry. Co and Fe doped MWCNTs show good XMCD spectra at 300K. The effect on the magnetism is also studied through swift heavy ion (SHI) radiations and magnetism is found enhanced and change in the electronic structure in Co-CNTs is investigated.

  • PDF

대기중의 이산화탄소가 공기-아연전지에 미치는 영향 (Effect of Carbon Dioxide in the Air on Zinc-air Cell)

  • 김남인;박기홍;최용국;이우태
    • 공업화학
    • /
    • 제10권2호
    • /
    • pp.177-182
    • /
    • 1999
  • 대기중의 이산화탄소가 공기-아연전지에 미치는 영향을 검토하기 위하여 수산화칼륨 수용성 전해액을 공기와 접촉시킨 다음 시간의 경과에 따라 전해액중의 탄산칼륨 농도를 분석하여 전지 용량과의 관계를 규명하고자 하였다. 전해액은 공기와 접촉하는 시간이 경과함에 따라 대기중의 이산화탄소 흡수로 인하여 탄산칼륨의 농도가 증가하였으나 이에 비례하여 전지의 용량은 선형적으로 감소하였다. 이산화탄소의 흡수반응속도는 소수성 막의 세공크기가 주 인자로 작용하였으며, 세공크기를 조절한 소수성 막을 사용한 결과 이산화탄소 흡수로 인한 전지용량 열화현상을 현저히 감소시킬 수 있었다.

  • PDF

태권도복 소재의 성능 및 착용감의 개선을 위한 연구 (A Study on the Improvement in Performances and Wearing Sensation of Textiles for Taekwondo Wears)

  • 전영민;박정희;최정화
    • 한국의류학회지
    • /
    • 제27권1호
    • /
    • pp.134-142
    • /
    • 2003
  • Performances of Taekwondo fabrics were evaluated in respect of fiber component. yarn count, weave structure and wearing comfort. As a beginning step, we investigated the present situation of Taekwondo wears by questionnaire from pro and amateur Taekwondo players. Samples employed in this study were cotton/nylon blend fabric that was newly woven for this study as well as fabrics of current Taekwondo wears for sale in the market. Their fundamental properties measured were such as air permeability, water vapor transport. wickability, absorption rate, Qmax values, thermal conductivity, durability, hand value, and etc. In addition, subjective wearing sensations were evaluated using Taekwondo wears made of those fabrics. From the results of the objective measurement and the subjective wearing test, we estimated the total fitness of fabrics as a Taekwondo wear. From the questionnaire we could see that pro players and amateurs wanted highly absorbing, quick drying, and soft-tough and complained abrasive surfaces and static elasticity of current fabrics. In view of the results so far achieved, nylon blended fabrics newly woven in this study, showed better comfort-related properties from both of the objective and subjective tests. It was also represented that finer yams enhanced water absorption and touch, and fabrics with rough surface such as honeycomb weave was superior in wearing comfort as well as aesthetic appearance.

열처리한 SiOCH 박막의 결합모드와 유전상수 특성 (Properties of Dielectric Constant and Bonding Mode of Annealed SiOCH Thin Film)

  • 김종욱;황창수;박용헌;김홍배
    • 한국전기전자재료학회논문지
    • /
    • 제22권1호
    • /
    • pp.47-52
    • /
    • 2009
  • We studied the electrical characteristics of low-k SiOCH interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). BTMSM precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1 sccm step with the constant flow rate of 60 sccm $O_2$ in process chamber. The vibrational groups of SiOCH thin films were analyzed by FT!IR absorption lines, and the dielectric constant of the low-k SiOCH thin films were obtained by measuring C-V characteristic curves. The heat treatment on SiOCH thin films reduced the FTIR absorption intensity of the Si-O-$CH_3$ bonding group and Si-$CH_3$ bonding group but increased the intensity of Si-O-Si(C) bonding group. The SiOCH ILD films could have low dielectric constant $k\;{\simeq}\;2$ and also be reduced further by decreasing the $CH_3$ group density and increasing Si-O-Si(C) group density through annealing process.

수평관 외벽에서 친수성 표면처리가 응축열전달에 미치는 영향 (Effects of Hydrophilic Surface Treatment on Condensation Heat Transfer at the Outside Wall of Horizontal Tube)

  • 황규대;박노성;강병하
    • 설비공학논문집
    • /
    • 제12권6호
    • /
    • pp.533-540
    • /
    • 2000
  • Condensation heat transfer characteristics have been investigated experimentally when a water vapor is condensed on the outside of a horizontal copper tube in a condenser. This problem is of particular interest in the design of a LiBr-water absorption system. Hydrophilic surface modification was performed to increase the wettability on the copper tube. The optimum hydrophilic treatment condition using acethylene and nitrogen as reaction gas is also studied in detail. The results obtained indicate that the optimum reaction gas ratio of acethylene to nitrogen for hydrophilic surface modification was found to be 7 : 3 for the best condensation heat transfer. In the wide ranges of coolant inlet temperatures, and coolant mass flow rates, both the condensation heat transfer rate and the condensation heat transfer coefficient of a hydrophilic copper tube are increased substantially, compared with those of a conventional copper tube used in a condenser. It is also found that the condensation heat transfer enhancement by the hydrophilic surface modification still emains even after a hundred cycles of wet/dry processes.

  • PDF

MoS2 나노시트의 TiO2 나노선에 수직 성장을 통한 광전기화학반응 향상 (Enhanced Photoelectrochemical Reaction of MoS2 Nanosheets Vertically Grown on TiO2 Nanowires)

  • 서동범;김의태
    • 한국재료학회지
    • /
    • 제31권2호
    • /
    • pp.92-96
    • /
    • 2021
  • We report the growth and enhanced photoelectrochemcial (PEC) water-splitting reactivity of few-layer MoS2 nanosheets on TiO2 nanowires. TiO2 nanowires with lengths of ~1.5 ~ 2.0 ㎛ and widths of ~50~300 nm are synthesized on fluorine-doped tin oxide substrates at 180 ℃ using hydrothermal methods with Ti(C4H9O)4. Few-layer MoS2 nanosheets with heights of ~250 ~ 300 nm are vertically grown on TiO2 nanowires at a moderate growth temperature of 300 ℃ using metalorganic chemical vapor deposition. The MoS2 nanosheets on TiO2 nanowires exhibit typical Raman and ultraviolet-visible light absorption spectra corresponding to few-layer thick MoS2. The PEC performance of the MoS2 nanosheet/TiO2 nanowire heterostructure is superior to that of bare TiO2 nanowires. MoS2/TiO2 heterostructure shows three times higher photocurrent than that of bare TiO2 nanowires at 0.6 V. The enhanced PEC photocurrent is attributed to improved light absorption of MoS2 nanosheets and efficient charge separation through the heterojunction. The photoelectrode of the MoS2/TiO2 heterostructure is stably sustained during on-off switching PEC cycle.

국내 천문대 상공의 수증기량 조건과 적외선 관측 (PRECIPITABLE WATER VAPOR CONDITIONS FOR INFRARED OBSERVATIONS AT KOREAN ASTRONOMICAL OBSERVATORIES)

  • 이성호;백정호;문봉곤;진호;조정호;차상목;조승현;박영식;육인수;남욱원;박수종
    • Journal of Astronomy and Space Sciences
    • /
    • 제24권4호
    • /
    • pp.339-348
    • /
    • 2007
  • 한국천문연구원은 $1\;-\;5{\mu}m$ 파장영역에서 관측 가능한 근적외선 카메라 KASINICS(Korea Astronomy and Space science Institute Near Infrared Camera System)를 개발하였다. 열적외선이 강해지는 $3{\mu}m$ 이상의 파장영역에서는 대기 중의 수증기에 의한 대기투과도가 중요해진다. 이 논문에서는 국내 천문대의 적외선 관측 조건을 알아보기 위해 한국천문연구원의 GPS 신호를 이용한 PWV(Precipitable Water Vapor) 측정 시스템을 사용하여 2006년 7월부터 2007년 8월까지의 보현산 및 소백산 상공의 월별 PWV 분포를 조사하였다. 그 결과, 국내 대기 수증기량 조건은 지표면의 이슬점온도를 이용해서 추정한 예상보다 좋았으며, 특히 가을철 및 겨울철에는 미국 Kitt Peak 천문대 상공의 조건과 비교하여 크게 다르지 않음을 확인하였다.

수직관내(垂直管內)를 흘러내리는 액막식(液膜式) 흡수기(吸收器)의 흡수(吸收) 및 열전달특성(熱傳達特性)(제(第)2보(報) 열전달특성(熱傳達特性)) (Characteristics of Absorption and Heat Transfer for Film Falling along a Vertical Inner Tube (2nd. Report, Characteristics of Heat Transfer))

  • 엄기찬;이동호;최국광;카시와기 타카오;서정윤
    • 설비공학논문집
    • /
    • 제5권4호
    • /
    • pp.257-264
    • /
    • 1993
  • This is the second report of a three part study on the absorption and heat transfer characteristics of absorber, the correlation of refrigerating capacity and heating capacity. The 2nd report deals with the heat transfer characteristics of a vertical falling film type absorber of inner copper tube. The solute is LiBr-Water solution(60wt%) and the solvent is water vapor. The film Reynoles numbers are varied in the range of 35~130. The states of LiBr solution at the top of absorber are supercooled liquid and superheated liquid. The results are summarized as follows ; Heat transfer results reveal that for the absorption of falling film, the state of LiBr solution appears to be influential in determining the heat transfer. Thus, for the state of supercooled liquid, heat transfer coefficient decreases with increasing the film Reynolds number, but in the condition of superheated liquid, it increases conversely. The mass transfer coefficients that were presented in the 1st.report and heat transfer coefficients of this paper are presented as the dimensionless correlation. The optimum water flowrate which brings about maximum value of heat flux in the film exists, and that increases with increasing the cooling water temperature.

  • PDF