• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.185-187
• /
• 2000

Fault current is flowed into 154/23kV M. Tr when line-to-ground fault occurs in power system. NGR(Neutral Grounded Reactor) is set up in order to prevent M.Tr fault by limiting magnitude of fault currents. Here, disconnection of NGR causes voltage increase by L-C resonance and line-to-ground fault in an unearthed system results in voltage increase at healthy phases. So Over Voltage Ground Relay(OVGR) is used for tripping M.Tr. Also, buses at second phases of M.Trs are all connected with section circuit breakers closed for the purpose of parallel operation and load shedding. In case of speciality buses are comprised of power cable in part for GIS connection. When no-load charged cable or bus is open by a section CB, unbalanced voltage charged on the bus is induced. Also discrepant opening time for circuit breakers on different phases gives rise to unbalanced zero sequence voltage. It was observed that this zero sequence voltage detected in the 22.9kV P.T (Potential Transformer for bus) mal-operated 59GT and tripped M.Tr. The zero sequence voltage of which vanishing time is longer than relay operating time came out by EMTDC simulation. Also, it was shown that the voltage waves of actual test are similar to those of simulation. On the basis of above results, R-C circuit complement on the relay without any effect on a power system made operating time of the relay longer than vanishing time of distorted waves. Consequently, operating time of the relay was delayed and magnitude of distorted waves was decreased by increasing time constant of the relay.

• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.213-223
• /
• 2009

Taylor-Couette flow (i.e., flow between concentric, rotating cylinders) has long served as a paradigm for studies of hydrodynamic stability. For Newtonian fluids, the rich cascade of transitions from laminar, Couette flow to turbulent flow occurs through a set of well-characterized flow states (Taylor Vortex Flow, wavy Taylor vortices, modulated wavy vortices, etc.) that depend on the Reynolds numbers of both the inner and outer cylinders ($Re_i$ and $Re_o$). While extensive work has been done on (a) the effects of weak viscoelasticity on the first few transitions for $Re_o=0$ and (b) the effects of strong viscoelasticity in the limit of vanishing inertia ($Re_i$ and $Re_o$ both vanishing), the viscoelastic Taylor-Couette problem presents an enormous parameter space, much of which remains completely unexplored. Here we describe our recent experimental efforts to examine the effects of drag reducing polymers on the complete range of flow states observed in the Taylor-Couette problem. Of particular importance in the present work is 1) the rheological characterization of the test solutions via both shear and extensional (CaBER) rheometry, 2) the wide range of parameters examined, including $Re_i$, $Re_o$ and Elasticity number E1, and 3) the use of a consistent, conservative protocol for accessing flow states. We hope that by examining the stability changes for each flow state, we may gain insights into the importance of particular coherent structures in drag reduction, identify simple ways of screening new drag reducing additives, and improve our understanding of the mechanism of drag reduction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.550-563
• /
• 1999

A wavelet-Galerkin scheme based on the time-dependent Maxwell's equations is presented. Daubechies wavelet with two vanishing wavelet moments is expanded for basis function in spatial domain and Yee's leap-frog approach is applied. The shifted interpolation property of Daubechies wavelet family leads to the simplified formulations for inhomogeneous media without the additional matrices for the integral or material operator. The stability condition is formulated. The dispersion characteristics are analyzed and compared with those of finite difference time domain and multiresolution time domain methods. The analyses show the excellent trade-off between the regularity and the support width of the basis function. Although the basis function has only two vanishing wavelet moments, it is enough to provide negligible dispersive error in the numerical analysis and its compact support enables only several involved terms per nodes. The storage effectiveness, execution time reduction and accuracy of this scheme are demonstrated by calculating the resonant frequencies of the homogeneous and inhomogeneous cavities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.577-582
• /
• 2004

This paper describes position estimation algorithm using neural network for the navigation of the vision-based Wheeled Mobile Robot (WMR) in a corridor with taking ceiling lamps as landmark. From images of a corridor the lamp's line on the ceiling in corridor has a specific slope to the lateral position of the WMR. The vanishing point produced by the lamp's line also has a specific position to the orientation of WMR. The ceiling lamps has a limited size and shape like a circle in image. Simple image processing algorithms are used to extract lamps from the corridor image. Then the lamp's line and vanishing point's position are defined and calculated at known position of WMR in a corridor To estimate the lateral position and orientation of WMR from an image, the relationship between the position of WMR and the features of ceiling lamps have to be defined. Data set between position of WMR and features of lamps are configured. Neural network are composed and teamed with data set. Back propagation algorithm(BPN) is used for learning. And it is applied in navigation of WMR in a corridor.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.56-65
• /
• 2004

This study divides the expression techniques of Zaha Hadid into various types who has manipulated her targeted drawings as her unique design tools in the process of architectural design, analyzes them in terms of the vanishing point, visual point for observation and object of observation and attempts to figure out how the multi-visual expression is applied in the conception of form and space and method of observation. By doing so, this study will suggest the characteristics of the expression techniques using multi-visual. Through the above study, the utilization and characteristics of multi-visual expression of the architecture design process of Zaha Hadid are summarized as follows. Firstly, Zaha Hadid utilizes the strained multi-visual perspective technique which can look out over the interaction between masses simultaneously at multi-angles by changing a perspective drawing of vanishing point 1, 2, and 3. Secondly, it utilizes a landscape perspective technique and embodies an Idea of landscape's spatial arrangement through it as the means to search a dynamic relation of architecture, city, land, and space. Thirdly, there is a projected expression using X-ray perspective technique to make the relations between inside and outside of building to three-dimension volume. Zaha Hadid has used the expression techniques using multi-visual by utilizing various points and has developed and used them as her creative tools for idea. By means of escaping from the expression techniques of simple revival, she has used a new expression technique that can represent recognized space. In the past, the content could change the expression techniques in architecture; however, the liberation of architectural expression techniques can change the content in modern times when require new attempts.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.93-104
• /
• 1999

Existing composting system was improved to have a high performance for organic degradation, deodorization and energy reduction. Compared with conventional devices, this developed system uses the heat recovered from platinum catalytic tower by three times heat exchange in which 65% of exhaust gas was recirculated. Evaporation of water was made easy by maintaining negative pressure in entire system. It was possible for reaction to be maintained steadily by microorganism agent. The optimum mixing volume ratio of garbage to sawdust was 15:1 contrary to 20:1 in conventional one. Moreover, aerobic condition was maintained efficiently. Effects obtained by using a inner circulation system were as follows. It was possible to reduce the ammonia causing offensive odor and verified that consumption of electricity cut down to 1/3 with reduction of exhaust gas inflowing. According to this inner circulation, the optimum air flow was $0.44m^3$ to 100kg treatment capacity. The electricity consumption was changed in proportion to inflowing air volume.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.651-662
• /
• 2010

This paper describes a method to identify objects for autonomous navigation of an outdoor mobile robot. To identify objects, the robot recognizes the object from an image taken by moving robot on outdoor environment. As a beginning, this paper presents the candidates for a segment of region to building of artificial object, sky and trees of natural objects. Then we define their characteristics individually. In the process, we segment the regions of the objects included by preprocessing using multiple features. Multiple features are HSI, line segments, context information, hue co-occurrence matrix, principal components and vanishing point. An analysis of building identifies the geometrical properties of building facet such as wall region, windows and entrance. The building as intersection in vertical and horizontal line segment of vanishing point extracts the mesh. The wall region of building detect by merging the mesh of the neighbor parallelograms that have similar colors. The property estimates the number of story and rooms in the same floors by merging skewed parallelograms of the same color. We accomplish the result of image segmentation using multiple features and the geometrical properties analysis of object through experiments.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1398-1400
• /
• 1996

In this paper, a method of the decision of the road direction for ALV(Autonomous Land Vehicle) road following by region-based segmentation is presented. The decision of the road direction requires extracting road regions from images in real-time to guide the navigation of ALV on the roadway. Two thresholds to discriminate between road and non-road region in the image are easily decided, using knowledge of problem region and polygonal approximation that searches multiple peaks and valleys in histogram of a road image. The most likely road region of the binary image is selected from original image by these steps. The location of a vanishing point to indicate the direction of the road can be obtained applying it to X-Y profile of the binary road region again. It can successfully steer a ALV along a road reliably, even in the presence of fluctuation of illumination condition, bad road surface condition such as hidden boundaries, shadows, road patches, dirt and water stains, and unusual road condition. Pyramid structure also saves time in processing road images and a real-time image processing for achieving navigation of ALV is implemented. The efficacy of this approach is demonstrated using several real-world road images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.676-678
• /
• 2010

Conventional Augmented Reality has used data gloves or markers for smooth interaction between objects and background. This causes inconvenience of use and lower immersion. To build up immersion in Augmented Reality, additional input devices must be removed. This paper proposes a method to create virtual space coordinates for interaction without wearing additional input devices so as to improve immersion in Augmented Reality. The acquired image was projected to a two-dimensional space and vanishing lines were extracted to calculate the virtual space coordinates. Then the sizes of the inserted objects were varied in accordance with the size of the virtual coordinates area based on the image projected onto the two-dimensional coordinates. This resulted in improved immersion. This method can increase the efficiency of object creation by excluding the use of a 3D modeler for creation of three-dimensional objects.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.135-151
• /
• 2012

Traditionally in IS studies, the relationship between construct and its measurement items tends to be assumed to be reflective, meaning that the measurements are a reflection of the construct. In reality, however, the nature of the construct can be often formative, which means that its measurement items describe and define the construct rather than vice versa. The purpose of this study was to investigate theoretical and empirically-analysed differences between formative construct and reflective construct through comprehensive interdisciplinary literature review. And then on the basis of these differences, we intended to derive the rule of specifying whether the construct is formative or reflective and propose the methodology of testing the validity(content validity, construct validity, internal consistency and external construct) of formative construct and its measurements, differentiated from that in the case of reflective construct. Also, we suggested the concrete statistical testing methods such as VTT(Vanishing Tetrad Test), MIMIC(Multiple Indicators and Multiple Causes) test and multi-collinearity test. In order to examine the applicability of this methodology to developing the constructs for performance evaluation of IS(Information Systems), we tried to identify its attribute(formative or reflective) and test the validity for the construct arbitrarily chosen among them which had been derived in our previous IS performance evaluation study by using this methodology. The result of the examination was that the methodology proposed in this study was significantly valid and effective in the area of IS performance evaluation.