• 제목/요약/키워드: Vanadium oxide

검색결과 165건 처리시간 0.03초

전해질 첨가제가 리튬 바나듐 옥사이드 전극의 성능에 미치는 영향 (Effect of Electrolyte Additive on the Electrochemical Characteristics of Lithium Vanadium Oxide Anode)

  • 이제남
    • 전기화학회지
    • /
    • 제21권3호
    • /
    • pp.55-60
    • /
    • 2018
  • 최근 휴대용 기기의 급속한 발전이 이뤄지고, 다양한 전자제품에서 높은 성능의 이차 전지가 요구됨에 따라 고에너지밀도 특성을 가능케 하는 전극 재료의 연구가 주목받고 있다. 음극의 경우, 기존에 사용하고 있는 흑연재료를 대체하기 위하여 실리콘, 주석 등의 소재와 전이금속 산화물을 새로운 음극재료로 사용하려고 한다. 리튬 바나듐 옥사이드는 리튬 전이금속 산화물 기반의 음극 소재로서 흑연 대비 1.5배의 부피당 용량을 나타낼 수 있다는 장점을 가지고 있으나, 낮은 전기전도도와 입자 파쇄현상으로 인하여 전해질의 분해가 가속화되어 성능이 열화되는 문제점을 가지고 있다. 본 연구에서는 이러한 문제를 개선시키기 위하여 전해질 첨가제를 도입하여 전극/전해질 계면의 개질에 따른 리튬 바나듐 옥사이드의 전기화학적 거동 특성을 보고자 하였다.

진공 어닐링한 바나듐 산화악의 구조적, 전기적 특성 (Structural and Electrical Properties of Vanadium Oxide Thin Films Annealed in Vacuum)

  • 최복길;최창규;권광호;김성진
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권1호
    • /
    • pp.1-7
    • /
    • 2005
  • Thin films of vanadium oxide(VO/sub x/) were deposited by r.f. magnetron sputtering from V₂O/sub 5/ target with oxygen/(oxygen+argon) partial pressure ratio of 0% and 8% and in situ annealed in vacuum at 400℃ for 1h and 4h. Crystal structure, chemical composition, molecular structure, optical and electrical properties of films were characterized through XRD, XPS, RBS, FTIR, optical absorption and electrical conductivity measurements. The films as-deposited are amorphous, but 0%O₂ films annealed for time longer than 4h and 8% O₂ films annealed for time longer than 1h are polycrystalline. As the oxygen partial pressure is increased the films become more stoichiometric V₂O/sub 5/. When annealed at 400℃, the as-deposited films are reduced to a lower oxide. The optical transmission of the films annealed in vacuum decreases considerably than the as-deposited films and the optical absorption of all the films increases rapidly at wavelength shorter than about 550nm. Electrical conductivity and thermal activation energy are increased with increasing the annealing time and with decreasing the oxygen partial pressure.

온도 의존성 가변 저항 발열체로 표면 처리된 금속 분리판 제조 및 평가 (Synthesis and Evaluation of Variable Temperature-Electrical Resistance Materials Coated on Metallic Bipolar Plates)

  • 정혜미;노정훈;임세준;이종현;안병기;엄석기
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.73.1-73.1
    • /
    • 2010
  • For the successful cold starting of a fuel cell engine, either internal of external heat supply must be made to overcome the formation of ice from water below the freezing point of water. In the present study, switchable vanadium oxide compounds as variable temperature-electrical resistance materials onto the surface of flat metallic bipolar plates have been prepared by a dip-coating technique via an aqueous sol-gel method. Subsequently, the chemical composition and micro-structure of the polycrystalline solid thin films were analyzed by X-ray diffraction, X-ray fluorescence spectroscopy, and field emission scanning electron microscopy. In addition, it was carefully measured electrical resistance hysteresis loop over a temperature range from $-20^{\circ}C$ to $80^{\circ}C$ using the four-point probe method. The experimental results revealed that the thin films was mainly composed of Karelianite $V_2O_3$ which acts as negative temperature coefficient materials. Also, it was found that thermal dissipation rate of the vanadium oxide thin films partially satisfy about 50% saving of the substantial amount of energy required for ice melting at $-20^{\circ}C$. Moreover, electrical resistances of the vanadium-based materials converge on an extremely small value similar to that of pure flat metallic bipolar plates at higher temperature, i.e. $T{\geq}40^{\circ}C$. As a consequence, experimental studies proved that it is possible to apply the variable temperature-electrical resistance material based on vanadium oxides for the cold starting enhancement of a fuel cell vehicle and minimize parasitic power loss and eliminate any necessity for external equipment for heat supply in freezing conditions.

  • PDF

스퍼터링으로 퇴적시킨 바나듐 산화막의 구조적, 광학적 특성 (Structural and optical properties of sputtered vanadium pentoxide thin films)

  • 최복길;신규호;정상진;최창규;김성진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.746-748
    • /
    • 1998
  • Thin films of vanadium pentoxide ($V_{2}O_{5}$) have been deposited by r.f. magnetron sputtering from $V_{2}O_{5}$ target in gas mixture of argon and oxygen. Crystal structure, surface morphology, surface composition and optical properties of films prepared under different substrates are characterized through XRD, SEM, AES, XPS and optical absorption measurements. The films prepared below $100^{\circ}C$ are amorphous, and those prepared above $200^{\circ}C$ are polycrystalline. Thermally Induced oxidation of films into higher oxide has been observed with increasing substrate temperature. Vanadium oxide films show two optical absorption bands indicating the presence of direct and indirect transitions.

  • PDF

고에너지 밀도 바나듐 레독스 흐름 전지를 위한 망간산화물 촉매와 다공성 탄소 기재의 시너지 효과 (Synergistic Effect of the MnO Catalyst and Porous Carbon Matrix for High Energy Density Vanadium Redox Flow Battery)

  • 김민성;고민성
    • 한국표면공학회지
    • /
    • 제52권3호
    • /
    • pp.150-155
    • /
    • 2019
  • The carbon electrode was modified through manganese-catalyzed hydrogenation method for high energy density vanadium redox flow battery (VRFB). During the catalytic hydrogenation, the manganese oxide deposited at the surface of the carbon electrode stimulated the conversion reaction from carbon to methane gas. This reaction causes the penetration of the manganese and excavates a number of cavities at electrode surface, which increases the electrochemical activity by inducing additional electrochemically active site. The formation of the porous surface was confirmed by the scanning electron microscopy (SEM) images. Finally, the electrochemical performance test of the electrode with the porous surface showed lower polarization and high reversibility in the cathodic reaction compared to the conventional electrode.

양극전착을 통한 그래핀-바나듐 산화물 복합체 제조 및 전기화학적 특성평가 (Electrochemical Properties of Graphene-vanadium Oxide Composite Prepared by Electro-deposition for Electrochemical Capacitors)

  • 정희영;정상문
    • Korean Chemical Engineering Research
    • /
    • 제53권2호
    • /
    • pp.131-136
    • /
    • 2015
  • 본 연구에서는 전극 활물질로서 그래핀-바나듐 산화물 복합체를 pH 1.8 조건에서 0.5M $VOSO_4$ 수용액을 이용하여 전기화학적 전착을 이용해 합성하였다. 전착공정 후 다공성 바나듐 산화물이 작업전극에 생성된 것을 SEM, XRD, XPS를 통해 확인하였으며 생성된 바나듐 산화물은 $V^{5+}$$V^{4+}$로 존재한다. 그래핀에 전착된 바나듐 산화물의 직경 약 100 nm의 나노로드로 이루어진 망상 구조는 전극과 전해질과의 접촉을 향상시킨다. 4000 초의 전착공정을 거친 그래핀-바나듐 산화물 복합체를 작업전극으로 하여 3전극 셀에서 전기화학적 특성을 평가한 결과 20 mV/s의 주사속도에서 $854mF/cm^2$의 높은 정전용량을 나타내었고 1000회 충방전 후 초기 용량의 53%가 유지되었다.

금속환원법에 의한 바나듐 분말 추출 (Extraction of Vanadium Powder by Metallothermic Reduction)

  • 이동원;허상현;염종택;왕제필
    • 한국분말재료학회지
    • /
    • 제20권1호
    • /
    • pp.43-47
    • /
    • 2013
  • The extraction of metallic pure vanadium powder from raw oxide has been tried by Mg-reduction. In first stage, $V_2O_5$ powders as initial raw material was reduced by hydrogen gas into $V_2O_3$ phase. $V_2O_3$ powder was reduced in next stage by magnesium gas at 1,073K for 24 hours. After reduction reaction, the MgO component mixed with reduced vanadium powder were dissolved and removed fully in 10% HCl solution for 5 hours at room temperature. The oxygen content and particle size of finally produced vanadium powders were 0.84 wt% and 1 ${\mu}m$, respectively

Selective doping of Li-rich layered oxide cathode materials for high-stability rechargeable Li-ion batteries

  • Han, Dongwook;Park, Kwangjin;Park, Jun-Ho;Yun, Dong-Jin;Son, You-Hwan
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제68권
    • /
    • pp.180-186
    • /
    • 2018
  • We report the discovery of Li-rich $Li_{1+x}[(Ni_{0.225}Co_{0.15}Mn_{0.625})_{1-y}V_y]O_2$ as a cathode material for rechargeable lithium-ion batteries in which a small amount of tetravalent vanadium ($V^{4+}$) is selectively and completely incorporated into the manganese sites in the lattice structure. The unwanted oxidation of vanadium to form a $V_2O_5-like$ secondary phase during high-temperature crystallization is prevented by uniformly dispersing the vanadium ions in coprecipitated $[(Ni_{0.225}Co_{0.15}Mn_{0.625})_{1-y}V_y](OH)_2$ particles. Upon doping with $V^{4+}$ ions, the initial discharge capacity (>$275mA\;h\;g^{-1}$), capacity retention, and voltage decay characteristics of the Li-rich layered oxides are improved significantly in comparison with those of the conventional undoped counterpart.

스퍼터된 바나듐 산화막의 구조적 특성에 미치는 산소 분압의 효과 (Effects of Oxygen Partial Pressure on the Structural Properties of Sputtered Vanadium Oxide Thin Films)

  • 최복길;최용남;최창규;권광호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.435-438
    • /
    • 2001
  • Thin films of vanadium oxide(VO$\sub$x/) have been deposited by r.f. magnetron sputtering from V$_2$O$\sub$5/ target in gas mixture of argon and oxygen. The oxygen/(oxygen+argon) partial pressure ratio is changed from 0% to 8%. Crystal structure, chemical composition and bonding properties of films sputter-deposited under different oxygen gas pressures are characterized through XRO, XPS, RBS and FTIR measurements. All the films prepared below 8% O$_2$ are amorphous, and those prepared without oxygen are gray indicating the presence of V$_2$O$\sub$$_4$/ phase in the films. V$_2$O$\sub$5/ and lower oxides co-exist in sputter-deposited films and as the oxygen partial pressure is increased the films become more stoichiometric V$_2$O$\sub$5/. The increase of O/V ratio with increasing oxygen gas pressure is attributed to the partial filling of oxygen vacancies through diffusion. It is observed that the oxygen atoms. located on the V-O plane of V$_2$O$\sub$5/ layer participate more readily in the oxidation process.

  • PDF

스퍼터된 바나듐 산화막의 광학적 특성에 미치는 진공 어닐링의 효과 (Effects of Vacuum Annealing on the Optical Properties of Sputtered Vanadium Oxide Thin Films)

  • 이승철;황인수;최복길;최창규;김성진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.783-786
    • /
    • 2003
  • Thin films of vanadium oxide(VOx) have been deposited by r.f. magnetron sputtering from $V_2O_5$ target in gas mixture of argon and oxygen. The oxygen/(oxygen+argon) partial pressure ratio of 0% and 8% is adopted. Crystal structure and optical properties of films sputter-deposited under different oxygen gas pressures and in situ annealed in vacuum at $400^{\circ}C$ for 1h and 4h are characterized through XRD and optical absorption measurements. The films as-deposited are amorphous, but $0%O_2$ films annealed for time longer than 4h and $8%O_2$ films annealed for time longer than 1h are polycrystalline. The optical transmission of the films annealed in vacuum decreases considerably than the as-deposited films and the optical absorption of all the films increases rapidly at wavelength shorter than about 550nm. Indirect and direct optical band gaps were decreased with increasing the annealing time.

  • PDF