• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.149-155
• /
• 2005

Was used at step space-time mainly after VE technique sponsors in domestic in the 1960s but have been expanded to design step recently. Possibility of value elevation or cost reduction must choose member that is effectively for active and effective application of VE technique. In this study, when enforce design VE examining for weight decision corrosion protection been using in weight grant composition estimation technique, target choice process wishes to suggest formality and method that can be achieved effectively. Main conclusion of this study sorts valuation items step by step for weight appropriation of valuation basis and give point on article of high position point after expert which employer is included estimates article by low rank step and this presented high position method that do union itembyitemandestablishesbyitemweight. Did these techniques for giving weights so that importance for weight appropriation developed estimation program, and data save of target estimation standard and target estimation standard is possible using straight sit.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.735-741
• /
• 2011

In this paper, we have analyzed the effect of SNR estimation error on the BER performance of MMSE-DFE in high-speed binary CDMA system. Since MMSE equalization algorithm requires the SNR value of input signal, it should be estimated using CAZAC sequence in preamble. However, when AWGN and ISI exist simultaneously, it is impossible to estimate the exact SNR value of input signal and thereby equalizer's performance may be deteriorated. The simulation results can be used as a guideline for selection of SNR estimation algorithm for MMSE-DFE design.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.83-91
• /
• 1997

A reactor vibration monitoring has been performed using neutron noise obtained from excore detectors for the safety operation, Traditionally, the spectral estimator based on Fourier analysis has been widely used in the noise analysis of the reactor system. If the bias is too severe, the resolution would not be adequate for a given application. One major motivation for the current interests in the parametric approach to spectral estimation is the apparent higher resolution achievable with these modern techniques. In considering an unbias, a consistency, an efficency, and a minimum lower bound of the statictic estimation, an AR model is appropriate for noise spectral estimation with sharp peaks but not deep valley. In order to select an appropriate model order, the lag value of autocorrleaton function is applied. Burg method to trace the vibration mode of RPV internal is the most sucuessful.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.400-404
• /
• 2015

In this paper, we study for direction of arrival MUSIC spatial spectrum algorithm in order to desired signal estimation in spatial. Proposal MUSIC spatial spectrum algorithm in paper use model error and Bayesian method to estimation on correct target position. Receiver array response vector using adaptive array antenna use Bayesian method, and target position estimate to update weight value with model error method. Target's signal estimation of desired direction of arrival in this paper apply weight value of signal covariance matrix for array response vector after removing incident signal interference and noise, respectively. Though simulation, we analyze to compare proposed method with general method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.612-617
• /
• 2009

In a DCT coding, degradations called block artifact and mosquito noise are appeared in reconstructed pictures. They should be reduced in post processing after decoding without superabundant processing. However, an estimation of mosquito noise is rare because of its difficulty. To realize an estimation of mosquito noise level, we extract a block that mosquito noise will be easy to occur. Mosquito noise level is calculated at a selected side of the block. In this processing, only the sides of high probability block are used. Then, a block value is taken by averaging. Finally, the picture value is calculated by averaging of this. Estimation method is evaluated by using the MPEG-4 decoded pictures. Quantization scale of coding and the estimated mosquito noise level are compared. As the results, we recognize the proposed method gives almost reasonable mosquito block and absolute level. Father, adaptive filter is controlled by the estimated mosquito noise level. It is recognized that the high quality of decoded picture is kept and the mosquito noise is reduced effectively at the picture with degradation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.254-259
• /
• 2010

In this paper, we propose a low-complexity carrier frequency offset (CFO) estimation algorithm for OFDM based wireless LAN, IEEE 802.11a. The complexity of the arctangent operation to calculate the argument of auto-correlation for CFO estimation is reduced by a novel range pointer method. The proposed algorithm estimates fine CFO value first and then based on the fine CFO value, simple criteria is used for the boundary decision of integer CFO estimation. The simulation results show that the performance of the proposed algorithm is slightly better than the conventional method while the computational complexity is reduced by 50%. Furthermore, the proposed method can be easily implemented for the low complex next generation MIMO-OFDM based WLAN systems.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.755-762
• /
• 2013

In this paper we consider the NHPP software reliability model. And we deal with the maximum likelihood estimation and the Bayesian estimation with conjugate prior for parameter inference in the mean value function of Goel-Okumoto model (1979). The parameter estimates for the proposed model is presented by MLE and Bayes estimator in data set. We compare the predicted number of faults with the actual data set using the proposed mean value function.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.124-132
• /
• 2018

This paper presents a shelf life assessment for K-1 military gas masks in the Republic of Korea using test data of Chemical Materiels Stockpile Reliability Program(CSRP). For the shelf life assessment, over 2,500 samples between 2006 and 2015 were collected from field tests and analyzed to estimate a probability of proper and improper functionality using Bayesian estimation. For this, three stages were considered; a pre-processing, a processing and an assessment. In the pre-processing, major components which directly influence the shelf life of the mask were statistically analyzed and selected by applying principal component analysis from all test components. In the processing, with the major components chosen in the previous stage, both proper and improper probability of gas masks were computed by applying Bayesian estimation. In the assessment, the probability model of the mask shelf life was analyzed with respect to storage periods between 0 and 29 years resulting in between 66.1 % and 100 % performances in accuracy, sensitivity, positive predictive value, and negative predictive value.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.210-216
• /
• 2006

In the rule based modeling, data partitioning plays crucial role be cause partitioned sub data set implies particular information of the given data set or system. In this paper, we present an empirical study result of the data pattern estimation to find underlying data patterns of the given data. Presented method performs crisp type clustering with given n number of data samples by means of the sequential agglomerative hierarchical nested model (SAHN). In each sequence, the average value of the sum of all inter-distance between centroid and data point. In the sequel, compute the derivation of the weighted average distance to observe a pattern distribution. For the final step, after overall clustering process is completed, weighted average distance value is applied to estimate range of the number of clusters in given dataset. The proposed estimation method and its result are considered with the use of FCM demo data set in MATLAB fuzzy logic toolbox and Box and Jenkins's gas furnace data.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.427-435
• /
• 2023

Cardinality estimation is used in wide range of applications and a fundamental problem processing a large range of data. While the internet moves into the era of big data, the function addressing cardinality estimation use only on-chip cache memory. To use memory efficiently, there have been various methods proposed. However, because of the noises between estimator, which is data structure per flow, loss of accuracy occurs in these algorithms. In this paper, we focus on minimizing noises. We propose multiple data structure that each estimator has the number of estimated value as many as the number of structures and choose the minimum value, which is one with minimum noises, We discover that the proposed algorithm achieves better performance than the best existing work using the same tight memory, such as 1 bit per flow, through experiment.