• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.17-23
• /
• 2010

The corporate R&D(Research and Development) has a primary role of new product development and its potential is the most crucial factor to estimate corporate future value. However, its systemic inadequacies and inefficiencies, the shorten product life-cycle to satisfy customer needs, the global operations by outsourcing strategy, and the reduction of product cost, are starting to expose to R&D business processes. The three-phased execution strategy for R&D innovation is introduced to establish master plan for new R&D model. From information technology point of view, PLM(Product Life-cycle Management) is one of the business total solutions in product development area. It is not a system, but the strategic business approach that collaboratively manage the product from beginning stage to end of life in all business areas PLM functions and capabilities are usually used as references to re-design new R&D process. BPA(Business Process Assessment) and 5DP(Design Parameters) in PI6sigma developed by Samsung SDS Consulting division are introduced to establish R&D master plan and re-design process respectively. This research provides a case study for R&D process innovation. How process assessment and PMM(Process Maturity Model) can be applied in business processes, and also it explains process re-design by 5DP method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.129-137
• /
• 2015

The study aims at quantifying the effect of nano technology in the fields of economics and social aspects by using the methodology of system dynamics. A case study which using selenium oxide nanoparticles as additive agent in order to enhance fuel efficiency was selected as an example of nano technology in economic and societal benefits. Additionally, models for exhaust gas from combustion of fuel (diesel) and related issues are developed to evaluate real-time assessment of the effect of nano technology. It was found that the selenium oxide nanoparticles increase fuel efficiency, and it also affects on the amount of exhaust gas and the respiratory disease related issues. The results of this study which give quantitative value for the effect of nano technology can be used as objective references in development of national policy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2073-2078
• /
• 2016

Recently, there have been many research that recognize the situation using sensors. However, sensor data collection and analysis are still lacking in integration. This is because the data generated by the sensor is difficult to match in terms of metadata and units. Therefore, a methodology for efficiently using data generated from various sensors is needed. In this paper, we propose a system that recognizes the location through information generated from a moving iBeacon. This system constructs the ontology with the data that can recognize the exact position when the patient wearing iBeacon moves in the room. This maps standard items and sensor items, and stores the results of filtering the detected values as knowledge. the system can extract efficient location information by recognizing the value generated by moving the patient carrying iBeacon through the ontology. This can be applied not only to beacons but also to other sensors, and it can be applied variously according to the ontology configuration.

• Journal of Korea Trade
• /
• v.23 no.3
• /
• pp.20-37
• /
• 2019

Purpose - The purpose of this paper is to analyze the trade structure and competitiveness of China's information technology (IT) industry in comparison to that of Korea and the United States, particularly in terms of quality. Design/methodology/approach - Indices such as trade specialization index (TSI), Revealed Comparative Advantage (RCA), and Market Comparative Advantage (MCA) are used. Further, an Intra-industry Trade (IIT) index is used to analyze qualitative changes in horizontal intra-industry trade and intra-industry trade of high- and low-quality goods. Findings - China's IT industry has a comparative competitive advantage over that of Korea and the United States, and mainly exports goods of inferior quality and imports goods of superior quality. Further, China's horizontal intra-industry trade has been decreasing, while its vertical intra-industry trade has been increasing and vertical trade of inferior quality goods outweighs that of superior quality goods. This shows that China is rapidly catching up with Korea and the United States, even though its qualitative competitiveness has not significantly improved. Research limitations/implication - This study has academic and political implications, as it analyzes changes in China's IT trade competitiveness. However, it is somewhat limited as factors determining qualitative aspects has not been considered. Originality/value - Most studies aggregate analyses of export competitiveness using methodologies such as TSI, RCA, and market share. However, the focus of these methods is price competitiveness. Hence, an examination of the objective and qualitative trade competitiveness of China's IT industry is necessary. this study the trade structure and quantitative competitiveness of the industry by analyzing intra-industry trade focusing on the quality of competitiveness. Therefore, the changes in China's IT industry in the USA and Korea and in foreign trade competitiveness and quality competitiveness are clarified. The results show that the academic and policy implications of these changes in the IT industry will be a useful resource. This is the first study in Korea to attempt such an analysis. This is the first study in Korea to attempt such an analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.115-128
• /
• 2019

Small and Medium-sized Enterprises (SMEs) are being faced with rapid changes in their business environments due to evolution of technologies and innovation in societal eco-systems. Particularly, dynamic interactions between such environments and enterprise activities have become significant, so technology planning, which is a process of identifying appropriate directions regarding product and technology development, has received much attention to cope with such dynamics proactively. However, SMEs typically have limits in performing independent, strategical and systematical technology planning activities due to the lack of human, material and financial resources. This paper proposes the development of a product roadmapping method so that SMEs carry out efficient technology planning activities with interconnections of external business environments. The present work provides product roadmap templates that directly accommodate the influence of business environments on the product's system and its associated super/sub-systems with the use of external environment analysis techniques including TRIZ methodology, PEST and 5Forces analysis. These templates are useful to efficiently forecast the directions of product's development and evolution, which arise from changes in external environments. Consequently, the present work enables SMEs to flexibly cope with the era of the next R&D generation, which pursues value creation through mutual interconnection between business environments and technology development.

• Structural Monitoring and Maintenance
• /
• v.5 no.4
• /
• pp.463-488
• /
• 2018

In the last decades, research efforts have been spent to investigate the effect of prestressing on the dynamic behaviour of prestressed concrete (PSC) beams. Whereas no agreement has been reached among the achievements obtained by different Researchers and among the theoretical and the experimental results for simply supported beams, very few researches have addressed this problem in continuous PSC beams. This topic is, indeed, worthy of consideration bearing in mind that many relevant bridges and viaducts in the road and railway networks have been designed and constructed with this structural scheme. In this paper the attention is, thus, focused on the dynamic features of continuous PSC bridges taking into account the effect of prestressing. This latter, in fact, contributes to the modification of the distribution of the bending stress along the beam, also by means of the secondary moments, and influences the flexural stiffness of the beam itself. The dynamic properties of a continuous, two spans bridge connected by a nonlinear spring have been extracted by solving an eigenvalue problem in different linearized configurations corresponding to different values of the prestress force. The stiffness of the nonlinear spring has been calculated considering the mechanical behaviour of the PSC beam in the uncracked and in the cracked stage. The application of the proposed methodology to several case studies indicates that the shift from the uncracked to the cracked stage due to an excessive prestress loss is clearly detectable looking at the variation of the dynamic properties of the beam. In service conditions, this shift happens for low values of the prestress losses (up to 20%) for structure with a high value of the ratio between the permanent load and the total load, as happens for instance in long span, continuous box bridges. In such conditions, the detection of the dynamic properties can provide meaningful information regarding the structural state of the PSC beam.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.142-156
• /
• 2019

[Purpose] It aims to suggest the differential factors to enhance the customer satisfaction and to activate the shopping in the convenience store (CVS). [Methodology] Convenience store service convenience (CVS SERVCON) was developed at the first time and the gap of relative importance level between the owners and the consumers was assessed by AHP analysis method..[Findings] First, the importance of access convenience was assessed as the first priority in both CVS owners' group and the consumers' group, while the detailed elements showed the differences which required the improvements. Based on the consumers' assessment, the importance of location was relatively low. They assessed relatively high on 24 hours operation of CVS and personal services. Second with respect to the transaction convenience, CVS owners' group rated it as the fourth priority while the consumers' group rated as the second, which requires the improvement. Third in terms of benefit utility and value-added service of post-benefit convenience which are the sub-factors of benefit convenience, the rate on the importance from the consumers showed higher than that from the owners, which requires the improvement. [Implications] Based on this study results, CVS operating companies are anticipated to be able to satisfy the customers, moreover, to secure the loyal customers if they concentrate the resources to develop the differentiation strategy on the areas where the consumers' demands are high while performs the maintenance strategy on the areas where their demands are low. In addition, this study contributed the theoretical expansion of SERVCON upon development of CVS SERVCON to comply with its definition.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2022

UAM (Urban Air Mobility) is a new safe, secure, and more sustainable air transportation system for passengers and cargo in urban environments. Commercial operations of UAM are expected to start in 2025. Since production rates of UAM are expected to be closer to cars than conventional aircraft, the airworthiness methodology for UAM must be prepared for mass production. Composite materials are expected to be mainly used for UAM structures to reduce weight. In this paper, the composite material qualification method was derived and the materials were applied for small aircraft application. It is expected to reduce the airworthiness certification time by applying composite material qualification system and its database.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.176-182
• /
• 2023

With about 80% of the global economy expected to shift to the global market by 2030, exports of reverse direct purchase products, in which foreign consumers purchase products from online shopping malls in Korea, are growing 55% annually. As of 2021, sales of reverse direct purchases in South Korea increased 50.6% from the previous year, surpassing 40 million. In order for domestic SMEs(Small and medium sized enterprises) to enter overseas markets, it is important to come up with export strategies based on various market analysis information, but for domestic small and medium-sized sellers, entry barriers are high, such as lack of information on overseas markets and difficulty in selecting local preferred products and determining competitive sales prices. This study develops an AI-based product recommendation and sales price estimation model to collect and analyze global shopping malls and product trends to provide marketing information that presents promising and appropriate product sales prices to small and medium-sized sellers who have difficulty collecting global market information. The product recommendation model is based on the LTR (Learning To Rank) methodology. As a result of comparing performance with nDCG, the Pair-wise-based XGBoost-LambdaMART Model was measured to be excellent. The sales price estimation model uses a regression algorithm. According to the R-Squared value, the Light Gradient Boosting Machine performs best in this model.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.1116-1125
• /
• 2023

Zinc oxide film is a transparent conductive material and is used in optoelectronic devices in various fields. Therefore, characterization of the zinc oxide film will play a very important role in improving the performance of optoelectronic devices. Here, we will evaluate the morphological and structural characteristics of such a zinc oxide film based on the solution process. Specifically, the sol-gel method will be repeatedly performed to observe the change in material properties of the zinc oxide film according to the number of times of spin-coating. It was confirmed that crystallization proceeded as a result of performing the sol-gel method repetitively 5 times under constant solution conditions. At 7 times or more, the element composition and crystallinity tended to converge to a specific value. The average crystal size of the final zinc oxide film was calculated to be about 10.7 nm. In this study, the number of processes showing optimal crystallization was 7 times. The results and methodology of this study can be applied while varying various solution process variables and are expected to contribute to establishing optimal process conditions.