• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.15-22
• /
• 1993

This study was carried out to investigate the fracture criterion of glulam. The mixed mode fracture of glulam was investigated by means of single edge notched specimens with various crack inclination in the longitudinal-radial plane. While fracture of wood is not completely understood, the study on linear-elastic fracture mechanics is a rational and valuable tool for studying the strength behavior of glulam. The results are summarized as follows : 1. Glue line has no effect on fracture strength. 2. There is a definite interaction between fracture toughness $K_I$ and $K_{II}$ during the mixed mode fracture of glulam. Several criterions for mixed mode failure were compared. The criterion was expressed in the following form: $(\frac{K_I}{K_{IC}})^2+(\frac{K_{II}}{K_{IIC}})^2=1$ 3. As crack inclination increases, $K_{IC}$ value and $K_{IIC}$ value decreases. The equations relating crack angle to $K_{IC}$ and $K_{IIC}$, respectively, were obtained as follows; $K_{IC}$ = -77.42${\gamma}$+153.72 ($R^2$ = 0.78) $K_{IIC}$ = -9.17${\gamma}$+34.90 ($R^2$ = 0.48)

• 에너지공학
• /
• 제18권1호
• /
• pp.1-8
• /
• 2009

본 논문에서는 알루미나-물 나노유체를 사용하여 자연대류 실험을 수행하였다. 시험공간은 실린더이며 유체층 두께를 조절하여 종횡비는 10.9부터 30.4까지 변화를 주었다. 열전달계수는 순 물의 자연대류 실험과 비슷하게 30분 이내에 정상상태에 거의 도달한 것같이 보이나 경사도가 $0^{\circ}$인 경우 열전달계수가 $1{\sim}2$시간이상 감소하며 일부 종횡비에서는 열전달계수의 변동현상이 10시간이상 측정되었다. 변동형태와 주기는 종횡비와 각도에 따라 다르며 $0^{\circ}$의 경사도에서는 열전달계수의 변동주기가 $60^{\circ}$의 경사도에 비하여 2배 이상 이였다. Rayleigh 수가 $1.0{\times}10^5$ 보다 작은 경우, 평균 Nusselt 수는 $30^{\circ}$의 경사도에서 가장 높게 나타나며 $60^{\circ}$의 경사도에서 가장 낮게 나타났다. 그러나 본 실험결과도 응집된 상태의 나노유체가 사용되었으므로 일반성을 가지고 있지는 않는다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• 사상체질의학회지
• /
• 제5권1호
• /
• pp.87-104
• /
• 1993

This study was performed to analize the possibility of validation about Questionaire of Sasang constitution Classification which has been made through several stages for the purpose of promoting the objectivity of Sasang constitutional classification. The results of statistical research about the responses data of Sasang Questionaire are as follow: 1. In the case of mutual relation between the items of the QSCC(Questionaire of Sasang Constitution Classification) and 16PF, every item displaced singnificant result.(in male group) 2. In the investigation to classify the score distribution of Sasang items three groups and analize the gap of mean value in each of 16PF, the characters of each Sasang group were turn out as follows: (1) The Taee-Yang group has extrovert and narcissistic inclination. (2) The So-Yang group shows remarkable extrovert inclination. (3) The Tae-Eum group has hidden fear and introvert inclination. (4) The So-Eum group has revealed physical unstability and introvert inclination. 3. The statistical research of female group didn't display any significant result. It will be necessary to analize the respondent shape of female group and introduce new items to coincident with faminine psychology. 4. In the research using 16PF accompany with QSCC in order to classify the Sasang constitution, the accuracy rate of diagnosis showed inspiring elevation. For that reason, it seems to be desirable to introduce some items of 16PF into QSCC. According to above results, although QSCC contains several problems to be solved, its validity was proved, and the analysis of statistics suggests the possibility to step forward by introducing 16PF in some problems of promoting the accuracy of Sasang Constitutional diagnosis, assuring the objectibity of Sasang constitution classification and so on.

• 태양에너지
• /
• 제11권1호
• /
• pp.61-68
• /
• 1991

본 연구는 장방형 발열체 주위에서의 열전달 특성을 고려하기 위하여 주위유체가 공기인 정상, 층류 상태하에서 수평단열판에 등온 사각비임이 부착된 경우 발열체 주위에서의 자연대류 열전달현상을 단열판의 경사각과 Rayleigh수를 변수로 하여 실험적으로 고찰하였다. 단열판의 경사각 ${\theta}$를 변화시킴으로써 비임의 수평 및 수직표면에 의해 형성되는 열상승류의 영향에 따라 서로 다른 온도장과 유동장이 형성되었고 ${\theta}=45^{\circ}$인 경우의 직각모서리를 제외한 나머지 직각모서리에서 가열된 상승류의 상호작용에 의해 국소 Nusselt수가 증가하였다. Rayleigh수가 증가함에 따라 ${\theta}=90^{\circ}$인 경우 $X_2$표면에서의 Thermal depression 현상이 가장 현저하였으며, ${\theta}=-45^{\circ}$인 경우 $X_1$ 표면에서의 유동 정체현상이 가장 심하였다. 단열판의 경사각을 변화시켜 실험 고찰한 결과 전평균 Nusselt수는 ${\theta}=45^{\circ}$인 경우 최대, ${\theta}=-45^{\circ}$인 경우 최소였다.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• 복식문화연구
• /
• 제8권5호
• /
• pp.668-680
• /
• 2000

The study presents the general types and individual differences of the shape of the adult women's neck and shoulder in our country. It is based on the average value, the standard deviation, the maximum value, the standard deviation, the maximum value, the minimum value and c.v. measured from the women at the age of 19 through 64. The results of this study are as follows ; 1. The factors by factor analysis are five. The first is the size factors of the neck and shoulder. The second is shape factor of neck. The third is plane view and length factor of the neck. The fourth is the side view factor of the neck and shoulder. The fifth is the shape factor of shoulder. Therefore the shape of the neck and shoulder should be examined in the shape factors as well as in the size factors as well as in the size factors for the designing body-suitable clothes. 2. The factors of the concrete objects are the solid view of neck and shoulder, the cross-sectional view of neck line, side view of neck and shoulder and length of neck. The explainable measuring items for the factors are the difference of the length between lower neck round line and the 4㎝ above neck round line, the length of neck, the angle of inclination between fore neck and back neck, the angle of inclination of the side shoulder, the difference of the height between fore neck point and back neck point, the width of shoulder, the width of chest and the width of back. 3. The concrete objects of the neck and shoulder have five types ; Type Ⅰ is average type, Type Ⅱ is thick short neck and the drooping shoulder type, Type Ⅲ I is slender long neck and lean-back shoulder type, Type Ⅳ is thick and rising shoulder type and Type Ⅴ is slender and drooping shoulder type.

• 한국항해항만학회지
• /
• 제44권3호
• /
• pp.166-173
• /
• 2020

항로표지사고는 통항선박의 항행위험을 초래하고, 항로표지의 신뢰성을 저하시킬 수 있다. 해상에 가장 많이 설치·운영되고 있는 등부표는 바람, 조류, 파도 등 해양기상의 영향으로 인한 사고율이 가장 높다. 그러나 우리나라 등부표 설치해역별 해양기상조건이 다름에도 불구하고, 등부표의 동적안정성 계산에 있어 전 해역에 일류적인 극한조건만을 적용하고 있는 문제점이 있다. 따라서 본 연구의 목적은 등부표 중 해상에 가장 많이 설치되어 있는 LL-26(M) 등부표의 동적안정성을 분석하여, LL-26(M) 등부표의 안정적인 운영 방안을 제시하는 것이다. 이를 위해 등부표와 관련한 선행연구의 해역별 기상을 분석한 후, 해양기상에 의한 사고발생 횟수가 많은 해역별 대표 등부표에 적용하여 동적안정성(경사각)을 추정하였다. 연구결과 각 해역별 LL-26(M) 등부표의 경사각은 상이하였다. 즉, 바람에 의한 경사각은 10.329°~36.868°이고, 조류에 의한 경사각은 0.123°~18.834°이며, 파도에 의한 경사각은 4.777°~20.695°로 나타났다. 이러한 연구결과는 LL-26(M) 등부표의 안정적 운영을 위한 해역별 설치기준 마련에 유용한 기초자료로 활용될 수 있을 것이다.

• 한국조리학회지
• /
• 제22권6호
• /
• pp.98-104
• /
• 2016

In comparison to the rapid rise in the number of restaurant daily deal service consumer complaints, relatively little attention has been directed at the features of deal consumers' complaint behaviors in academic research. In order to address this gap, this study examined the characteristics of complaint behaviors of consumers who purchase restaurant deals with a focus on three potential determinants (likelihood of success with the complaint, attitude toward complaining, and severity of the failure). Results indicated that the three proposed determinants emerged as critical factors that influence deal consumers to exhibit different complaint reactions to dissatisfactory experiences. Furthermore, it was discovered that the hypothesized relationships were moderated by value consciousness, in which high value-conscious deal consumers exhibited a higher complaint inclination than low-value conscious deal consumers.

• 대한치과교정학회지
• /
• 제35권2호
• /
• pp.91-105
• /
• 2005

기존의 2차원적 진단자료는 상의 확대 및 왜곡으로 인해 형태나 크기의 정량적 평가시 부적절한 결과를 야기할 수 있어 안면비대칭의 정확한 진단과 치료계획 수립을 위해서는 3차원영상 진단의 도입이 필요하다. 본 연구는 안면비대칭 진단시 3차원적 분석에 도움이 되는 기준자료를 얻고자 정상교합자를 대상으로 하악골 3차원 영상 계측항목의 평균값과 좌우차이의 정상범주를 알아보기 위하여 시행되었다 뚜렷한 안면비대칭을 보이지 않는 성인 정상교합자 남녀 30명씩 총 80명을 대상으로 두경부 전산화단층사진을 촬영한 후 컴퓨터프로그램을 이용한 각각의 단면 촬영영상 정보를 이용하여 3차원 입체영상을 재구성한 다음, 하악골 비대칭시 좌우차이를 보일 수 있는 계측항목으로 ramus length를 나타내는 5개 condylar neck length를 나타내는 1개, mandibular body length를 나타내는 8개 등 15개의 거리 계측항목과, gonial angle을 나타내는 4개. frontal ramal inclination을 나타내는 2개. lateral ramal inclination을 나타내는 2개 등 8개의 각도계측항목, 총 23개의 계측항목을 설정한 후, 좌측과 우측을 구분하여 컴퓨터 상에서 3차원계측치를 구하고 좌우차이값을 산출하였다. 본 연구결과 얻어진 정상교합자의 하악골 3차원영상 계측항목의 좌우차이값은 안면비대칭 환자의 진단 기준치로 유용하게 사용될 수 있을 것이다.